• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.183-189
• /
• 2003

In this paper a simulation was done to verify performance of a message transmission protocol which interfaces LDTS(Local Data Transmission System) with EIS(Electronic Interlocking System), After a stage of analyzing link specifications between LDTS and EIS, transmission messages and messaging formats, simulation parameters were extracted, applied to the error control schemes such as ARQ, FEC, HARQ, and therefrom throughputs and various performance indices were analyzed Simulation program was constructed with Matlab and Matlab GUI and then converted into a stand-alone c++ program to be used on any non-Matlab environments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1005-1009
• /
• 2005

The On Board Computer System (ORCS) used for rolling stocks is one of the core equipments in trains, which deals with collecting real-time data of a train to display and record the train's statuses, control the train, and support the driver and maintenance function. Resides, due to high reliability and high speed communication required lately for various electronics including signal1ing devices, train protection system, and multimedia, the necessity of a more robust train communication network is on the lise. This study aims at understanding the technological trend of the current train communication network in order to rapidly cope with the tendency above and providing fundamental data for designing a more advanced communication network for high-speed trains hereafter.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.185-191
• /
• 2006

Auxiliary power supply developed by domestic technology has very important function that not only effect on main power converter & inverter system, traction motor and train control system which are related to performance of train, but also influence on power supply for HVAC(Heat, Ventilation, Air-conditioning) and lighting device which are related to comfort of passengers. This paper shows characteristic test results of auxiliary power supply such as working condition and performance, which is associated with velocity of train, operating mode and surrounding equipment, through test running. Also it shows the results deduced from comparison analysis between designed data and manufactory test data as measuring in put voltage of auxiliary power supply. And, it propose a modification of design parameter for stabilizing operation and improving reliability.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.352-357
• /
• 2008

Using the artificial sun, namely the BIOSUN, we can control the sun light according to the latitude and longitude and for the seasonal changes and apply that to subway stations. By doing this, we can expect three effects, a. allowing the plants to grow inside the stations which will in turn contribute to improving air purity, controlling humidity, and reducing dust for pleasant environment, b. pleasant environment will foster positive emotional responses of the passengers and that would increase the satisfaction, and c. fostering good service for the citizenry and establishing an environmental friendly image of the Seoul Metro Subway System. The purpose of this thesis paper is to contemplate on the uses of the artificial sun powered by the microprocessor of a Light Emitting Diode (LED) in controlling the light and how the light can be utilized in facilitating photosynthesis that would allow plants to grow inside subway stations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2169-2173
• /
• 2003

The development project of Korean High Speed Train (KHST) was started in 1996. As a national research project, the KHST project aims for a development of the next generation prototype train that has a maximum speed of 350 km/h. The development process of prototype KHST including 7 vehicles was completed last year and currently the prototype train is on its way of test running over the test track with gradually increased speed. The prototype KHST uses the real time network called TCN (Train Communication Network) for exchanging information between various onboard control equipments. After 10 years of development and modification period, TCN was confirmed as international standard (IEC61375-1) for the electrical railway equipment train bus. In the prototype KHST, all major control devices are connected by TCN and exchange their information. Such devices include SCU (Supervisory Control Unit), ATC (Automatic Train Control), TCU (Traction Control Unit), and so forth. For each device that sends and receives data using TCN, a device has to find out whether TCN is in normal or failure state before its data exchange. And also a device must have a proper method of data validation that was received in a normal TCN state. This is a one of the major important factors for devices using network. Some misleading information can lead the entire system to a catastrophic condition. This paper briefly explains how TCN was implemented in the prototype KHST train, and also shows what kind of the fault diagnosis method was adopted for a fail safe operation of TCN system

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1064-1071
• /
• 2006

본 논문에서는 최대 견인력 제어를 위해서 부하토크외란관측기와 속도센서리스 벡터제어를 이용하여 점착력 계수를 추정하고 추정한 점착력 계수의 미분치를 PI 토크 제어하는 Anti-slip제어를 제안한다. 점착력 계수를 추정하기 위해서는 전압, 전류값 뿐만 아니라 자속이나 속도정보가 필요하다. 따라서 전동기의 회전속도를 정확하게 검출할 수 있는 속도센서가 필요하게 된다. 그러나 속도검출을 위해 속도센서를 부착하는 것은 여러 가지 면에서 단점을 가지고 있다. 이러한 문제점을 해결하기 위하여 속도센서 없는 센서리스 구동방식에 의한 부하토크외란관측기를 설계하여, 점착력 계수를 추정한다. 이와 같은 제어 알고리즘을 구현하기 위하여 1C1M 철도모의장치를 이용하여 제안된 알고리즘을 실험을 통하여 확인하였다.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.21-31
• /
• 2018

이 논문은 철도교 교량 바닥판의 영구거푸집 목적으로 개발된 리브가 부착된 프리캐스트 콘크리트 패널과 그 패널을 적용한 교량바닥판의 구조 성능 검증을 위한 정적하중재하실험을 수행결과를 정리하였다. 영구거푸집 용도의 리브가 부착된 프리캐스트 패널을 대상으로 폭 400mm 보부재와 폭 1200mm 판부재를 각각 3개씩 제작하였고 후타설 콘크리트와 리브가 부착된 프리캐스트 콘크리트 패널이 합성된 교량 바닥판 부재를 대상으로 폭 400mm 보부재와 폭 1200mm 판부재를 각각 3개씩 제작하여 총 12개의 실험체에 대하여 정적하중재하 실험을 수행하였다. 모든 실험체의 단면은 바닥판 설계지간 1.6m를 갖는 두께 240mm의 철도교 바닥판을 가정하여 결정하였고, 시공하중이 작용하는 프리캐스트 패널에 대하여 콘크리트 표준시방서에 따른 거푸집 설계하중을 재하하였을 때 리브가 부착된 프리캐스트 콘크리트 패널 하면의 인장응력이 콘크리트 인장강도를 초과하지 않도록 단면을 설계하였다. 각 실험체에 대하여 하중에 따른 철근변형률, 콘크리트 변형률, 균열폭, 처짐, 합성부재의 시공이음면의 슬립량을 계측하여 그 결과로부터 구조물의 안전성과 사용성 평가를 수행하였다. 모든 실험체는 현행 설계기준에서 요구되는 안전성 및 사용성 기준을 만족하는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.711-716
• /
• 2011

Ministry of Land, Transportation and Maritime Affairs of Korea has started a research project on verification process and safety assessment of Communication Based Train Control (CBTC) system for metropolitan railroad control as a 3-year project starting from 2010. As a number of companies has made efforts in securing the technologies for domestic production of CBTC systems, the purpose of the project is to develop the specification for interoperability with the considerations for local environments including metropolitan train operations and wireless communications. And the developed systems and the RAMS related outcomes from the participating companies are subject to Independent Safety Assessment (ISA) performed by a foreign specialized agency and the corresponding certificates are to be issued as a part of the project. In this paper, the RAMS management for verification and commercialization of metropolitan railroad CBTC systems has been studied. The study includes response strategy for the requirements of international standards, responsibility and authority of the related institute and the companies, quantitative RAMS objectives, and risk management strategies in project fulfillment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.330-333
• /
• 2002

Even if the train of subway starts in a certain interval from the origin according to the operation plan. as the number of passenger gets increased during operation. the boarding and getting-off time will increase, and the temporary breakdown happens to the system of train during operation, causing the delay from the operation plan. this leads to the vicious circle of train operation. making the interval of train operation irregular in downtown especially. To solve this problem, we propose the method of advanced algorithm by the actual data relating to the train operation including operation time required between stations, distance between stations. capability of train, and the dwelling time, location and distance between the preceding train and next one. The central train control system adjusts the dwelling time at each station in order to recover the delayed time, and increase the operation speed at the each station. As control algorithm is applied the dwelling time and to increase the speed, the train maintains certain interval after certain amount of time passes.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1959-1962
• /
• 2009

In this paper, we derive the hazard which is a criterion of safety assurance by PHA for the ATP equipped in Korea Tilting Train. The ATP onboard equipment in Korea Tilting Train was introduced as ETCS Level l(which is ETCS specification). Also, the ATP trackside equipment was introduced as a ETCS SRS(System Requirement Specification) 2.2.2 and it has a target for commercial operation in 2009 late. In IEC 62278(EN50126), it recommend of PHA to derive a hazard of target system in concept establishment step and estimate if it can control as a tolerable level and then derive safety case to control the hazard by lifecycle. Therefore, we indicate the hazard using criterion of safety assurance by PHA using FRS (Functional Requirement Specification) 5.0. which is a upper criterion than SRS. The hazard of ATP onboard equipment derived in Korea Tilting Train will be able to use as ATP functional hazards of unified onboard equipment in G7 which is a multiple unit and preliminary hazards of ATP onboard equipment in NEL drived by Korail.