• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.39-43
• /
• 2009

In order to develop piezoelectric inverter module for CCFL driving, Rosen-type multilayer piezoelectric transformer was fabricated. The output power and efficiency of mutilayer piezoelectric transformer according to the variation inner electrode layer were investigated. Mutilayer piezoelectric transformer was fabricated conventional mutilayer ceramic method using PZT base ceramics. Also, piezoelectric inverter module was adopted driving circuit with half-bridge type. The piezoelectric inverter module was set up with input voltage 12.5 V, switching frequency 104.3 KHz. The results showed the value of step-up ratio 100, efficiency 87% at load resistance of $100k{\Omega}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.319-320
• /
• 2006

In order to improve the ESD(Electrical Static Discharge) resistance of multilayer chip varistors, we have investigated ZnO-$Pr_6O_{11}$ based chip varistor by applying tape casting technology, whose fundamental component were ZnO : $Pr_6O_{11}$ :$Co_3O_4$: $Y_2O_3$: $Al_2O_3$=93.67: 2.53:2.53:1.25 : 0.015 (wt %). The effect of sintering condition on the multilayer chip varistors and electric properties was studied. The electrical properties and ESD resistance of multilayer chip varistor could be influenced the sintering temperature and condition.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.74-86
• /
• 1995

Antibacterial and deodorization properties of silk fabrics dyed with Sappan wood are investigated by Halo, Shake flask, Bioassay and Detection column methods.The results are obtained as follows; 1. Although K/S values increase with Al mordant and concentrate concentrations, these are decreased in 10% Al mordant concentration in case of 4mlg dye concentration. 2. Reduction ratios of bacteria increase with K/S values in various tests. 3. When undyed silk fabrics are treated with Al mordant, reduction ratios of bacteria are not varied with Al mordant concentrations. 4. Deodorization property of Al pre-mordanted dyeing silk fabrics is better than one of unmordanted dyeing and raw silk fabrics. 5. Antibacterial properties of Cu and Cr mordanted dyeing fabrics are better than ones of the dyeing fabrics treated with the other mordants. 6. Natural dyes extracted from Sappan wood show the good antibacterial and deodorization properties, and colorant among various components contained in Sappan wood has a excellent antibacterial and deodorization properties.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.665-670
• /
• 2009

Lead-free piezoelectric ($Na_{1/2}K_{1/2}$)$NbO_3$ ceramics doped with CuO and $MnO_2$ were fabricated using the conventional oxide-mixing technique. With increasing content of CuO and $MnO_2$, the dielectric constant(${\varepsilon}_{33}$) and mechanical quality factor($Q_m$) value increased, while electromechanical coupling factor($K_p$) and piezoelectric constant($d_{33}$) decreased. The piezoelectric and dielectric properties ($Na_{1/2}K_{1/2}$)$NbO_3$ ceramics doped with CuO 2.461 wt% and $MnO_2$ 0.538 wt% at sintered temperature $1050\;^{\circ}C$ were attained ${\varepsilon}_{33}$ = 403, $K_p$ = 15, $Q_m$ = 122 and $d_{33}$ = 36 pC/N. Based on response surface methodology results using design of experiment, it was concluded that ($Na_{1/2}K_{1/2}$)$NbO_3$ doped with CuO 0.477 wt% and $MnO_2$ 0.269 wt% has possibility composition of being used for piezoelectric transformer.

• Asian Journal of Turfgrass Science
• /
• v.3 no.1
• /
• pp.24-33
• /
• 1989

This study was conducted to investigate the effect of paclobutrazol [(2 RS , 3 RS )1-(4- chlor-ophenyl )-4, 4- dimethyl -2- (1, 2, 4- triazol -1- yl )- pentan -3-01] on the tolerance of hi-gh temperature and drought stress as related to growth retardation , iranspiration rate , soil water content , nitrogen level and photosynthetic rate in perennial ryegrass ( Loliurn perenne L . ' Omega H , ). Plants were given a 30 ml soil drench of paclohutrazol at the concentrations of 0, 0.01, 0.1, 1.0, 10.. 0, mg / 6 .5cm- diameter pot . The rcsults were as follows : 1. Increasing concentrations of paclohutrazul reduced plant height , leaf area , fresh weight and dry weight , hut increased chlorophyll content per unit area . The number of tillers and leaf width were not affected hy the paclobutrazol concentrations . 2. The proper concentration of paclohatrazol on growth retardation in perennial ryegrass was about I mq /pot , hut leaf deformity and severe growth retardation were shown at high concentration of 10 mq / pot . 3. Perennial ryegrasses grown at 30˚C were shown significantly short plant height and low leaf nitrogen level compared with those grown at 20˚C. Increasing concentrations of paclohutrazol at 20˚C increased nitrogen level hut it could not increase nitrogen level at 30˚C . 4. During the drought stress , increasing temperatures significantly promoted transpiration rate and wilting time . It took about 5 days at 20˚C and 3 days at 30˚C to reach wilting time of leaves from water stress treatment . Soil water contents at wilting time of non-treated controls were averaged 6. 871% at 20˚C and 6. 17% at 30˚C 5. Paclohutrazol reduced transpiration rate at high temperature and drought stress . Wilting appeared at the lower water content of soil according to increasing concentrations of paclobutrazol at 30˚C hut there were no differences among concentrations of at 20˚C. 6.Paclohutrazol treatment at 1 rag /pot reduced injury rate of leaves from 67.1 % and 100 % in control plants to 15.7% and 80% at 20˚C and 3010, respectively. 7. Photosynthetic rate per unit area was significantly reduced at high temperature . Paclohutrazol stimulated photosynthetic rate with increase of concentrations at 20˚C but there was no increasing effect at 30˚C.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.283-286
• /
• 2012

(1-X)$(Na_{0.5}K_{0.5})NbO_3-XK_{5.4}Cu_{1.3}Ta_{10}O_{29}$ (NKN-KCT) lead-free piezoelectric ceramics have been synthesized by the conventional solid state sintering method, and their sinterability and piezoelectric properties were investigated. Typically, this material is sintered between 1,025 and $1,100^{\circ}C$ for 2 hours to achieve the required densification. Crystalline structures and Microstructures were analyzed by X-ray diffraction and scanning electron microscope. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCT content and the sintering temperature. In particular, the KCT addition to NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 1.0 mol% sintered at $1,050^{\circ}C$ exhibited optimum properties (${\varepsilon}_r$=246, $d_{33}$=95, $k_p$=0.38 and $Q_m$=1,826). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• Journal of Environmental Health Sciences
• /
• v.11 no.1
• /
• pp.15-28
• /
• 1985

In order to analyze the water quality in artificial lakes in Chonnam area, a chemical and biological examination of Dongbock Lake and Changsung Lake was conducted from September to December 1983 and May 1984. A summary of the surveyed results is as follows 1. In Dongbock Lake, pH ranged from 7.2-8.1, D.O.: 8.2-12.6mg/l, B.O.D.: 4.4-22.1 mg/l, C.O.D.: 1.0-3.4rag/l, Cl$^-$: 5.9-11.9mg/l, Total-P: 0.001-0.071 mg/l, and Total -N: 0.016-0.697 mg/l, respectively. 2. In Changsung Lake, pH ranged from 7.2-8.1, D.O.: 8.1-9.8mg/l, B.O.D.: 0.9-2.9mg/l, C.O.D.: 1.9-3.4mg/l. Total- P: 0.006-0.016mg/l and Total -N:0.006-0.033mg/l, respectively. 3. The Phytoplankton identified in this investigation were distributed in a total of 46 genera and 76 spedes in Dongbock Lake 37 genera and 45 species in Changsung Lake. 4. In Dongbock Lake, it was found that the dominant algae were Melosira sp., Microcystis sp. and Synedra sp. in September Melosira sp. and Microcytis sp. in October, but Cymbella sp., Naviculla sp. and Nitzschis sp. were also observed in OctoberAsterionella sp., Melosira sp. and Microsystis sp. in November and Melosira sp., Asterionella sp sp. and Synedra sp. in December 1983. 5. In Changsung Lake, it was found that the dominant algae were Melosira sp., Lyngrbya sp. and Microcystis in September Melosira sp. and Synedra sp. in October and November and Melosira sp., Lyngbya sp. and Asterionella sp. in December 1983. The dominant algae were Melosira sp., Lyngbya sp. and Euglena sp. in May 1984. 6. It was found that the dominant algae in both Dongbock and Changsung Lakes were Microcystis sp., Melosira sp. and Asterionella sp.. Which are strongly related with water-bloom. Therefore, it could be suggested that the eutrophication phenomena is going to occur very easily in Dongbock Lake and possibly in Changsung Lake.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.476-481
• /
• 1993

Microwave dielectric properties of $(Na_{1/2}{\;}La_{1/2})TiO_3$ (NLT) ceramics which is an A site complex perovskite structure are investigated. Dense sintered bodies are obtained when calcined at $1000^{\circ}C$ for 4h and then sintered in the temperature range between $1350^{\circ}{\;}and{\;}1450^{\circ}C$. NLT shows the bulk density of $4.95g/\textrm{cm}^3$, relative density of 96.4%, and a simple cubic structure with lattice constant(a) of 3.873$\AA$. Dielectric Constant(${\varepsilon}_r$) and quality factor Q increase as bulk density and average grain size increase respectively. NLT has the dielectric ${\varepsilon}_r=125$, Q=2842(fo=3 GHz), ${\tau}_f=465{\;}ppm/^{\circ}C$ when sintered at $1400^{\circ}C$ for 4h.

• Korean Journal of Veterinary Service
• /
• v.36 no.3
• /
• pp.181-186
• /
• 2013

This study was conducted to isolate the Actinobacillus pleuropneumoniae (APP) and to find out the distribution of 15 serovars mainly in southern Gyeonggi province, Korea. From July 2011 to Nov. 2012, a total of 2,204 slaughter pigs (110 herds) were inspected for evaluation of APP like pneumonic lesions. 48 (33.8%) APP strains were isolated from the 142 lungs and identified using PCR assays (cps, apx/omlA, biovar). Consequently, the serotype ratio were as in the following; type2 41.7% (n=20), type5 33.3% (n=16), type12 10.4% (n=5), type1 6.2% (n=3), type4 and 7 2.1% (n=1) and unknown 4.2% (n=2). Also serological test was implemented for 452 (83 herds) serum samples randomly collected from above slaughter pigs using commercial ELISA kits. The positive ratio of each serotype for tested pigs were 19.1% (77/404) on [2], 7.1% (32/452) on [3, 6, 8], 6.9% (28/404) on [5a, 5b], 6.2% (28/452) on [4, 7], 2.8% (9/320) on [12], 2.0% (9/452) on [1, 9, 11] and 0.0% (0/452) on [10]. And 49.3% (223/452) of pigs were positive on apxIV antibody. On the basis of latter screening test, the infected farm ratio accounted for 71.1% (59/83) and that was much higher than previously reported data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2017

The RAR (Reinforced Abutment for Railways) is an economical abutment to reduce the settlement of a transitional zone and horizontal displacement of an abutment by constructing backfill before the abutment. In this paper, the performance of the RAR depending on the pile installation was evaluated using 2D (Dimensional) finite element analysis and compared with the existing abutment (with 5 rows pile). Numerical analysis showed that increasing pile installation is more effective in reducing horizontal displacement and earth pressure than settlement of the transitional zone. The horizontal displacement and earth pressure of the RAR was approximately 26~37% and 59~83% compared to the existing abutment by changing the pile installation. More pile installation led to a greater reduction of the horizontal displacement and earth pressure of the RAR. In addition, the horizontal earth pressure of RAR is influenced considerably by the reinforcement, pile, foundation, and stiffness of the ground.