• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1539-1542
• /
• 2009

Using one-range addition theorems for Slater type orbitals (STOs) and Coulomb-Yukawa like correlated interaction potentials (CIPs) introduced by the author, the series expansion formulae are derived for the multicenter multielectron integrals. The expansion coefficients occurring in these relations are presented through the overlap integrals of two STOs. The convergence of series expansion relations is tested by calculating concrete cases. The accuracy of the results is quite high for quantum number, screening constants and location of orbitals. The final results are especially useful in the calculation of multielectron properties for atoms and molecules when Hartree-Fock-Roothaan (HFR) and explicitly correlated methods are employed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.6
• /
• pp.573-579
• /
• 2013

Hydrogen engine with homogeneous charged compression ignition can achieve high efficiency by high compression ratio and rapid chemical reaction rates spatially. However, it needs to expansion of the operation range with over-all load conditions which is very narrow due to extremely high pressure rise rate. The adoption of the lean boosting in a HCCI $H_2$ engine is expected to be effective in expansion of operation range since minimum compression ratio for spontaneous ignition is decreased by low temperature combustion and increased surround in-cylinder pressure. In order to grasp its possibility by using lean boosting in the HCCI $H_2$ engine, compression ratio required for spontaneous ignition, expansion degree of the operation range and over-all engine performance are experimentally analyzed with the boosting pressure and supply energy. As the results, it is found that minimum compression ratio for spontaneous ignition is down to the compression ratio(${\varepsilon}$=19) of conventional diesel engine due to decreased self-ignition temperature, and operation range is extended to 170% in term of the equivalence ratio and 12 times in term of the supply energy than that of naturally aspirated type. Though indicated thermal efficiency is decreased by reduced compression ratio, it is over at least 46%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1314-1322
• /
• 2000

The acoustic property of reactive type single expansion chamber can be analyzed by traditional plane wave theory. This theory can be applied in low frequency range and has good performance. But this theory can't include higher order modes, therefore another method is essential to analyze acoustic filter in high frequency range. Many researcher suggested the method that can concern higher order modes, and their methods are using mode matching technique. But there is no method that can be applied to the analysis of single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber. In this paper, the method which can analyze single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber using fundamental mode matching technique, was suggested and the predictions by this method was compared with those by the finite element method, and the influence of inlet/outlet location to acoustic performance of single expansion chamber is investigated and explained by higher order mode effects.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1599-1601
• /
• 2000

To study invar alloy as a core material for large ampacity over-head transmission line which have high strength and low thermal expansion coefficient simultaneously, thermal expansion coefficient, physical properties and hardness of Fe-Ni-Co-xC alloy have been studied. It is necessary that invar alloy possess low thermal expansion coefficient and high strength for increased capacity over-head transmission line. In this paper we tried to find out the effect of carbon addition related with mechanical and physical properties. It was found that the thermal expansion coefficient and hardness were increased with carbon addition for whole composition range but the saturation magnetization was decreased except for the range of 0.1$\sim$0.4%C.

• Computers and Concrete
• /
• v.18 no.5
• /
• pp.937-950
• /
• 2016

This study applied autoclave expansion and heat curing to accelerate the hydration of concrete and investigated how these methods affect the expansion rate, crack pattern, aggregate size effect, and expansion of electric arc furnace oxidizing slag (EOS)-containing concrete. An expansion prediction model was simulated to estimate the expansion behavior over a long period and to establish usage guidelines for EOS aggregates. The results showed that the EOS content in concrete should range between 20% and 30% depending on the construction conditions, and that coarse aggregates with a diameter of ${\geq}4.75-mm$ are not applicable to construction engineering. By comparison, aggregates with a size of 1.18-0.03 mm resulted in higher expansion rates; these aggregates can be used depending on the construction conditions. On Day 21, the prediction model attained a coefficient of determination ($R^2$) of at least 0.9.

• Journal of the Korean Ceramic Society
• /
• v.29 no.12
• /
• pp.935-941
• /
• 1992

The LAS system with good thermal properties has a narrow range of firing and sintering temperature near the melting point. So it is difficult to sinter LAS to dense sintered body. In this study, the petalite (Li2O.Al2O3.8SiO2) with good thermal properties, was taken as a base composition, and zironia was added in this composition to broaden the firing range, increase the mechanical strength, and control the thermal expansion. The thermal and mechanical properties were investigated. The results are as follows; 1. Zirconia phase was formed in LAS matrix and apparent porosity was decreased from 0.9% to 0.5%, and the mechanical strength was kincreased from 112 MPa to 190 MPa, by the densification of body. 2. The composition Li2O.Al2O3.8SiO2 has a negative thermal expansion, but the thermal expansion was changed from negative to positive with the densification and the increase of amount of synthesized zircon phase which had positive thermal expansion. The coefficient of thermal expansion, with the increase of the amount of additives, was low as -0.74~9.06$\times$10-7/$^{\circ}C$ in 20~$600^{\circ}C$, and 7.95~20.13$\times$10-7/$^{\circ}C$ in 20~80$0^{\circ}C$. 3. The mechanical strength of LZ15 (added with ZrO2.SiO2 15 wt%) composition thermal-shocked was stable in the temperature range of 0~$600^{\circ}C$, but rapidly decreased due to the increase of thermal expansion above $600^{\circ}C$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.815-824
• /
• 2013

Pneumatic exciters can be good replacements of electrodynamic, piezoelectric and hydraulic exciters owing to simple structure and large exciting force. One problem to be solved is a slow response caused by compressibility of air. Desirable frequency response characteristics of exciter are constant magnitude and zero degree phase, because users want no time delay between input signal and output force. For this reason, frequency range of pneumatic exciters is limited about 0~1 Hz. Therefore, expansion of frequency range is an important issue when designing the pneumatic exciter. In this paper, the pneumatic exciter which has same structure with active pneumatic isolator is dealt with. The dynamic characteristics are presented, and its limitation of expanding frequency range is shown based on analytical studies. Then the pneumatic exciter with dual-chamber is suggested to overcome this problem. Based on simulation study, a design method is presented.

• The Journal of Korea Robotics Society
• /
• v.13 no.2
• /
• pp.79-85
• /
• 2018

This study focuses on autonomous exploration based on map expansion for an underwater robot equipped with acoustic sonars. Map expansion is applicable to large-area mapping, but it may affect localization accuracy. Thus, as the key contribution of this paper, we propose a method for underwater autonomous exploration wherein the robot determines the trade-off between map expansion ratio and position accuracy, selects which of the two has higher priority, and then moves to a mission step. An occupancy grid map is synthesized by utilizing the measurements of an acoustic range sonar that determines the probability of occupancy. This information is then used to determine a path to the frontier, which becomes the new search point. During area searching and map building, the robot revisits artificial landmarks to improve its position accuracy as based on imaging sonar-based recognition and EKF-SLAM if the position accuracy is above the predetermined threshold. Additionally, real-time experiments were conducted by using an underwater robot, yShark, to validate the proposed method, and the analysis of the results is discussed herein.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1758-1761
• /
• 1997

The problem of long range capacity expansion planing for chemical processing network under uncertain demand forecast secnarios is addressed. This optimization problem involves capactiy expansion timing and sizing of each chemical processing unit to maximize the expected net present value considering the deviation of net present values and the excess capacity over a given time horizon. A multiperiod mixed integer nonlinear programming optimization model that is both solution and modle robust for any realization of demand scenarios is developed using the two-stage stochastic programming algorithm. Two example problems are considered to illustrate the effectiveness of the model.

• Structural Engineering and Mechanics
• /
• v.8 no.4
• /
• pp.343-360
• /
• 1999

This work applies a structural analysis method based on an analytical solution from the Fourier series which transforms a half-range cosine expansion into a static solution involving plated structures. Two sub-matrices of in-plane and plate-bending problems are also formulated and coupled with the prescribed boundary conditions for these variables, thereby providing a convenient basis for a numerical solution. In addition, the plate connection are introduced by describing the connection between common boundary continuity and equilibrium. Moreover, a simple computation scheme is proposed. Numerical results are then compared with finite element results, demonstrating the numerical scheme's versatility and accuracy.