• 한국구조물진단유지관리공학회 논문집
• /
• 제12권4호
• /
• pp.71-78
• /
• 2008

철도교량의 경우, 열차하중에 의한 영향으로 교량 단부에서 상향력이 발생하였으며, 이 상향력은 체결장치에 압축력과 인장력을 유발시켰다. 현재까지 이에 대한 안전성을 검토하기 위해 체결장치를 1방향의 스프링 요소로 모사하여 구조해석을 수행해 왔다. 이러한 경우에 스프링 요소의 강성은 압축력을 재하한 실험적 연구에 의하여 산정되었다. 따라서, 상향력은 체결장치에 압축력뿐만 아니라 인장력도 유발시키기 때문에 합리적이고 정확한 구조해석을 수행하기 위해서는 인장력을 재하한 실험적 연구로부터 산정된 병진방향 강성 그리고 회전방향 강성을 함께 고려해야 한다. 본 연구에서는 6가지 실험체에 대하여 탄성과 비탄성 실험을 수행하여 레일 연직방향 병진강성과 레일 강축에 대한 회전강성을 검토하였고, 체결장치의 구조적인 거동을 분석하였다.

• 한국전산구조공학회논문집
• /
• 제16권2호
• /
• pp.141-151
• /
• 2003

철도교량은 차량과 교량의 상호작용에 의해 유발되는 동하중을 받고 있다. 이러한 동적인 효과는 교량 각 부재에 충격과 피로를 유발하고, 교량의 잔존수명에 영향을 미치게 된다 따라서 수치적 또는 시험적 방법에 의한 교량의 실제적인 동적 거동을 분석하는 것이 매우 중요하다. 본 논문에서는 KTX 차량의 주행에 따른 교량의 동적 특성을 구조적 안전성, 주행 안전성 및 승차감 측면에서 평가할 수 있는 차량/궤도/교량 상호작용 해석프로그램을 개발하였다. 차량/궤도/교량의 실질적인 모델링을 위하여 차륜/레일 접촉 모델링을 위한 헤르찌안 스프링 및 도상에 대한 윈클러 요소를 적용하였다. 또한 개발 프로그램은 준3차원해석으로 차량의 복선제도 주행에 따른 3차원 편심 효과를 고려하기 위해 비톤 자유도 및 기하학적인 관계에 따른 제약조건식을 사용하였다. 개발프로그램의 검증을 위해서 고속철도교량중 가장 일반적인 형식인 PSC 박스교(2@40m=80m)에 대해 수치해석결과 및 계측시험 결과를 비교하였다.

• Steel and Composite Structures
• /
• 제31권6호
• /
• pp.591-600
• /
• 2019

Based on the energy-variational principle, a coupling vibration analysis model of high-speed railway simply supported beam bridge-track structure system (HSRBTS) was established by considering the effect of shear deformation. The vibration differential equation and natural boundary conditions of HSRBTS were derived by considering the interlayer slip effect. Then, an analytic calculation method for the natural vibration frequency of this system was obtained. By taking two simply supported beam bridges of high-speed railway of 24 m and 32 m in span as examples, ANSYS and MIDAS finite-element numerical calculation methods were compared with the analytic method established in this paper. The calculation results show that two of them agree well with each other, validating the analytic method reported in this paper. The analytic method established in this study was used to evaluate the natural vibration characteristics of HSRBTS under different interlayer stiffness and length of rails at different subgrade sections. The results show that the vertical interlayer compressive stiffness had a great influence on the high-order natural vibration frequency of HSRBTS, and the effect of longitudinal interlayer slip stiffness on the natural vibration frequency of HSRBTS could be ignored. Under different vertical interlayer stiffness conditions, the subgrade section of HSRBTS has a critical rail length, and the critical length of rail at subgrade section decreases with the increase in vertical interlayer compressive stiffness.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.320-328
• /
• 2011

The down town passage segment which follows in the straight line which follows recently in high speed of the railway and rail construction is increasing. Also according to quality of life improvement of the citizens whom follows in national income increase the resident demand only becomes larger day by day about a environmental creation which is comfortable and house environmental etc. Demand of the citizens is not the problem of today yesterday about like this railway mean of transportation and with the fact that continuously will increase in future. This study is to predict and reduce railway noise from the conventional PSC-beam bridges which passes through urban areas under the government strateges of speed and weight increases of railway. The purpose of this study is to recommend a proper noise prediction method for designing pleasant roadside environments. The railway design including existing line reconstructions should minimize curved alignment to increase train speed to 180~200km/hr under the government's long-term planing such as the 4th Comprehensive National Development Plan (2000~2020), National Intermodal Transportation Plan (2000~2019) and National Railroad Network Establishment Plan (2006~2015), Since the PSC-beam bridges are mainly used for bridge structures urban areas, noise measurements were performed and analyzed to recommend the noise prediction methods for each type and speed of train respectively.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.21-31
• /
• 2018

이 논문은 철도교 교량 바닥판의 영구거푸집 목적으로 개발된 리브가 부착된 프리캐스트 콘크리트 패널과 그 패널을 적용한 교량바닥판의 구조 성능 검증을 위한 정적하중재하실험을 수행결과를 정리하였다. 영구거푸집 용도의 리브가 부착된 프리캐스트 패널을 대상으로 폭 400mm 보부재와 폭 1200mm 판부재를 각각 3개씩 제작하였고 후타설 콘크리트와 리브가 부착된 프리캐스트 콘크리트 패널이 합성된 교량 바닥판 부재를 대상으로 폭 400mm 보부재와 폭 1200mm 판부재를 각각 3개씩 제작하여 총 12개의 실험체에 대하여 정적하중재하 실험을 수행하였다. 모든 실험체의 단면은 바닥판 설계지간 1.6m를 갖는 두께 240mm의 철도교 바닥판을 가정하여 결정하였고, 시공하중이 작용하는 프리캐스트 패널에 대하여 콘크리트 표준시방서에 따른 거푸집 설계하중을 재하하였을 때 리브가 부착된 프리캐스트 콘크리트 패널 하면의 인장응력이 콘크리트 인장강도를 초과하지 않도록 단면을 설계하였다. 각 실험체에 대하여 하중에 따른 철근변형률, 콘크리트 변형률, 균열폭, 처짐, 합성부재의 시공이음면의 슬립량을 계측하여 그 결과로부터 구조물의 안전성과 사용성 평가를 수행하였다. 모든 실험체는 현행 설계기준에서 요구되는 안전성 및 사용성 기준을 만족하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.745-750
• /
• 2000

The rigidity of pier is important in the analysis of rail on high speed railway bridges. This study is being performed because of followings. 1) Actual longitudinal stiffness of the structure including substructure should be considered in the calculation of longitudinal stresses in rails. 2) There are many uncertainties in piers and foundations for design. 3) Actual guideline for the design of piers is necessary. 4) Measurement on the rigidity of pier according to the types of pier, foundation and soil-condition is needed. Curve for rigidity will be obtained through this study and applied for actual design as the guideline. Stresses in rails can be estimates accurately. A pair of piers, which consists of pot-bearing for fixed support and pad-bearing for movable support, is loaded by steel frame through steel wire ropes. The responses which are intended to measure in the field test are displacements, forces and tilts on the top of piers.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1691-1696
• /
• 2010

Jeong-Ji overbridge is designed to be 9.3km long, the longest for a high speed railway bridge ever constructed in Korea. This bridge is constituted of three types of structure. Standard type bridge is 35m PSC Box bridge which will be constructed by Precast Span Method. To cross the Cheonan Nonsan Expressway, 80m three-span steel arch bridge is designed to avoid rail expansion joint. Finally, Extradosed bridge is planned for high speed railway bridge for the first time in Korea based on originative and advanced design techniques. It is expected that this will contribute to the development of national technology for long-span high speed railway bridges.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1284-1292
• /
• 2015

As visual surveillance systems become more and more common in human lives, approaches based on these systems to solve security problems in practice are boosted, especially in railway applications. In this paper, we first propose a robust snag detection algorithm and then present a railway security system by using a combination of multiple sensors and the vision based snag detection algorithm. The system aims safety at several repeatedly occurred situations including slope protection, inspection of the falling-object from bridges, and the detection of snags and foreign objects on the rail. Experiments demonstrate that the snag detection is relatively robust and the system could guarantee the security of the railway through these real-time protections and detections.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.194-201
• /
• 2002

In this study is presented a numerical method which assesses running safety of the freight car loading with loom CWR and structural safety of conventional railway track and fastening when passing over sharp curves and steel girder bridges. Optimal speed of the freight car is suggested based on the numerical reviews of the safety against derailment of the freight car and structural safety of track and fastening at vulnerable points of the conventional line.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.460-469
• /
• 2006

It is widely known that the temperature variation introduces the axial force along a CWR(Continuous Welded Rail) in the railway bridges. Additional axial forces are generated due to many other reasons. These includes the interaction between the bridge girder and the CWR; acceleration or deceleration of the vehicles; support rotation (or deflection) of the girder. Among aforementioned reasons, this study investigates the influence of the support rotation on additional axial forces throughout the numerical study and the field test. Several strains gauges are installed along the CWR and the strains are measured under passing trains. It is expected that the elaborated estimation of the axial force on CWR will be beneficial for future railway maintenance.