• Structural Engineering and Mechanics
• /
• 제4권3호
• /
• pp.277-301
• /
• 1996

A finite element model of a beam element with flexible connections is used to investigate the effect of the randomness in the stiffness values on the modal properties of the structural system. The linear behavior of the connections is described by a set of random fixity factors. The element mass and stiffness matrices are function of these random parameters. The associated eigenvalue problem leads to eigenvalues and eigenvectors which are also random variables. A second order perturbation technique is used for the solution of this random eigenproblem. Closed form expressions for the 1st and 2nd order derivatives of the element matrices with respect to the fixity factors are presented. The mean and the variance of the eigenvalues and vibration modes are obtained in terms of these derivatives. Two numerical examples are presented and the results are validated with those obtained by a Monte-Carlo simulation. It is found that an almost linear statistical relation exists between the eigenproperties and the stiffness of the connections.

• Journal of Communications and Networks
• /
• 제3권4호
• /
• pp.334-341
• /
• 2001

The provision of QoS control is a key of the successful deployment of multimedia networks. Buffer management plays an important role in QoS control. Therefore, this paper proposes a novel QoS buffer management algorithm named GREEN (Global Random Early Estimation for Nipping), which extends the concepts of ERD (early random drop) and RED (random early detection). Specifically, GREEN enhances the concept of "Random" to "Global Random" by globally considering the random probability function. It also enhances the concept of "Early" to "Early Esti mation" by early estimating the network status. For performance evaluation, except compared with RED, extensive simulation cases are performed to probe the characteristics of GREEN.

• 한국지능시스템학회논문지
• /
• 제8권3호
• /
• pp.71-79
• /
• 1998

본 논문은 유전알고리즘과 random tabu 탐색법을 조합한 새로운 최적화 알고리즘을 제안한다. 유전알고리즘과 전역적인 최적해에 대한 탐색능력이 우수하고, random tabu 탐색법은 최적해에의 수렴속도가 매우 빠른 알고리즘이다. 본 논문에서는 이 두 알고리즘의 장점을 이용해서 수렴정도와 수렴속도가 더욱 향상된 최적알고리즘을 제안하여 알고리즘의 수렴성능을 조사하고, 실제 최적화문제로서 지진응답을 최소로 하기위한 배관지지대의 최적배치문제에 적용하여 기존의 방법과 비교를 통하여 유용성을 검토하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.508-512
• /
• 2004

An aerospace vehicle in flight can be exposed to random gust which may cause critical structural failure. In this paper, the failure analysis is conducted for composite wing subjected to random gust. For this, the profile of random gust is idealized as a stationary Gaussian random process and the power spectral density (PSD) of wing bending moment induced by gust is obtained. The PSD function is converted to probabilistic distributions and the failure probability during total flight time is calculated by Monte Carlo simulation.

• Journal of applied mathematics & informatics
• /
• 제28권1_2호
• /
• pp.515-521
• /
• 2010

In multivariate analysis, the inversion formula of the Stieltjes transform is used to find the density of a spectral distribution of random matrices of sample covariance type. Let $B_n\;=\;\frac{1}{N}Y_nY_n^TT_n$ where $Y_n\;=\;[Y_{ij}]_{n\;{\times}\;N}$ is with independent, identically distributed entries and $T_n$ is an $n\;{\times}\;n$ symmetric non-negative definite random matrix independent of the $Y_{ij}$'s. In the present paper, using the inversion formula of the Stieltjes transform, we will find that the limiting distribution of $B_n$ has a continuous density function away from zero.

• 소음진동
• /
• 제9권4호
• /
• pp.778-784
• /
• 1999

A method for obtaining the motion of an impact system whose primary and secondary system are composed of lumped masses, springs and dampers, and all the contacts are made through spring and damping elements is presented. The frequency response functions derived from the equations of motion and the impulse response functions obtained from the inverse Fourier transform of the derived frequency response functions are used for the calculation of the system responses. The procedure developed for the calculation of displacements and force time-histories was based on the convolution integrals of impulse response functions and forces applied to the systems. Time histories of displacements and contact forces are obtained for the case where a random excitation is applied to a point in the system. Impact statistics such as contact forces and the time between impacts calculated from those time histories is presented.

• Structural Engineering and Mechanics
• /
• 제43권6호
• /
• pp.835-845
• /
• 2012

This paper focuses on the stochastic response analysis of industrial masonry chimneys to surface blast-induced random ground motions by using a three dimensional finite element model. Underground blasts induce ground shocks on nearby structures. Depending on the distance between the explosion centre and the structure, masonry structures will be subjected to ground motions due to the surface explosions. Blast-induced random ground motions can be defined in terms of the power spectral density function and applied to each support point of the 3D finite element model of the industrial masonry system. In this paper, mainly a parametric study is conducted to estimate the effect of the blast-induced ground motions on the stochastic response of a chimney type masonry structure. With this purpose, different values of charge weight and distance from the charge centre are considered for the analyses of the chimney. The results of the study underline the remarkable effect of the surface blast-induced ground motions on the stochastic behaviour of industrial masonry type chimneys.

• Steel and Composite Structures
• /
• 제11권2호
• /
• pp.115-130
• /
• 2011

Considering the randomness of material parameters in the laminated composite plate, a scheme of stochastic finite element method to analyze the displacement response variability is suggested. In the formulation we adopted the concept of the weighted integral where the random variable is defined as integration of stochastic field function multiplied by a deterministic function over a finite element. In general the elastic modulus of composite materials has distinct value along an individual axis. Accordingly, we need to assume 5 material parameters as random. The correlations between these random parameters are modeled by means of correlation functions, and the degree of correlation is defined in terms of correlation coefficients. For the verification of the proposed scheme, we employ an independent analysis of Monte Carlo simulation with which statistical results can be obtained. Comparison is made between the proposed scheme and Monte Carlo simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.958-961
• /
• 1999

A new image encoding and identification scheme is proposed for security verification by using CGH(computer generated hologram), random phase mask, and correlation technique. The encrypted image, which is attached to the security product, is made by multiplying QPH(quadratic phase hologram) using SA(simulated annealing) algorithm with a random phase function. The random phase function plays a role of key when the encrypted image is decrypted. The encrypted image could be optically recovered by 2-f system and automatically verified for personal identification. Simulation results show the proposed method cand be used for the reconstruction and the recognition of the encrypted. Image.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.19-22
• /
• 2000

A new image encoding and identification scheme is proposed for security verification by us-ing a CGH(computer generated hologram), random phase mask, and a correlation technique. The encrypted image, which is attached to the security product, is made by multiplying a QP- CGH(quadratic phase CGI) with a random phase function. The random phase function plays a key role when the encrypted image is decrypted. The encrypted image can be optically recovered by a 2-f imaging system and automatically verified for personal identification by a 4-f correlation system. Simulation results show the proposed method can be used for both the reconstruction of an original image and the recognition of an encrypted image.