• Title/Summary/Keyword: range expansion

Search Result 846, Processing Time 0.03 seconds

Effect of cold working on the thermal expansion and mechanical properties of Fe-29%-Ni-17%Co low thermal expansion alloy (Fe-29%Ni-17%Co 저열팽창성 합금의 기계적 및 열팽창 특성에 미치는 냉간 가공의 영향)

  • Lee, Kee-Ahn;Kim, Song-Yi;NamKung, Jung;Kim, Mun-Chul
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2009.05a
    • /
    • pp.355-356
    • /
    • 2009
  • The change of thermal expansion and mechanical behaviors by cold working has been investigated in Fe-29%Ni-17%Co low thermal expansion Kovar alloy. Fe-29%Ni-17%Co alloy was cold rolled gradually and prepared to plates having reduction ratio of 0%, 20%, 40%, 60%, and 80%. Annealing effect on the properties was also studied. Thermal expansion was measured from $25^{\circ}C$ to $600^{\circ}C$ with a heating rate of $5^{\circ}C$/min by using vacuum differential dilatometer. It was found that thermal expansion coefficient ($\alpha_{30{\sim}400}$) slightly decreased (reduction ration of 20%) and then remarkably increased (above reduction ration of 40%) with increasing reduction ratio of cold rolling. Thermal expansion coefficient ($\alpha_{30{\sim}400}$) was sharply decreased after annealing heat-treatment. Yield and tensile strengths were continuously increased and elongation was decreased by cold roiling. Microstructural observation and X-ray diffraction analysis results showed that the $\alpha$ phase significantly increased as the reduction ratio increased. The slight decrease of thermal expansion coefficient bellow reduction ration of 20% could be explained by the destroying short-range ordering and the decreasing of grain size. The significant increase of thermal expansion coefficient with cold rolling mainly attributed to the appearance of $\alpha$ phase. The correlation between the microstructural cause and invar phenomena for the low thermal expansion behavior was also discussed.

  • PDF

Interference Management with Cell Selection using Cell Range Expansion and ABS in Heterogeneous Network based on LTE-Advanced (LTE-Advanced 기반 이종 네트워크에서 셀 영역 확장에 대한 셀 선택과 ABS를 통한 간섭 관리 기법)

  • Moon, Sangmi;Kim, Bora;Malik, Saransh;Kim, Daejin;Hwang, Intae
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.8
    • /
    • pp.39-44
    • /
    • 2013
  • Long Term Evolution (LTE) - Advanced has developed Heterogeneous Network (HetNet) that consists of a mix of macrocells and low-power nodes such as picocells to improve the system performance. Also, to encourage data offloading in HetNet, Cell Range Expansion (CRE) have been introduced. In this paper, we propose a cell selection scheme based on Signal to Interference plus Noise Ratio (SINR) for optimal offloading effect. And we manage the interference for user located in cell range expanded region using Almost Blank Subframe (ABS) with flexible ABS ratio to improve the spectrum efficiency in time domain. Simulation results show that proposed scheme can improve spectrum efficiency of macrocell and picocell user. Eventually, proposed scheme can imporve overall user performance.

EXPANSION VELOCITY INVESTIGATION OF THE ELLIPTICAL PLANETARY NEBULA NGC 6803

  • Choi, Youn-Su;Lee, Seong-Jae;Hyung, Siek
    • Journal of The Korean Astronomical Society
    • /
    • v.41 no.6
    • /
    • pp.163-172
    • /
    • 2008
  • Using the spectral data in the 3700 to $10050{\AA}$ wavelength range secured with the Hamilton Echelle Spectrograph (HES) at the Lick observatory, we have investigated the expansion velocities and the physical conditions of the elliptical planetary nebula NGC 6803. Various forbidden and permitted lines, e.g. HI, HeI, HeII, [OIII], [NII], [ArIII], and [SII], indicate complicated but systematic physical conditions variation: electron temperatures $T_{\varepsilon}\;{\sim}\;9000$ - 11000 K and electron number densities $N_{\varepsilon}\;{\sim}\;2000$ - $9000\;cm^{-3}$. The line profile analysis of these ions also indicates the systematic change or the acceleration of the expansion velocities in the range of 10 - $22\;km\;s^{-1}$. We show that the velocity gradient and physical condition found in various ions are closely related to the prolate ellipsoidal structure of NGC 6803. The expansion velocity and the ionic abundance of $O^{2+}$ were derived based on the OII and [OIII] lines. In spite of the discrepancy of ionic abundances derived by the two cases and their line profiles, the expansion velocities of them agree well. We find that the ratios of the red to blue line component of the HeII & OII lines are different from those of the [OIII] or other forbidden lines that indicates a possible involvement of emission of HeII & OII lines. This subtle difference and the different physical condition of the lines are likely to be caused by the elongated geometry and the latitude dependence of the emission zone.

Study on the Expansion Technique of Compressor Characteristic Map to Sub-Idle Range (저속영역으로의 압축기 특성맵 확장기법 연구)

  • Jun, Yong-Min;Choi, Jong-Su
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.15 no.5
    • /
    • pp.54-59
    • /
    • 2011
  • Reliable starting capability of a gas turbine engine calls the engine industry's attention recently. So far the gas turbine engine performance researches have focused on the range between idle to Max rpm, but recent attention on the starting has brought interests in the range of "Sub-dile". As component characteristic maps are essential for the starting research, various kinds of studies have been doing and proposing ways to expand the existing maps toward sub-idle range. In this paper, previous studies were discussed and a new method suggested and validated.

Study on the Expansion Technique of Compressor Characteristic Map to Sub-Idle range (저속영역으로의 압축기 특성맵 확장기법 연구)

  • Jun, Yong-Min;Lim, Byung-Jun;Rhee, Dong-Ho;Choi, Jong-Su
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.694-699
    • /
    • 2010
  • Reliable starting capability of a gas turbine engine calls the engine industry's attention recently. So far the gas turbine engine performance researches have focused on the range between idle to Max rpm, but recent attention on the starting has brought interests in the range of "Sub-dile". As component characteristic maps are essential for the starting research, various kinds of studies have been doing and proposing ways to expand the existing maps toward sub-idle range. In this paper, previous studies were discussed and a new method suggested and validated.

  • PDF

Climate Change Adaptation Policy and Expansion of Irrigated Agriculture in Georgia, U.S.

  • Park, ChangKeun
    • Asian Journal of Innovation and Policy
    • /
    • v.10 no.1
    • /
    • pp.68-89
    • /
    • 2021
  • The expansion of irrigated agricultural production can be appropriate for the southeast region in the U.S. as a climate change adaptation strategy. This study investigated the effect of supplemental development of irrigated agriculture on the regional economy by applying the supply side Georgia multiregional input-output (MRIO) model. For the analysis, 100% conversion of non-irrigated cultivable acreage into irrigated acreage for cotton, peanuts, corn, and soybeans in 42 counties of southwest Georgia is assumed. With this assumption, the difference in total net returns of production between the non-irrigation and irrigation method is calculated as input data of the Georgia MRIO model. Based on the information of a 95% confidence interval for each crop's average price, the lower and upper bounds of estimated results are also presented. The total impact of cotton production was $60 million with the range of $35 million to $85 million: The total impact of peanuts, soybeans, corn was $10.2 million (the range of $3.28 million to $23.7 million), $6.6 million (the range of $3.1 million to $10.2 million), $1.2 million (the range of -$6 million to $8.5 million), respectively.

A Study on the Microstructural Control of LAS Ceramics (II): Influence of L$Li_2O{cdot}4B_2O_3$ Frit Addition on the Microstructure and Thermal Expansion of ${\beta}$-Spodumene (LAS계 내열충격성 재료의 미세구조 제어(II): $Li_2O{cdot}4B_2O_3$ 프릿트 첨가가 ${\beta}$-Spodumene의 미세구조 및 열팽창특성에 미치는 영향)

  • 박정현;김현민;이화선
    • Journal of the Korean Ceramic Society
    • /
    • v.29 no.7
    • /
    • pp.533-538
    • /
    • 1992
  • Effect of Li2O.4B2O frit on the microstructural and thermal expansion behaviour of $\beta$-spodumene ceramics was investigated. With 4.0~8.0 wt.% frit addition, sintering temperature range was enlarged and densification was enhanced through liquid phase sintering. As the amount of frit addition was increased, thermal expansion coefficient was increased to 1.72$\times$10-6$^{\circ}C$-1 of its highest value, which indicated that the increment of thermal expansion coefficient due to the second phase was constrained.

  • PDF

A Study on the Microstructural Control of LAS Ceramics (I): $Li_O$.$4B_2O_3$ Frit Addition on the Microstructure and Thermal Expansion of $\beta$-Eucryptite Ceramics (LAS계 내열충격성 재료의 미세구조 제어 (I): $Li_O$.$4B_2O_3$ 프릿트 첨가가 $\beta$-Eucryptite 세라믹스의 미세구조 및 열팽창특성에 미치는 영향)

  • 박정현;김현민;이화선
    • Journal of the Korean Ceramic Society
    • /
    • v.28 no.5
    • /
    • pp.415-421
    • /
    • 1991
  • Influence of Li2O.4B2O3 frit addition on the microstructure and thermal expansion properties of $\beta$-eucryptite ceramics was studied. With 1.0~10.0wt% frit addition, sintering temperature range was enlarged and densified body was obtained. Thermal expansion was increased from -6.67$\times$10-6 $^{\circ}C$-1 of pure sintered body to 1.03$\times$10-6$^{\circ}C$-1 of 6 wt% added body, but this increasement was accompanied by inhibition of thermal expansion anisotropy, so that improved microcracking property.

  • PDF

The Performance of a Heat Pump with a Variation of Expansion Valve at Various Charging Conditions (냉매 충전량과 팽창장치 변화에 따른 열펌프 시스템의 성능특성에 관한 연구)

  • 최종민;김용찬
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.15 no.8
    • /
    • pp.661-666
    • /
    • 2003
  • Constant area expansion devices such as capillary tubes, short tube orifices are being gradually replaced with electronic expansion valves (EEVs) because of increasing focus on comfort and energy conservation. In this study, the performance of a water-to-water heat pump as a function of refrigerant charge is investigated in steady state, cooling mode operation with expansion devices of a capillary tube and an EEV. The performance of the capillary tube system varies drastically according to the change of refrigerant charge amount and inlet temperature of the secondary fluid in the condenser. Cooling capacity and COP of the EEV system show little dependence on the refrigerant charge, while those are strongly dependent on the secondary fluid temperature at the condenser inlet. In general, for a wide range of operating conditions the EEV system shows much higher performance as compared with the capillary tube system. The performance of the EEV system can be optimized by adjusting EEV opening to maintain a constant superheat at all test conditions.