• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.259-264
• /
• 2008

A national consultative project entitled "corrosion cost survey in China and preventive strategies" was funded by the Chinese Academy of Engineering in 1998. Soon afterwards, an expert group was organized jointly by the Institute of Metal Research, CAS and Chinese Society of Corrosion and Protection. The report on corrosion cost survey in China was published in 2003. According to this report the overall annual corrosion cost in China estimated by the Uhlig Method and Hoar Method at 1997-2001 was found to be 200.7 billion Yuan RMB and 228.8 billion Yuan RMB respectively, which is equivalent to 2% of the gross national product of China. However the total cost of corrosion including the direct and indirect cost was estimated to be more than 500 billion Yuan RMB per year in China. Among them, corrosion cost of infrastructure ranked in first comparing with other sectors. Although corrosion costs in some sectors, such as electric power, petrochemical, oil pipeline and railway in China has reduced in the past years, significant losses are still being encountered in most sectors of industries and cost-effective methods have not always been implemented. Both successful and unsuccessful cases in corrosion control and corrosion management were collected. As the investment in capital construction continues increasing rapidly in China, the maintenance and life extension of the infrastructures will become a big issue. The preventive strategies have been suggested

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1016-1019
• /
• 2009

Detailed survey of the rock mass is essential for design, construction and maintenance of rock slope. However, geological survey of poor outcrops and various geophysical aids provides limited information for slope engineering. Remote measurement system for excavation surface (Surface Mapper) and projection s/w for borehole data (Fracjection) are developed for further support of slope surveying. The Surface Mapper measures orientation of joint, fault, foliation on excavated rock surface and database the measured data. The Fracjection projects measurements in boreholes, which are obtained by BIPS, Televideo and DOM operation, to any expected excavation space. These methods promise new approaches for surveying, designing, constructing and maintaining processes of slope.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1058-1064
• /
• 2004

As one of reinforcing methods for soft roadbed, the problems that mud-pumping and settlement occurred by soft roadbed, were investigated, evaluated and analyzed through installing relatively economical and efficient geosynthetics on the selected track-bed for testing. Mock-heang to Dong-ryang on the filed resting sections in the Chung-buk lines were selected as investigating the state of track and prepared field after selecting three of 1,700 spots which often make mud-pumping and requiting maintenance for that. Long curved line radiuses(R) of Mock-heang to Dong-ryang are 500m that were installed with 4 types of geosynthetics layers and one ballast layer. Installed testing cross-section is 200m totally with 40 m between places. Strength or prepared roadbed was measured to investigate the state of roadbed and track with constructing(installing) field testing sections and physical properties of roadbed soils were evaluated and analyzed. Also, mud-pumping, settlement of elastic or plastic sleeper, failure or track, wheel-loads, transverse and earth pressures were measured after installing field testing sections.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.1 no.2
• /
• pp.59-71
• /
• 1999

Recently, many deformations in tunnel such as crack and leakage were occulted. Specially, the defects of tunnel lining have been a serious problem in safety and stability many repair works for maintenance in tunnel have been carried out. Therefore, it is necessary to estimate the structural cracking for countermeasure in deformed tunnel and to investigate on the characteristics of lining system and the soundness of tunnel. In this study model tests for tunnel lining were carried out using test apparatus and centrifuge, In the direct loading test, the prototype was Kyungbu high-speed railway tunnel and the scale is 1/10, and lining models were made of concrete. Test conditions included load conditions such as direction, shape and type, lining conditions such as single and double lining, thickness, and reinforcement. In centrifuge model test, the prototype was Seoul subway tunnel and the scale is 1/100, and lining models were made of aluminum and hydrostone. Test conditions included tunnel defects such as thickness shortage. behind cavity and longitudinal cracks, reinforcement methods such as epoxy, grouting and carbon sheet. From these model tests , the characteristics of deformation and failure for tunnel lining were estimated, and the structural behaviors of deformed lining and the effects of repair and reinforcement for tunnel lining were researched.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.964-968
• /
• 2005

The standardization of information communication is doing a Internal each other connection and each other characteristic stability operation security in objective. From the low-speed network of the subway operation beginning currently it changes with the superhigh speed digital information transmission communication service environment which is a quality service, the hazard which plans the quality improvement of the efficient communication service use which hits to here and passenger service the standardization of the technical standard which stands and the improvement which hits to an engineering standard and facility must come to accomplish. The facility which existing is been old or the enclosure communication equipments which are insufficient. it improves, establishment itexpands efficiently, like this facilities it is stabilized and it is economic and rationally use maintenance it manages with the plan for the inside and outside of the country information communication relation technical standard and engineering standard service feature improvement and future expandability and economical efficiency, the possibility of having a pliability in order to be, rational technical standard and standard it takes a triangular position, efficient characteristic security of information communication service there is a place objective which promises the rational development of course city railroad communication system with character. Function improvement of enclosure communication base equipment, against an improvement and standardization plan it described trom the prosecution which it sees.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.779-785
• /
• 2006

This paper introduces a result of internal signal modeling for a defect diagnosis of the UM-71C track circuit using on HSL. Actually, We fixed a sample area within operating section on HSL and performed the simulations for short circuit current that is reflected characteristic impedance and propagation factor. We compared the measuring data with the result of the simulation. These modeling can be used as the basic data for secure of the safety. Also, It need to make a criteria of analysis for the maintenance through comparison simulation data and inspection data.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.791-795
• /
• 2006

Urban transit is one of the most effective ways for efficient operation and construction of an urban transit by composition system which is liked originally such as rolling-stock, power, signal and infrastructure. Urban rail transit system is running in domestic, imports major equipments from advanced countries and setup for maintenance. But it takes long time because it does each organizations and lines. Also, signal, power and track system apply different standard by each construction organizations it causes an increasing construction of cost accordingly it desperately needs a systematic countermeasure. Therefore standard specification of urban transit have been establishing and operatingfor efficient operation of urban transit and base technology security that is populace ride to become a base of state economy. After track, power and signal system will be announced. Standard specification become more, the importance of administrationof standards is emphasized more. Specification administrator’s the importance which use a computing support tool recently in railroad part in embossed and is predicted to be more such forward. Therefore we propose the effective method of management with track, power signal system by constructed data-base system.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.641-646
• /
• 2009

Concrete tracks are superior to ballast tracks in the aspect of durability, maintenance and safety. However, deteriorated stiffness of railroad bed and settlement of soft ground induced by trapped or seepage water lead to problems in safety of train operation. In this research, characteristic stiffness of concrete tracks, which is determined from FRACTAL (Flexural-Rigidity Assessment of Concrete Tracks by Antisymmetric Lamb Waves) technique, was employed as an index of track displacement. The characteristic stiffness is defined using Poisson's ratio, moment of inertia and stiffness ratio of subgrade to slab. To verify validity and reliability of the proposed characteristic stiffness, experimental and theoretical researches were performed. Feasibility of the characteristic stiffness based on FRACTAL technique was proved at a real concrete track for Korean high-speed trains. Validity of the FRACTAL technique was also verified by comparing the results of impulse-response tests performed at the same measurement array and the results of SASW tests and DC resistivity survey performed at a shoulder nearby the track.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1264-1269
• /
• 2008

We designed a track circuit of Tag in-tag out type that can be used for light rails and monorails. This method is called RFID-Tag and it literally uses RFID-Tag and replaces a fixed track circuit and implements a moving block. The distance between RFID-Tags is set to the length of a train and thus a train is always in contact with one of the tags. A train runs in RFID-Tag in -RFID-Tag out type at all times and the distance between trains can be precisely controlled through the application of a moving block combined with the basic principle of a fixed block, which enables the continuous speed control and enhances the satisfaction of passengers. When constructing a track circuit using RFID-Tag the Tag in-tag out brings us the cost reduction and is more economical than the existing fixed track circuit in that sense and easy for installation and maintenance. The wireless communication between onboard and wayside makes the continuous control possible and can improve the control capacity of ATP/ATO by the implementation of a moving block on top of a fixed one.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.2051-2057
• /
• 2008

This paper is a feasibility study on the calculation of operating cost in regards to the overall operation following the completion of a number of LRT lines currently in progress. Owing to the absence of operating experience in driveless LRT system at home, the difficulties lie in the assumption of the optimal operating budget applying domestic real situation. Nevertheless, with 34 years of accumulated operating experience in heavy rail transit system, Seoul Metro, the nation's biggest urban rail transit operator, performs O&M consultancy services for several on-going projects along with every effort to acquire know-how where the appropriateness of the cost estimation as a required deliverable is reviewed and a more efficient way is provided. The main focus of this study is to seek a method to calculate the optimal amount of operating expenses as well as a cost-effective alternative for possible weaknesses from the standpoint of the operator. The body of this paper discusses the five issues such as personnel cost, overhead, maintenance cost, additional purchase price, alternative investment fee from a more macroscopic point of view, and the conclusion deals with the adequacy of the reason for selection of institutions with various operating know-how.