• 한국수자원학회논문집
• /
• 제39권4호
• /
• pp.335-346
• /
• 2006

수문모형의 많은 입력자료 가운데 강우 관측자료가 모의결과에 가장 주요한 원인을 가진다. 과거부터 수문모형은 유역에서의 평균강우량 자료를 한 지점에서의 강우량 자료에 의존해 왔다. 그러나, 지점에서 측정된 강우량 자료를 유역을 대표하는 평균강우량 산정에 이용할 경우 부적절한 경우가 발생할 수 있으며, 특히 그 계측망이 조밀하지 못할 경우 더욱 그러하다. 레이더의 경우 보다 넓은 유역 전체를 관측하기 때문에 유역에서의 평균강우량을 제공함에 있어 좋은 관측장비라 할 수 있다. 레이더를 이용하여 강우를 관측할 경우 직접적인 강우관측이 아니기 때문에 QPE에서 몇몇 한계가 있을 수 있으나, 강우자료의 공간변화도에 대한 좋은 정보를 제공해 준다. 또한 지상의 강우관측소에서의 강우측정자료는 지점에서의 강우량에 대한 정확한 정보를 제공해 준다. 따라서, 본 연구의 목적은 지상의 강우관측소에서 관측된 강우량 자료와 레이더를 이용하여 관측된 자료, 즉 두 가지 관측자료를 Ordinary cokriging 보간을 이용하여 통합함으로써 개선된 강우량 추정방법을 개발한다.

• 한국정보통신학회논문지
• /
• 제24권9호
• /
• pp.1215-1223
• /
• 2020

최근 서울 경기를 비롯한 전국에서 국지성 집중호우, 태풍 등 악천후 관련 자연재해가 증가함에 따라 이에 대한 방재 및 물관리 대책이 필요한 실정이다. 이러한 수재해를 관측하기 위해 사용되는 우량계는 지상의 강우를 연속적·직접적으로 측정할 수 있는 장점이 있는 반면, 우량계 미설치 영역에 대한 공간적인 강우 분포를 정확하게 제공할 수 없다. 이러한 문제를 해결하고자 강수의 공간분포를 측정할 수 있는 전자파 기반 센서인 전파강수계(EWRG, Electromagnetic Wave Rain Gauge)를 개발하였다. 본 논문에서는 전파강수계의 FPGA 기반 신호처리 설계 방법을 제안한다. 전파강수계의 신호처리는 크게 LFM 파형의 ADC 및 DDC와 펄스압축, 상관 계수 및 강수 파라미터 산정으로 설계하였다. 본 연구를 통해 LFM 파형과 펄스압축 신호를 이론적으로 분석하였으며, 전파강수계 신호처리 설계를 위해서 FPGA 기반의 신호처리 설계 및 검증을 수행하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1171-1173
• /
• 2003

There are two datasets to estimate the area-mean and time-mean precipitation rate. For one, an array of surface rain gauges represents a series of rods that have to the time axis of the volume. And another data is that of a remote sensing make periodic overpasses at a fixed interval such as radar. The problem of optimally combining data from surface rain gauge data and remote sensed data is considered. In order to combining remote sensed data with Automatic Weather Station (AWS), we use optimal weighting method, which is similar to the method of [2]. They had suggested optimal weights that minimized value of the mean square error. In this paper, optimal weight is evaluated for the cases such as Changma, summer Monsoon, Typhoon and orographic rain.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.334-334
• /
• 2022

Improvement of old-fashioned rain gauge systems for automatic, timely, continuous, and accurate precipitation observation is highly essential for weather/climate prediction and natural hazards early warning, since the occurrence frequency and intensity of heavy and extreme precipitation events (especially floods) are recently getting more increase and severe worldwide due to climate change. Although rain gauge accuracy of 0.1 mm is recommended by the World Meteorological Organization (WMO), the traditional rain gauges in both weighting and tipping bucket types are often unable to meet that demand due to several existing technical limitations together with higher production and maintenance costs. Therefore, we aim to introduce a newly developed and cost-effective hybrid rain gauge system at 0.1 mm accuracy that combines advantages of weighting and tipping bucket types for continuous, automatic, and accurate precipitation observation, where the errors from long-term load cells and external environmental sources (e.g., winds) can be removed via an automatic drainage system and artificial intelligence-based data quality control procedure. Our rain gauge system consists of an instrument unit for measuring precipitation, a communication unit for transmitting and receiving measured precipitation signals, and a database unit for storing, processing, and analyzing precipitation data. This newly developed rain gauge was designed according to the weather instrument criteria, where precipitation amounts filled into the tipping bucket are measured considering the receiver's diameter, the maximum measurement of precipitation, drainage time, and the conductivity marking. Moreover, it is also designed to transmit the measured precipitation data stored in the PCB through RS232, RS485, and TCP/IP, together with connecting to the data logger to enable data collection and analysis based on user needs. Preliminary results from a comparison with an existing 1.0-mm tipping bucket rain gauge indicated that our developed rain gauge has an excellent performance in continuous precipitation observation with higher measurement accuracy, more correct precipitation days observed (120 days), and a lower error of roughly 27 mm occurred during the measurement period.

• 한국환경복원기술학회지
• /
• 제9권6호
• /
• pp.117-122
• /
• 2006

The objective of this study is to analyze the greenroof runoff quantity and delay. The experimental districts, have different soil thickness and vegetation, had installed. A measurement was conducted in Seoul University to investigate the runoff quantity and delay of the greenroof. The measurement point of runoff quality data were 8, located next to each experimental district. Also, the precipitation was measured by rain gauges(# RG2). The experimental investigation lasted from 21th July to 4th December, a total of 137 days. The results showed that the greenroof can contribute runoff retention and delay by soil, but the intensity of actual rain event affected the runoff reduction and delay. Overall, when was the rainy season, percent rainfall retention ranged 17.5% and runoff flow was delayed for 1-3 hours. But on the other hand, when was the typical rain event, percent rainfall retention ranged over 90% and runoff flow was delayed for 1-11 hours. In the result, the greenroof had the greatest runoff retention and delay, while for the typical rain event.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.153-153
• /
• 2022

Large-scale and accurate observations at fine spatial resolution through a means of remote sensing offer an effective tool for capturing rainfall variability over the traditional rain gauges and weather radars. Although satellite rainfall products (SRPs) derived using two major estimation approaches were evaluated worldwide, their practical applications suffered from limitations. In particular, the traditional top-down SRPs (e.g., IMERG), which are based on direct estimation of rain rate from microwave satellite observations, are mainly restricted with their coarse spatial resolution, while applications of the bottom-up approach, which allows backward estimation of rainfall from soil moisture signals, to novel high spatial resolution soil moisture satellite sensors over South Korea are not introduced. Thus, this study aims to evaluate the performances of a state-of-the-art bottom-up SRP (the self-calibrated SM2RAIN model) applied to the C-band SAR Sentinel-1, a statistically downscaled version of the conventional top-down IMERG SRP, and their integration for a targeted high spatial resolution of 0.01° (~ 1-km) over central South Korea, where the differences in climate zones (coastal region vs. mainland region) and vegetation covers (croplands vs. mixed forests) are highlighted. The results indicated that each single SRP can provide plus points in distinct climatic and vegetated conditions, while their drawbacks have existed. Superior performance was obtained by merging these individual SRPs, providing preliminary results on a complementary high spatial resolution SRP over central South Korea. This study results shed light on the further development of integration framework and a complementary high spatial resolution rainfall product from multi-satellite sensors as well as multi-observing systems (integrated gauge-radar-satellite) extending for entire South Korea, toward the demands for urban hydrology and microscale agriculture.

• 응용통계연구
• /
• 제13권2호
• /
• pp.525-540
• /
• 2000

본 논문에서는 측우기 관측자료와 현대 관측자료로 이루어진 서울 강수량 시계열 자료에 나타난 시간에 따른(년도별 및 계절별)변화 및 변동 특성을 파악하고자 한다. 이를 위하여 먼저 200여년 간의 강수량 시계열에 어떤 특정한 증감 추세가 있는지를 알아보는 추세분석을 실시하였다. 그리고 추세뿐만 아니라 시간에 따른 강수량의 주기성 및 변동성을 더 자세히 알기 위하여 파엽 변환(wavelet transform)을 실시하여 여러 진동 모드들의 시간에 따른 변화 양상을 분석하였다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.487-491
• /
• 2007

Recently, rainfall induced hazard has been increased gradually, for example, typhoon Rusa in 2002 and Maemi in 2003. In addition, localized heavy rainfall has been also caused tremendous damage to railroad systems. Measured data from the Meteorological Adminstration sometimes, However, are not in accordance with those of rain gauges in local area, because of its good distance. This study develop automatic alarming software to estimate and prevent these kind of rainfall induced hazards in railroad system with online transportation.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.397-404
• /
• 2000

A total of 65 rain gauges with Automatic Weather Station(AWS) were used to regional analysis of precipitation. Nine cluster regions were identified using geographical locations, maximum, mean, standard deviation of 1 day maximum rainfalls, mean annual precipitation and rainfall of rainy season in Korea. The mean annual precipitation, geographical locations, and the synoptic generating mechanisms were used to identify th five climatological homogeneous regions in Korea. Number of final regions by mean annual precipitation and cluster methods divided into five regions in Korea.

• 한국수자원학회논문집
• /
• 제53권6호
• /
• pp.417-425
• /
• 2020

홍수와 같은 수문 재해를 예측하고 예방하기 위해서는 강우량을 정확하게 추정해야한다. 본 연구에서는 전파강수계의 다중 고도 관측 데이터를 사용한 면적 평균 강우량 추정 방법을 개발하였다. 소형 전파강수시스템은 K 대역 이중 편파 기술을 사용하여 매우 짧은 거리를 관측하는 소형 레이더이다. 면적 평균 강우 추정 방법은 관측 거리와 시간이 매우 짧기 때문에 관측 범위에서 강우 변동이 작다는 가정을 기반으로 한다. 제안된 방법은 지상우량계 및 파시벨우적계와 같은 지상 장비와 비교하여 평가되었다. 비교 평가된 강우 사상들에 대해 전파강수계로부터 추정된 평균강우와 지상장비로부터 관측된 강우량이 잘 일치함을 보여준다.