• Journal of the military operations research society of Korea
• /
• v.18 no.2
• /
• pp.96-113
• /
• 1992

A time-varying nonhomogeneous poisson process approximation of the nonexponential stochastic Lanchester model is defined and evaluated over a range of combat parameters including initial force sizes. breakpoints. and interkilling random variables. The proposed approximation is far excellent and takes much less CPU time than the existing models. The sensitivity analysis was peformed to evaluate the efficiency of the proposed model and three recommended factors are suggested to guide the combat operators.

• Wind and Structures
• /
• v.6 no.6
• /
• pp.437-450
• /
• 2003

In this paper, the structural random response due to the turbulent boundary layer excitation is investigated. Using the mode shapes and natural frequencies of an undamped structural operator, a fully analytical model has been assembled. The auto and cross-spectral densities of kinematic quantities are so determined through exact analytical expansions. In order to reduce the computational costs associated with the needed number of modes, it has been tested an innovative methodology based on a scaling procedure. In fact, by using a reduced spatial domain and defining accordingly an augmented artificial damping, it is possible to get the same energy response with reduced computational costs. The item to be checked was the power spectral density of the displacement response for a flexural simply supported beam; the very simple structure was selected just to highlight the main characteristics of the technique. In principle, it can be applied successfully to any quantity derived from the modal operators. The criterion and the rule of scaling the domain are also presented, investigated and discussed. The obtained results are encouraging and they allow thinking successfully to the definition of procedure that could represent a bridge between modal and energy methods.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.177-183
• /
• 2007

Active queue management (AQM) refers to a family of packet dropping mechanisms for router queues that has been proposed to support end-to-end congestion control mechanisms in the Internet. The proposed AQM algorithm by the IETF is Random Early Detection (RED). The RED algorithm allows network operators simultaneously to achieve high throughput and low average delay. However. the resulting average queue length is quite sensitive to the level of congestion. In this paper, we propose the Refined Adaptive RED(RARED), as a solution for reducing the sensitivity to parameters that affect RED performance. Based on simulations, we observe that the RARED scheme improves overall performance of the network. In particular, the RARED scheme reduces packet drop rate and improves goodput.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.289-303
• /
• 2022

The purpose of this study verify to influence the effect of the 4th industrial revolution recognized by airport operators on the airport management system and the moderator effects of convergence and leadership between these influence relationships. Data collected through a survey of airport operators using simple random sampling at six international airports in Korea. Data analysis performed using Structural Equation Modeling. The research results found that the 4th industrial revolution had a positive effect on the airport management system. Also, moderator effects of convergence and leadership found significant statistically. In this paper, we asserts that it should be reconstructed the airport management system as a system suitable for the era of the 4th industrial revolution. This paper provide theoretical data and directions for empirical research to airport researchers, and implications for airport enterprise managers and airport policy planners. The findings of this study are particularly helpful for international airports that have adopted the technologies of the Fourth Industrial Revolution.

• KIISE Transactions on Computing Practices
• /
• v.22 no.2
• /
• pp.95-100
• /
• 2016

In the current era of big data and cloud computing, the amount of data utilized is increasing, and various systems to process this big data rapidly are being developed. A distributed file system is often used to store the data, and glusterFS is one of popular distributed file systems. As computer technology has advanced, NAND flash SSDs (Solid State Drives), which are high performance storage devices, have become cheaper. For this reason, datacenter operators attempt to use SSDs in their systems. They also try to install glusterFS on SSDs. However, since the glusterFS is designed to use HDDs (Hard Disk Drives), when SSDs are used instead of HDDs, the performance is degraded due to structural problems. The problems include the use of I/O-cache, Read-ahead, and Write-behind Translators. By removing these features that do not fit SSDs which are advantageous for random I/O, we have achieved performance improvements, by up to 255% in the case of 4KB random reads, and by up to 50% in the case of 64KB random reads.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.125-133
• /
• 2000

Objectives : This study uses meta-analysis methodology to examine the statistical consistency and importance of random variation among results of epidemiologic studies of occupational electromagnetic field exposure and leukemia. Methods : Studies for this meta-analysis were identified from previous reviews and by asking researcher active in this field for recommendations. Overall, 27 studies of occupational electromagnetic field exposures and leukemia were reviewed. A variety of meta-analysis statistical methods have been used to assess combined effects, to identify heterogeneity, and to provide a single summary risk estimate based on a set of simiar epidemiologic studies. In this study, classification of exposure metircs on occupational epidemiologic studies are reported for (1) job classification (20 individual studies); (2) leukemia subtypes (13 individual studies); and (3) country (27 individual studies). Results : Results of this study, an inverse-variance weighted pooling of all the data leads to a small but significant elevation in risk of f 1% (OR=1.11, 95% CI : $1.06\sim1.16$) among 27 occupational epidemiologic studies. Publication bias was assessed by the 'fail-safe n' that may be not influence for all combined results exception a few categories, ie, 'power station operators' and 'electric utility workers' by job classification on occupational study. And ail combined odds ratio results were similar for fixed-effects models and random-effects models, with slightly higher risk estimates for the random-effects model in situations where there was significant heterogeneity, ie, Q-statistic significant (p<.05). Conclusions : We found a small elevation in risk of leukemia, but the ubiquitous nature of exposure to electromagnetic fields from workplace makes even a weak association a public health issue of substantial power to influence the present overall conclusion about relationship between electromagnetic fields exposure and leukemia.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.37 no.4
• /
• pp.67-72
• /
• 2012

In this paper a new method of handling linear constraints for the genetic algorithm is suggested. The method is designed to maintain the feasibility of offsprings during the evolution process of the genetic algorithm. In the genetic algorithm, the chromosomes are coded as the vectors in the real vector space constrained by the linear constraints. A method of handling the linear constraints already exists in which all the constraints of equalities are eliminated so that only the constraints of inequalities are considered in the process of the genetic algorithm. In this paper a new method is presented in which all the constraints of inequalities are eliminated so that only the constraints of equalities are considered. Several genetic operators such as arithmetic crossover, simplex crossover, simple crossover and random vector mutation are designed so that the resulting offspring vectors maintain the feasibility subject to the linear constraints in the framework of the new handling method.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.183-192
• /
• 2000

This paper considers the problem of scheduling a set of n jobs on m parallel machines to minimize total weighted tardiness. For the problem a genetic algorithm is proposed, in which solutions are encoded using the random key method suggested by Bean and new crossover operators are employed to increase performance of the algorithm. The algorithm is compared with the Modified Due-Date (MDD) algorithm after series of tests to find appropriate values for genetic parameters. Results of computational tests on randomly generated test problems show that the suggested algorithm performs better than the MDD algorithm and gives good solutions in a reasonable amount of computation time.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.36-40
• /
• 1988

The time correlation functions of concentration fluctuations due to the random forces near the steady state are evaluated for a general two-component nonlinear chemical system by solving the corresponding two dimensional Fokker-Planck equation. The approximate method of solving the Fokker-Planck equation is based on the eigenfunction expansion and the corresponding eigenvalues for both the linear and nonlinear Fokker-Planck operators are obtained near the steady state. The general results are applied to the Lotka model near the oscillatory marginal steady state and the comparison is made between linear and nonlinear cases.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.3
• /
• pp.365-373
• /
• 2010

Many studies on safety issues of human-machine interaction are being conducted, especially taking emergency situations into consideration. In light of this view, the importance of objective and reliable measurement of users' reactions under emergency situations is becoming more important than ever in reflecting such issues in the design of everyday things. However, despite the need to consider the human-machine interactions and human performances at the design stage, there were few studies which considered human performances and behaviors under emergency situations. This study is about an evaluation method and design guide to include such human performances under emergency situations during human-machine interactions. This is achieved through an experiment where operators are instructed to press the emergency button at an experimentally designed location under a random emergency situation. By analyzing the results in a human factors perspective, the response time and the accuracy of the operators' behaviors are explained. Analysis revealed that in designing the center fascia for automobiles, there is a tradeoff between response time and accuracy, and the optimal size of buttons differ in each part of the center fascia. This method is expected to be applicable to industrial situations to derive optimal position for emergency buttons.