• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1184-1187
• /
• 2002

In this paper, we propose a Rail-to-Rail OTA using equivalent MOSFETs without cutoff region, which operate in triode and saturation regions. The proposed circuit has a merit that its input range is not limited due to voltage drop of current mirrors. The simulation results of the proposed circuit are shown. From the simulation results, the linearity of the proposed circuit is improved when input voltage is from 2V to 3V.

• 문화기술의 융합
• /
• 제10권2호
• /
• pp.511-516
• /
• 2024

최근 제정된 궤도시설의 성능평가에 관한 세부지침에서 궤도성능평가의 평가절차 및 실시방법 등에 관한 필요사항을 제시하였다. 그러나 외관조사(육안조사)에 의해 레일표면손상의 등급이 결정되며, 점검자의 주관적인 판단으로 정성적인 평가에만 의존할 수밖에 없는 실정이다. 따라서 본 연구에서는 레일표면손상을 이용하여 레일내부결함까지 진단할 수 있는 진단애플리케이션을 개발하고자 하였다. 현장조사에서는 레일표면손상을 조사하고 패턴을 분석하였다. 또한 실내시험에서는 레일내부손상 이미지 데이터를 구축하기 위하여 SEM 시험을 이용하였으며, 균열 길이, 깊이 및 각도를 정량화하였다. 본 연구에서는 현장조사와 실내시험에서 구축한 이미지 데이터를 적용한 딥러닝 모델(Fast R-CNN)을 애플리케이션에 적용하였다, 스마트기기에서 사용이 가능한 딥러닝 모델을 이용한 레일표면손상 진단 애플리케이션(App)을 개발하여 향후 궤도진단 및 성능평가 업무에 활용 가능한 레일표면손상 스마트 진단시스템을 개발하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.815-816
• /
• 2007

• 비파괴검사학회지
• /
• 제31권4호
• /
• pp.398-413
• /
• 2011

철도 레일의 주기적인 탐상은 레일 결함으로 인해 발생할 수 있는 철도 중대사고를 미연에 방지할 수 있는, 철도 안전 유지의 중요한 요소 중 하나이다. 본 논문은 현재 철도 레일 탐상에 적용되고 있거나, 적용을 위해 연구 중인 비파괴탐상 기법들에 관해 기술하였다. 레일에 발생하는 결함 유형에 대해 우선 언급하였고, 레일 탐상에 가장 많이 적용되고 있는 압전형 탐촉자 기반의 초음파탐상 기술에 대해 정리하였다. 접촉식 초음파 레일 탐상 기술에 대한 대안으로서 연구 중이거나 시험 중인 비파괴탐상 기법들에 대해 기술하고, 각 기법 별로 레일의 표면 및 내부 결함 검출 가능 여부에 대해 살펴보았으며 여러 탐상 기법들에 대한 비교를 통해 향후 레일 탐상 기술 개발에 활용하고자 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.91-98
• /
• 2009

For maintaining railroad, accumulated passing tonnage is a determinant factor of appropriate rail replacement time. Recently, Seoul Metro's rail maintaining system and technology is being improved from previous years, which increasing a standard of rail replacement. Thus, this brings importance of estimating and managing for accumulated passing tonnage. In case of light weighted train such as subway, current method of calculating accumulated passing tonnage has defaults of misrepresenting accumulated passing tonnage data. Because current method is based on the weight of passengers and train., and operation data. In addition, currently there is no mechanical and electronic system that could represent and support the accurate data between heavy and non-heavy traffic area, and accumulated passing tonnage is calculated inaccurately by estimating average value each line. The current method of calculating accumulated passing tonnage misleads to unpredictable data that represent inappropriate rail replacement period, which leads to under or over analyzed replacement period. If accumulated passing tonnage is over estimated, rail replacement leads to waste of budget. Hence, it is necessary to construct reliable actual measurement system to manage rail's life safely and efficiently, and in this study the accumulated passing tonnage measurement device is installed with using rail pad of optical fiber sensors and its effect is analyzed.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.364-369
• /
• 2014

To assess the wear behavior of rails against subway rail car wheels, we investigate the sliding wear behavior of pins derived from two types of rails (normal rails and heat-treated rails) against a disc derived from a subway rail car wheel, using a pin-on-disc-type tribometer. We base the sliding wear test conditions on the sliding conditions for wheel flange-rail gauge corner contact. We demonstrate the remarkable transition in the wear behavior of the pins derived from the rails, from severe wear to mild wear, as a function of the sliding distance. The wear rate of the heat-treated rail material in the running-in wear region is much lower than that of the normal rail material. Furthermore, the wear rates of the pins in the running-in wear region decrease with increasing hardness and with decreasing sliding speed. However, there is little difference between the heat-treated rail pin and the normal rail pin in the wear rate in the steady-state wear region. Stricter controls on the decarburized layer beneath the surface of rails are required to reduce the wear rate in the running-in wear region.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.93-105
• /
• 2023

This paper examines a high-speed railway CRTS-II ballastless track-bridge system. Using the stationary potential energy theory, the mapping analytical solution between the bridge deformation and the rail vertical geometric irregularity was derived. A theoretical model (TM) considering the nonlinear stiffness of interlayer components was also proposed. By comparing with finite element model results and the measured field data, the accuracy of the TM was verified. Based on the TM, the effect of bridge deformation amplitude, girder end cantilever length, and interlayer nonlinear stiffness (fastener, cement asphalt mortar layer (CA mortar layer), extruded sheet, etc.) on the rail vertical geometric irregularity were analyzed. Results show that the rail vertical deformation extremum increases with increasing bridge deformation amplitude. The girder end cantilever length has a certain influence on the rail vertical geometric irregularity. The fastener and CA mortar layer have basically the same influence on the rail deformation amplitude. The extruded sheet and shear groove influence the rail geometric irregularity significantly, and the influence is basically the same. The influence of the shear rebar and lateral block on the rail vertical geometric irregularity could be negligible.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.130-135
• /
• 2016

It is very hard to analyze the train derailment safety quantitatively at the curved section because of the diversified affect parameters including the complex interaction between wheel and rail, the train conditions such as the shape of wheel, suspension system, the track conditions such as the radius of curve, cant, transition curve, and the operation conditions, etc. Two major factors related to the running safety of railway vehicle are classified as the railway vehicle and the track condition. In this study, when the railway vehicle passing through curves of actual track condition of subway line NO.3 in seoul ($Yeonsinnae{\leftrightarrow}Gupabal$), the effect that has influence on running safety depending on rail inclination. The analysis result of 1/40 rail inclination condition is more favorable on running safety than other rail inclination conditions because derailment coefficient and wheel unloading ratio are the lowest.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.25-32
• /
• 2010

With the latest automobile technology, though the third generation common rail system requires high injection pressures up to 1,800bar, the next generation diesel engine is expected to require more higher pressures than the third generation. The common rail pipe requires higher strength because it is one of the parts in the common rail system, which is influenced directly by fuel under high pressure. Preform design is very important for preventing head of the common rail pipe from folding in the heading process. In this study, die angle, curvature, outer diameter of die and length of trapped part are selected as main parameters to obtain best preform shape minimizing radius of folding. Therefore optimal design is carried out by finite element analysis and Taguchi method through main parameters. Results of the finite element analysis have good agreements with those of the experiments in the actual field.

• Structural Monitoring and Maintenance
• /
• 제7권1호
• /
• pp.1-12
• /
• 2020

Railway tracks are the direct supporting structures of the trains, which are vulnerable to produce large deformation under the temperature stress or subgrade settlement. The health status of track is critical, and the track should be routinely monitored to improve safety, lower the risk of excess deformation and provide reliable maintenance strategy. In this paper, the distributed optical fiber sensor was proposed to monitor the continuous deformation of the track. In order to validate the feasibility of the monitoring method, two deformation monitoring tests on one steel rail model in laboratory and on one real railway tack in outdoor were conducted respectively. In the model test, the working conditions of simply supported beam and continuous beam in the rail model under several concentrated loads were set to simulate different stress conditions of the real rail, respectively. In order to evaluate the monitoring accuracy, one distributed optical fiber sensor and one fiber Bragg grating (FBG) sensor were installed on the lower surface of the rail model, the strain measured by FBG sensor and the strain calculated from FEA were taken as measurement references. The model test results show that the strain measured by distributed optical fiber sensor has a good agreement with those measured by FBG sensor and FEA. In the outdoor test, the real track suffered from displacement and temperature loads. The distributed optical fiber sensor installed on the rail can monitor the corresponding strain and temperature with a good accuracy.