• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1174-1187
• /
• 2007

모노레일시스템은 차량외관의 친밀성, 교량 상하부의 슬림한 구조, 저렴한 공사비, 짧은 시공기간 등 미관, 경제성, 시공성에서 다양한 장점이 인정되어 시가지 경량전철의 유력한 대안으로서 여러도시에서 검토 및 제안되고 있다. 또한, 최근에 대구시에서는 도시철도3호선의 시스템으로 모노레일을 채택하여 기본설계를 진행하고 있다. 이러한 국내의 추세에 맞추어 본 고에서는, 해외사례와 현재 수행중인 대구도시철도 기본설계를 중심으로 하여, 모노레일교량의 계획 및 설계에 관한 주요사항을 소개하였다. 먼저, 해외의 모노레일 교량 사례를 분석하였으며, 대구도시철도3호선 기본설계에서 적용하고 있는 주요설계기준을 소개하였다. 또한, 과좌형 모노레일의 대표적인 구조형식인 PSC궤도빔과 강궤도빔에 대하여 계획, 설계 및 제작 방법을 개괄적으로 설명하였다. 본 고의 내용이 모노레일 교량의 계획 및 설계에 관심이 있는 기술자들에게 도움이 되기를 기대한다.

• 한국안전학회지
• /
• 제21권5호
• /
• pp.53-59
• /
• 2006

Standard safety management costs can not be applied to each site with same rate, it is very difficult, because it depends on the experience, work method, work kind, work progress schedule, and hazard level of each construction company. Therefore, this study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. The domestic system of standard safety management costs is not considered in the foreign country, while only related subjective items have been investigated and evaluated for this study. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basial data and material to be systemized.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.46-55
• /
• 2008

Maglev is a system that a train runs levitated above a rail. Therefore it is very important to maintain a constant levitation gap for achieving serviceability and ride comfort. This study is a cooperation research subject of the 3-1 subject, performance improvement of maglev track structures, of the Center for Urban Maglev Program in Korea, started in 2006. The aim of this study is development of rapid constructions of bridge superstructure for maglev. At present, precast deck is widely used because of its superiority to cast-in-place concrete on quality and the term of works. The research group suggested basic systems of maglev guideway with PSC-U type and trapezoidal open steel box type girder, and precast deck, cooperating with Korea Railroad Research Institute, the managing institute of the 3-1 subject. In this study, longitudinally full-scale guideway girder system was fabricated and static/dynamic test of the girder was performed for the purpose of the performance evaluation.

• Steel and Composite Structures
• /
• 제31권2호
• /
• pp.133-148
• /
• 2019

This paper reports on the energy absorption characteristics of a lattice-web reinforced composite sandwich cylinder (LRCSC) which is composed of glass fiber reinforced polymer (GFRP) face sheets, GFRP lattice webs, polyurethane (PU) foam and ceramsite filler. Quasi-static compression experiments on the LRCSC manufactured by a vacuum assisted resin infusion process (VARIP) were performed to demonstrate the feasibility of the proposed cylinders. Compared with the cylinders without lattice webs, a maximum increase in the ultimate elastic load of the lattice-web reinforced cylinders of approximately 928% can be obtained. Moreover, due to the use of ceramsite filler, the energy absorption was increased by 662%. Several numerical simulations using ANSYS/LS-DYNA were conducted to parametrically investigate the effects of the number of longitudinal lattice webs, the number of transverse lattice webs, and the thickness of the transverse lattice web and GFRP face sheet. The effectiveness and feasibility of the numerical model were verified by a series of experimental results. The numerical results demonstrated that a larger number of thicker transverse lattice webs can significantly enhance the ultimate elastic load and initial stiffness. Moreover, the ultimate elastic load and initial stiffness were hardly affected by the number of longitudinal lattice webs.

• 한국강구조학회 논문집
• /
• 제9권3호통권32호
• /
• pp.363-375
• /
• 1997

절취된 세로보를 갖는 강철도교량의 바닥판에서의 피로거동 및 손상시 보수 보강의 효과를 연구하기 위해 8개 대형시험체에 대한 모형시험을 수행하였다. 실교량을 대상으로 실동응력을 측정하여 기본 응력범위 빈도히스토그램을 작성하고 이에 의한 변동응력의 등가응력범위를 산출하였다. 이 등가응력범위를 기준으로 피로시험의 응력변동범위의 크기를 조정하면서 정적 및 피로시험을 보강전과 보수 보강후로 구분하여 실시하였다. 정적시험에 의하면 재하하중의 크기가 등가실동응력 수준인 시험체의 경우에서 이미 허용응력과 비슷한 응력을 나타내므로서 피로균열의 발생조건을 충족하고 있었다. 손상된 시험체에 대해 다양한 보수 및 보강을 실시하여, 각각의 결과를 비교검토하였다. 그 결과 보수효과는 stop hole을 천공하고 고장력볼트를 체결한 경우에 피로균열성장의 지체효과가 뚜렷하게 나타났다. 한편 보강효과는 휨의 지배를 받는 세로보의 경우 인장측 플랜지의 보강이 효과적이며, 복부의 보강은 보강방법으로 적절하지 않음을 알 수 있었다. 또한 직각절취된 세로보의 피로설계등급은 우리나라 시방서 피로설계규정의 E등급에 해당한다는 것을 확인할 수 있었다.

• Steel and Composite Structures
• /
• 제36권4호
• /
• pp.481-492
• /
• 2020

To study the rail mapped deformation caused by the pier settlement of simply - supported bridges with China Railway Track System III (CRTS III) slab ballastless track (SBT) system under the mode of non-longitudinal connection ballastless track slab, this study derived an analytical solution to the mapped relationships between pier settlement and rail deformation based on the interlayer interaction mechanism of rail-pier and principle of stationary potential energy. The analytical calculation results were compared with the numerical results obtained by ANSYS finite element calculation, thus verifying the accuracy of analytical method. A parameter analysis was conducted on the key factors in rail mapped deformation such as pier settlement, fastener stiffness, and self-compacting concrete (SCC) stiffness of filling layer. The results indicate that rail deformation is approximately proportional to pier settlement. The smaller the fastener stiffness, the smoother the rail deformation curve and the longer the rail deformation area is. With the increase in the stiffness of SCC filling layer, the maximum positive deformation of rail gradually decreases, and the maximum negative deformation gradually increases. The deformation of rail caused by the pier settlement of common-span bridge structures will generate low-frequency excitation on high-speed trains.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.73-84
• /
• 2006

Standard safety management cost system was established in 1988 as a decree Number of 88-13, first time. And then, it has been revised fourteen times, up to now. A lot of practical investigations have been made for the revision but many problems at sites are continued to be put out so that it should be revised. This study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. Budget and actually performed amount of safety management costs in this study are investigated. costs for temporary work which is clarified in Japan is collected in order to compare domestic cost rate with Japanese one related to the total project amount. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basical data and material to be systemized.

• Corrosion Science and Technology
• /
• 제11권3호
• /
• pp.77-81
• /
• 2012

Cathodic protection(CP) is widely used as a means of protecting corrosion for not only marine structures like ship hulls and offshore drilling facilities, but also underground structures like buried pipelines and oil storage tanks. The principle of CP is that the anodic dissolution of metal can be protected by supplying electrons to the cathode metal. When unprotected structures are nearby to CP systems, interference problems between unprotected and protected structures may be happened. The stray current interference can accelerate the corrosion of nearby structures. So far many efforts have been made to reduce the interference in the electric railway systems adjacent to the underground metal structures like buried pipelines and gas/oil tanks. During recent few decades the protection technologies against stray current induced corrosion have been significantly improved and a number of techniques have been developed. However, there is very limited information an marine environments. Some complex harbor structures are protected by two cathodic protection systems, i.e. sacrificial anode cathodic protection(SACP) and impressed current cathodic protection(ICCP). In this case, when the protection current from sacrificial anodes returns to the cathode through electrolyte, it passes through nearby other low resistance metal structures. In many cases the stray current of ICCP systems influences the function of SACP. In this study, the risk of stray current from the SACP system to adjacent reinforced concrete structures has been verified through laboratory experiments. Concrete and steel pile structures modeled a part of bridge have been investigated in terms of CP potential and current between the two. The variation of stray current according to the magnitude of ICCP/SACP has been studied to mitigate it and to suggest the proper protection criteria.