• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.476-483
• /
• 2000

Like other vehicles, the suspension elements of railway rolling stock have influence on running stability and ride quality. Thus, faults detection for suspension elements is important to prevent an accidents of train and to ensure safety against derailment. This study was started to grasp the feasibility of diagnostic method for the suspension elements of bogie without disassembling. Through several tests by running test rig, we found that fault detection for suspension elements was possible. Here, we describe some results.

• Journal of the Korean Society for Railway
• /
• v.4 no.3
• /
• pp.87-93
• /
• 2001

Characteristics of the local vibration modes of an aluminium extruded panel are investigated by the finite element analysis and modal testing. Practical methods to increase the damping of the local resonances are proposed. Effects by filling urethan foam in the core cavity and by coating tar on the panel surface are compared by experiments. Modified panel structures to shift the local resonance frequency band are proposed. The results of the study are utilized to predict the severe local resonances in the aluminium extruded panels and prevent their undesirable effect on the sound insulation.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.702-706
• /
• 2009

Internal running noise of a vehicle running in open field is the summation of air borne noise and structure-borne noise. In this paper vibration damping characteristics of carbody are investigated to see the effect of sound-deadening paint on the internal running noise. By using SEA method, vibration levels of complete train with and without sound-deadening paint are estimated and structure borne noise levels are estimated.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.908-912
• /
• 2008

Structure-borne noise is known to dominate internal running noise levels in open field. In this paper vibration isolation characteristics of floors are investigated to see their effect on the internal running noise. By using the analysis and test results of test specimen of small size, internal running noise level of complete train is estimated. Analysis results show that soft rubber as a vibration isolator has the most favorable effect on the inside running noise.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.287-290
• /
• 1998

Wheel impact due to the joint discontinuity is a major source of uncomfortable vibration in the railway vehicles. Since the impact signal is measured using sensors attached to the bogie and its energy content is small compared to the other vibrations from the machineries such as motors and gear systems, the seperation of the impact signal is generally difficult. In this study a technique using an evolutionary spectrum is proposed in order to estimate the impact signal due to the rail joint discontinuity.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.114-119
• /
• 2003

Passengers are much interested in ineroir noise caused speed-up and mass reduction of railway vehicles. Generally, the major noise source for passenger cars are rolling noise and aerodynamic noise. The purpose of this paper is to evaluate the noise level and to analyze the noise sources for domestic and KTX trains. We also measured the interior noise and the rolling noise for passenger cars. In result, the noise level is below 65dBA for Seamaeul coachs, and below 66dBA for KTX coachs.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.143-150
• /
• 2000

Like conventional railways, improving running performance of vehicle in curve is more effective than improving maximum speed to reduce traveling time. But some vehicles have problems concerning running performance in cure because of insufficient study for our conventional railway characteristics. So, these problems brought about increasement of maintenance cost. This study was started to deliberate several plans to solve problems concerning running performance in curve. Some modifications of primary suspension and tests were carried out to improve curve negotiation. Here, we describe some results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.128-131
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for DC power system of railroad vehicles. The rated voltage is 1500V direct current. The main research works are focused on structure design by finite element method, rating voltage, temporary over voltage and studies of characteristics of polymeric surge arrester.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.353-360
• /
• 1998

SONICS is the software developed by authors. The program provides the noise level in outdoors due to various noise source types : construction machines including blast sources, railroad vehicles and automobiles. It operates in the Windows system. Since the software is compiled by using Visual C++ 4.0, users can un the program interactively. Also SONICS uses Windows dialog-box and choice-button so that a novice user can easily implement the program for the enviromental noise planning.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.331-336
• /
• 2005

A lot of manufacturing knowledge and method have applied to increase manufacturing efficiency in industry field. DES(Discrete Event Simulation) is one of solution to deal with manufacturing problems in factory. Beginning of research, old maintenance system of KNR ( Korea National Railroad) and its technical problems are basically investigated. KNR has maintained railway vehicle with their own solution based on experience. Very advanced railway vehicles such as KTX (Korea Train Express) and TTX(Tilting Train Express) will be difficult to maintain with their old maintenance method. In order to apply knowledge of DES, maintenance field of railway must be considered. Imaginary maintenance machine are selected to variable of DES. Maintenance capability of each machine will be evaluated base on imaginary data from imaginary machine. The machine could be very expensive as well as difficult to replace. Target of research is minimization of number of machine in railway workshop. So basic knowledge of discrete event simulation is introduced. Then five essential stages of discrete event simulation are provided. Each maintenance case defined as event. Each event is discrete and simulated base on different case such as one maintenance line with one machine and one maintenance line with two machines in railway workshop. simple maintenance method, discrete event simulation, will be come out very powerful in complicate maintenance system and will be helpful to reduce maintenance cost as well as maintenance labor.