• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.159-165
• /
• 2001

The fundamental fluid mechanics associated with the rotation of a smooth plane disk enclosed within a cylindrical chamber have been studied experimentally. In order to acquire systematic information pertinent to this problem torque and friction loss data were obtained over a wide range of disk Reynolds numbers for axial clearance-disk radius ratio H/R from 0.025 to 0.2 and radial tip gap-disk radius ratio s/R from 0.021 to 0.105. Loss analysis of hard disk drive(HDD) is presented to describe the contribution of windage loss of a rotating disk. The minimum loss from factor of HDD can be obtained from this analysis at each operation conditions.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.1
• /
• pp.39-46
• /
• 2007

The objective of this paper is to examine the detection limit, growth characteristics and notch curvature radius in short crack problem. Measurement techniques such as ultrasonic method and back-face strain compliance method were adapted. The fatigue crack growth rate of the short crack is slower than that of a long crack for a notched specimen. The short crack is detected effectively by ultrasonic method. A short surface crack occurs in the middle of specimen thickness and is transient to a through crack when maximum crack depth is larger than the notch curvature radius.

• Journal of the Korean School Mathematics Society
• /
• v.10 no.4
• /
• pp.519-533
• /
• 2007

In this paper we study a equality $\frac{1}{h_a}+\frac{1}{h_b}+\frac{1}{h_c}=\frac{1}{r}$ which contains altitudes and radius of inscribed circle of triangle. We search some paths for proving the equality, and find out 9 proof method of the equality which is related with descriptive geometry, coordinate geometry, and vector geometry.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.1
• /
• pp.1-8
• /
• 1985

The buckling characteristics of cylindrical shells with a circular hole, under axially compressed loads, have been analyzed and the results have been compared with existed experimental results. Deflection function with decay factor is assumed, and stress distribution around a circular hole in tensioned infinite plate is used for formulating buckling energy function. Applying Rayleigh Ritz procedure to this energy function, characteristic equation of eigenvalue problem is determined. Buckling load is defined by the minimum value of eigenvalues calculated according to several decay factors, and as the radius ratios of a circular hole (a/R) and shell thickness ratios (R/t) are varied, the reducing characteristics of buckling load are studied. As a result, buckling loads are reduced by about 50% according to some radius ratios ($a/R{\geq}0.15$) of circular hole and are not nearly affected by shell thickness ratio(R/t).

• Journal of the Korean Mathematical Society
• /
• v.58 no.5
• /
• pp.1147-1180
• /
• 2021

By considering the polynomial function 𝜙_car(z) = 1 + z + z²/2, we define the class 𝓢^*_car consisting of normalized analytic functions f such that zf'/f is subordinate to 𝜙_car in the unit disk. The inclusion relations and various radii constants associated with the class 𝓢^*_car and its connection with several well-known subclasses of starlike functions is established. As an application, the obtained results are applied to derive the properties of the partial sums and convolution.

• Structural Engineering and Mechanics
• /
• v.69 no.6
• /
• pp.693-698
• /
• 2019

In this study, the problem of axisymmetric deformation of prestressed $F{\ddot{o}}ppl-Hencky$ membrane under constrained deflecting was analytically solved and its closed-form solution was presented. The small-rotation-angle assumption usually adopted in membrane problems was given up, and the initial stress in membrane was taken into account. Consequently, this closed-form solution has higher calculation accuracy and can be applied for a wider range in comparison with the existing approximate solution. The presented numerical examples demonstrate the validity of the closed-form solution, and show the errors of the contact radius, profile and radial stress of membrane in the existing approximate solution brought by the small-rotation-angle assumption. Moreover, the influence of the initial stress on the contact radius is also discussed based on the numerical examples.

• Structural Engineering and Mechanics
• /
• v.59 no.2
• /
• pp.227-241
• /
• 2016

A circular plate with constant thickness, finite radius and stiff edge lying on an elastic halfspace is considered. The half-space consists of a soft functionally graded (FGM) layer with arbitrary varying elastic properties and a homogeneous elastic substrate. The plate bends under the action of arbitrary axisymmetric distributed load and response from the elastic half-space. A semi-analytical solution for the problem effective in whole range of geometric (relative layer thickness) and mechanical (elastic properties of coating and substrate, stiffness of the plate) properties is constructed using the bilateral asymptotic method (Aizikovich et al. 2009). Approximated analytical expressions for the contact stresses and deflections of the plate are provided. Numerical results showing the qualitative dependence of the solution from the initial parameters of the problem are obtained with high precision.

• Journal of applied mathematics & informatics
• /
• v.34 no.1_2
• /
• pp.85-94
• /
• 2016

In this paper, we first propose a fast one-parameter relaxation (FOPR) method with a scaled preconditioner for solving the saddle point problems, and then we present a formula for finding its optimal parameter. To evaluate the effectiveness of the proposed FOPR method with a scaled preconditioner, numerical experiments are provided by comparing its performance with the existing one or two parameter relaxation methods with optimal parameters such as the SOR-like, the GSOR and the GSSOR methods.

• Journal of the Korean Mathematical Society
• /
• v.48 no.6
• /
• pp.1203-1223
• /
• 2011

In this paper, the authors investigate the structure of operators similar to normaloid and transloid operators. In particular, we characterize the interior of the set of operators similar to normaloid (transloid, respectively) operators. This gives a concise spectral condition to determine when an operator is similar to a normaloid or transloid operator. Also it is proved that any Hilbert space operator has a compact perturbation with transloid property. This is used to give a negative answer to a problem posed by W. Y. Lee, concerning Weyl's theorem.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.11
• /
• pp.562-571
• /
• 2007

This paper considers variants of k-center problems to find the set of disks with centers on a given (or moving) line with fixed orientation such that the disks contain a given point set and the maximum radius of the disks is minimized.