• 한국농공학회논문집
• /
• 제60권2호
• /
• pp.1-11
• /
• 2018

Probable Maximum Flood (PMF) is mostly applied for the designs of large-scale hydraulic structures and it is estimated by computing the runoff hydrograph where Probable Maximum Precipitation (PMP) is inserted as design rainfall. The existing PMP is estimated by transferring the heavy rainfall from all watersheds of korea to the design watershed, however, in this study, PMP was analyzed by selecting only rainfall events occurred in the design watershed. And then, Catchment-scale Soil Erosion Model (CSEM) was used to estimate the PMF and sediment-runoff yield according to the watershed-based estimated PMP. Although the PMF estimated in this study was lower than the existing estimated PMF in the Yongdam-dam basin, it was estimated to be higher than the 200-year frequency design flood discharge. In addition, sediment-runoff yield was estimated with a 0.05 cm of the maximum erosion and a 0.06 cm of the maximum deposition, and a total sediment-runoff yield of 168,391 tons according to 24-hour PMP duration.

• 한국환경과학회지
• /
• 제18권1호
• /
• pp.1-7
• /
• 2009

In this study a sediment yield is compared by IUSG, IUSG with Kalman filter, tank model and tank model with Kalman filter separately. The IUSG is the distribution of sediment from an instantaneous burst of rainfall producing one unit of runoff. The IUSG, defined as a product of the sediment concentration distribution (SCD) and the instantaneous unit hydrograph (IUH), is known to depend on the characteristics of the effective rainfall. In the IUSG with Kalman filter, the state vector of the watershed sediment yield system is constituted by the IUSG. The initial values of the state vector are assumed as the average of the IUSG values and the initial sediment yield estimated from the average IUSG. A tank model consisting of three tanks was developed for prediction of sediment yield. The sediment yield of each tank was computed by multiplying the total sediment yield by the sediment yield coefficients; the yield was obtained by the product of the runoff of each tank and the sediment concentration in the tank. A tank model with Kalman filter is developed for prediction of sediment yield. The state vector of the system model represents the parameters of the tank model. The initial values of the state vector were estimated by trial and error.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권1호
• /
• pp.29-36
• /
• 1998

An instantaneous unit sediment graph (IUSG) model is investigated for prediction of sediment yield from an upland watershed in Northwestern Mississippi. Sediment yields are predicted by convolving source runoff with an IUSG. The IUSG is the distribution of sediment from an instantaneous burst of rainfall producing one unit of runoff. The IUSG, defined as a product of the sediment concentration distribution (SCD) and the instantaneous unit hydrograph (IUH), is known to depend on the characteristics of the effective rainfall. The IUH is derived by the Nash model for each event. The SCD is assumed to be an exponential function for each event and its parameters were correlated with the effective rainfall characteristics. A sediment routing function, based on travel time and sediment particle size, is used to predict the SCD.

• 한국환경과학회지
• /
• 제2권1호
• /
• pp.29-36
• /
• 1993

An instantaneous unit sediment graph (IUSG) model is investigated for prediction of sediment yield from an upland watershed In Northwestern Mississippi. Sediment yields are predicted by convolving source runoff with an IUSG. The IUSG is the distribution of sediment from an instantaneous burst of rainfall producing one unit of runoff. The IUSG, defined as a product of the sediment concentration distribution (SCD) and the instantaneous unit hydrograph (IUH), is known to depend on the characteristics of the effective rainfall. The IUH is derived by the Nash model for each event. The SCD is assumed to be an exponential function for each event and its parameters were correlated with the effective rainfall characteristics. A sediment routing function, based on travel time and sediment particle size, is used to predict the SCD.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.693-697
• /
• 2009

Physically-based WEPP watershed version was applied to a watershed, located at Jawoon-ri, Gangwon with very detailed rainfall data, rather than daily rainfall data. Then it was validated with measured sediment data collected at the sediment settling ponds and through overland flow. The $R^2$ and the EI for runoff comparisons were 0.88 and 0.91, respectively. For sediment comparisons, the $R^2$ and the EI values were 0.95 and 0.91. Since the WEPP provides higher accuracies in predicting runoff and sediment yield from the study watershed, various slope scenarios (2%, 3%, 5.5%, 8%, 10%, 13%, 15%, 18%, 20%, 23%, 25%, 28%, 30%) were made and simulated sediment yield values were analyzed to develop appropriate soil erosion management practices. It was found that soil erosion increase linearly with increase in slope of the field in the watershed. However, the soil erosion increases dramatically with the slope of 20% or higher. Therefore special care should be taken for the agricultural field with higher slope of 20% or higher. As shown in this study, the WEPP watershed version is suitable model to predict soil erosion where torrential rainfall events are causing significant amount of soil loss from the field and it can also be used to develop site-specific best management practices.

• 한국수자원학회논문집
• /
• 제43권12호
• /
• pp.1011-1027
• /
• 2010

모형의 구조, 모델링에 사용되는 자료, 매개변수 등에 포함된 다양한 불확실성 원인들은 수문모의 및 예측결과에 있어 불확실성을 야기한다. 본 연구에서는 강우-유출 및 강우-유사유출 모의가 가능한 분포형 강우-유사-유출 모형을 용담댐 상류유역인 천천유역에 적용하여 수문곡선 및 유사량곡선의 재현성을 평가하고, 다중최적화기법인 MOSCEM을 이용하여 강우-유출 모듈, 강우-유사유출 모듈의 매개변수를 독립적으로 보정한 경우(Case I과 II), 그리고 두 모듈이 결합된 강우-유사-유출 모형의 매개변수를 동시에 보정한 경우(Case III)에 대하여 Pareto 최적해를 추정하고, 이에 따른 수문 예측결과의 불확실성을 평가한다. 매개변수 불확실성의 전이에 따른 수문곡선의 불확실성 평가 결과(Case I), 모의기간 동안 고유량보다는 저유량 부분에서 불확실성 범위가 두드러졌으며, 이에 반해, 유사량곡선의 경우(Case II) 저농도보다는 고농도 부분에서 불확실성 범위가 넓게 분포하였다. 강우-유사-유출 모형의 매개변수의 불확실성을 동시에 추정한 경우 수문곡선 및 유사량곡선 모두 Case I과 II에 비해 모의기간 전반에 걸쳐 불확실성 범위가 넓게 분포되었으며, 매개 변수의 불확실성으로 인해 대상유역내 격자별 침식 및 퇴적 공간분포 양상이 상이하게 나타났다.

• 한국수자원학회논문집
• /
• 제45권8호
• /
• pp.795-804
• /
• 2012

최근 강우강도 및 패턴이 변화함에 따라 전세계적으로 토양유실이 증가하고 있다. 그 결과, 수생태계 건전성이 악화되고, 농업작물이 피해를 입어 수확량이 감소된다. 그동안 유출 및 토양유실을 예측하거나 비점오염원을 감소시키는 연구가 많이 수행되어 왔다. USLE는 수년간 토양유실을 산정하는데 사용되어왔으나, 강우강도나 패턴변화를 적용하기에는 적절하지 못했다. 물리적 기반인 WEPP 모형은 다양한 강우강도 및 패턴변화를 적용하는데 적절하다. 본 연구에서는 WEPP 모형을 이용하여 Huff의 4분위, 다양한 강우간격, 설계강우에 따른 토양유실, 유출, 첨두유출을 산정하였다. 5분간격 강우 데이터와 60분 간격 강우 데이터를 비교한 결과 토양유실은 24%, 유출은19%, 첨두유출은 16%가 차이나는 것으로 나타났다. 유출 및 토양유실이 5분 간격 강우량에서 실측치와 가장 유사한 것으로 나타나 강우데이터의 간격이 짧을수록 더 정확하게 모의할 수 있는 것으로 나타났다. Huff의 4분위를 이용하여 토양유실량, 유출량, 첨두유출량을 산정한 결과 토양유실량, 유출량, 첨두유출량 모두 3분위에서 가장 높게 발생하는 것으로 나타났다. 강원도 홍천지역 빈도별 확률강우를 이용하여 토양유실량, 유출량, 첨두유출량의 변화를 모의하였다. 2년 빈도와 300년 빈도에서 강우량은 167% 증가하였다. 유사량과 유출량, 첨두유출량은 각각 906.2%, 249.4%, 183.9% 증가하여 유사량의 증가율이 가장 큰 것으로 나타났다. 본 연구의 결과에서 보이는 바와 같이 WEPP 모형을 이용하여 향후 기후변화에 따른 유출 및 토양유실의 예측이 가능할 것으로 판단된다.

• 한국수자원학회논문집
• /
• 제43권11호
• /
• pp.995-1009
• /
• 2010

기후변화에 의해 집중호우의 빈도 및 강도가 증가하고 지속적인 유역개발에 따른 토지이용의 증가는 토양침식 및 토사유출로 인한 재해 및 환경문제를 야기한다. 현재 광범위하게 사용되고 있는 토양침식량 산정기법은 대부분 대상유역내의 평균 토양침식량을 산출하는 총량적 개념의 경험식이므로 호우기간동안의 침식 및 퇴적의 시 공간적 변화양상을 모의할 수 없다는 한계를 지니고 있다. 따라서 보다 합리적인 유역규모의 강우-유사-유출 메카니즘 해석을 위해서는 기존의 집중형 모의기법을 대체하고 다양한 기상학적/지형학적 정보를 활용할 수 있는 물리적 기반의 분포형 모형이 요구된다. 본 연구에서는 사면의 지표 및 지표하 흐름을 고려한 유출모의 모듈과 단위수류력 이론을 기반으로 하는 유사유출 모의모듈을 결합한 분포형 강우-유사-유출 모형을 확장개발하고, 용담댐 상류부의 천천유역에 적용하여 모형의 재현성 평가를 수행하였다. 수문곡선의 모의 결과 모형의 재현성은 우수하였으며, 유사량곡선의 경우 첨두부분에서 과소선정되는 경향이 나타났다. 또한, 지표면 유동거리 및 국부경사에 따른 침식 및 퇴적의 공간분포를 분석한 결과, 침식된 토사는 비교적 경사가 완만한 하천주변에 퇴적되었으며, 강우량과 침식 및 퇴적의 공간분포의 분석결과, 강우량의 증가에 따라 침식량이 증가하였으며, Thiessen망 유역별로 침식 및 퇴적 분포는 상이하게 나타났다.

• 한국농공학회지
• /
• 제45권7호
• /
• pp.83-93
• /
• 2003

This research compared the observed and model predicted results that include; runoff, sediment yield, and nutrient losses from a 2.71 ha cattle grazing pasture field in North Alabama. Application of water quality computer simulation models can inexpensively and quickly assess the impact of pasture management practices on water quality. AGNPS single storm based model was applied to the three pasture species; Bermudagrass, fescue, and Ryegrass. While comparing model predicted results with observed data, it showed that model can reasonably predict the runoff, sediment yield and nutrient losses from the watershed. Over-prediction and under-prediction by the model occurred during very high and low rainfall events, respectively. The study concluded that AGNPS model can be reasonably applied to assess the impacts of pasture management practices and chicken litter application on water quality.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권6호
• /
• pp.66-73
• /
• 2017

Empirical erosion models like Universal Soil Loss Equation (USLE) models have been widely used to make spatially distributed soil erosion vulnerability maps. Even if the models detect vulnerable sites relatively well utilizing big data related to climate, geography, geology, land use, etc within study domains, they do not adequately describe the physical process of soil erosion on the ground surface caused by rainfall or overland flow. In other words, such models are still powerful tools to distinguish the erosion-prone areas at large scale, but physics-based models are necessary to better analyze soil erosion and deposition as well as the eroded particle transport. In this study a physics-based soil erosion modeling system was developed to produce both runoff and sediment yield time series at watershed scale and reflect them in the erosion and deposition maps. The developed modeling system consists of 3 sub-systems: rainfall pre-processor, geography pre-processor, and main modeling processor. For modeling system validation, we applied the system for various erosion cases, in particular, rainfall-runoff-sediment yield simulation and estimation of probable maximum sediment (PMS) correlated with probable maximum rainfall (PMP). The system provided acceptable performances of both applications.