• Journal of the Korean Graphic Arts Communication Society
• /
• v.11 no.1
• /
• pp.17-29
• /
• 1993

As inverstigating the influence of monomers and photoinitiator in the polymerization rate of photopolymerization by using IR spectroscopy, photopolymerizations initiated by ultraviolet radiation are characterized by the presence of an autoacceleration in the polymerization rate as the reaction proceeds. The conversion for the end of the autoacceleration varies considerably depending on the monomer and reaction condition which determines coil size and viscosity. In UV curable systems, the autoacceleration begins at only a few percent conversion and continues to 40% in HEA solution and 60% conversion in EHA solution. The polymerization ate in HEA solution increased as follow; DMHA > HCPK > DMPA and could be explained by the interaction between the initiating radical and HEA monomer and the size of the photodissociated radical of initiator. But the tendency of autoacceleration in EHA solution is almost independent on initiator.

• Macromolecular Research
• /
• v.17 no.1
• /
• pp.14-18
• /
• 2009

The acceleration effect of various organic acids, such as methanesulfonic acid (MSA), ethanesulfonic acid (ESA), 4,4'-sulfonyldibenzoic acid (SDA), diphenylacetic acid (DPAA), and $\rho$-toluenesulfonic acid (TSA), on the rate of styrene bulk polymerization with 2,2,6,6-tetramethylpiperidinyloxy (TEMPO) and benzoyl peroxide (BPO) was investigated. The addition of organic acids significantly accelerated the rate. Among these organic acids, DPAA showed an efficient rate-accelerating effect with living nature of polymerization. When DPAA was used as a rate-accelerating additive for TEMPO-mediated living free radical polymerization (LFRP), the rate of polymerization was dramatically enhanced, the linearity of reaction kinetics was successfully maintained, and the polydispersity was effectively controlled.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.13-14
• /
• 2003

Cellulosic graft copolymers were synthesized to use them as the functional materials. Three methods containing atom transfer radical polymerization (ATRP), macro-azo-initiator (MAI) method, and the polymerization catalyzed by tetrabutylammonium fluoride (TBAF) were performed in this work.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.433-438
• /
• 2012

A chemical process involves polymerization within microspheres, whereas a physical process involves the dispersion of polymer in a nonsolvent. Nano-sized monodisperse microspheres are usually prepared by chemical processes such as water-based emulsions, seed suspension polymerization, nonaqueous dispersion polymerization, and precipitation polymerizations. Polymerization was performed in a four-necked, separate-type flask equipped with a stirrer, a condenser, a nitrogen inlet, and a rubber stopper for adding the initiator with a syringe. Nitrogen was bubbled through the mixture of reagents for 1 hr. before elevating the temperature. Functional silane (3-mercaptopropyl)trimethoxysilane (MPTMS) was used for the modification of silica nanoparticles and the self-assembled monolayers obtained were characterized by X-ray photoelectron spectroscopy (XPS), laser scattering system (LSS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), elemental analysis (EA), and thermogravimetric analysis (TGA). In addition, polymer microspheres were polymerized by radical polymerization of ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) and acrylamide monomer via precipitation polymerization; then, their characteristics were investigated. From the elemental analysis results, it can be concluded that the conversion rate of acrylamide monomer was 93% and that polyacrylamide grafted to MPSN nanospheres via the radical precipitation polymerization with AAm in ethanol solvent. The microspheres were successfully polymerized by the 'graft from' method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.46-56
• /
• 2014

The aim of this reviews is to introduce the information concerning design of the UV-curable jet ink composition in order to provide a good adhesive property on non-porous surface. In order to clarify the viscosity dependence of flying speed for the UV curable jet ink, rheological analysis and observation of the flying state of the ink were carried out. The relationship between ink formulas and adhesive property on non-porous surface was investigated. It was examined the adhesive property of radical polymerization type UV curable jet ink included hydrogen abstraction type photo-initiator, it was expected that the strong adhesive strength can be obtained between the ink and non-porous surface in this study. UV curable jet ink with a slight amount of water was prepared. Optimum ratio of the cationic polymerization type UV curable jet ink shows an adequate adhesive strength towards two kinds of non-porous surface such as glass, poly(vinyl chloride) when tests were conducted on the ink jet-printing test machine.

• Journal of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.398-403
• /
• 1980

Carboxyl-terminated polybutadiene was prepared by free-radical polymerization using 4,4'-azobis-[4-cyano valeric acid] as an initiator and the effect of initiator concentration on polymer properties was investigated. Polymerization of the carboxyl-terminated polybutadiene was carried out varying the initiator concentration reacting with a constant butadiene concentration. The carboxyl weight percent decreased with increasing initiator concentration. The conversion was proportional to the square root of initiator concentration, giving a functionality greater than 2.0 which is consistent with the general tendency of free radical polymerization.

• Macromolecular Research
• /
• v.17 no.3
• /
• pp.174-180
• /
• 2009

Chemical modification of titanium/titanium oxide (Ti/$TiO_2$) substrates has recently gained a great deal of attention because of the applications of Ti/$TiO_2$-based materials to biomedical areas. The reported modification methods generally involve passive coating of Ti/$TiO_2$ substrates with protein-resistant materials, and poly(ethylene glycol) (PEG) has proven advantageous for bestowing a nonbiofouling property on the surface of Ti/$TiO_2$. However, the wider applications of Ti/$TiO_2$ based materials to biomedical areas will require the introduction of biologically active moieties onto Ti/$TiO_2$, in addition to nonbiofouling property. In this work, we therefore utilized surface-initiated polymerization to coat the Ti/$TiO_2$ substrates with polymers presenting the nonbiofouling PEG moiety and subsequently conjugated biologically active compounds to the PEG-presenting, polymeric films. Specifically, a Ti/$TiO_2$ surface was chemically modified to present an initiator for atom transfer radical polymerization, and poly(ethylene glycol) methacrylate (pEGMA) was polymerized from the surface. After activation of hydroxyl groups of poly(pEGMA) (pPEGMA) with N,N'-disuccinimidyl carbonate, biotin, a model compound, was conjugated to the pPEGMA films. The reactions were confirmed by infrared spectroscopy, X-ray photoelectron spectroscopy, contact angle goniometry, and ellipsometry. The biospecific binding of target proteins was also utilized to generate micropatterns of proteins on the Ti/$TiO_2$ surface.

• Rubber Technology
• /
• v.6 no.2
• /
• pp.85-90
• /
• 2005

• Proceedings of the Korean Fiber Society Conference
• /
• 2000.04a
• /
• pp.9-12
• /
• 2000

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1355-1358
• /
• 1999