• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.87-94
• /
• 2011

To develop the solar air heater, prototype of solar heater with test room set up on the roof of test chamber and operation characteristics were examined with solar radiation. Air induced from outside was supplied by a blower and also heated air was supplied to the test chamber(size of 1,000mm(inwidth)*2,000mm(in length)*2,000mm(in depth)) established already for performance. It was clear that almost 30% of solar radiation was converted into effective heating energy at maximum and the highest air temperature was $46^{\circ}C$, and thus solar air heater in winter could be used as an possible alternative heating system in building. Furthermore, heat energy obtained from solar air heater can be applied to regenerate absorber in the solar desiccant cooling system.

• 설비공학논문집
• /
• 제5권4호
• /
• pp.295-305
• /
• 1993

Thermal performance of test cell of model hot water Ondol house was simulated by equivalence heat resistence and heat capacity method. In this method wall was replaced by two equivalence and one heat capacity. This method enables to simulate the variation of temperature of each element of model house. The effect of pipe diameter, pitch of pipe and with or without consideration of inter-radiation between wall surfaces on the energy consumption rate were investgated. Results show that radiations between the ground surface of room and wall surfaces contribute to the heating of room air by reducing the convection heat loss through the wall surfaces.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.101-105
• /
• 2006

The computational fluid dynamic analysis has been conducted for the thermo-chemical flow field in an arcjet thruster with mono-propellant Hydrazine (N2H4) as a working fluid. The Reynolds Averaged Navier-Stokes (RANS) equations are modified to analyze compressible flows with the thermal radiation and electric field. The Maxwell equation, which is loosely coupled with the fluid dynamic equations through the Ohm heating and Lorentz forces, is adopted to analyze the electric field induced by the electric arc. The chemical reactions of Hydrazine were assumed to be infinitely fast due to the high temperature field inside the arcjet thruster. The chemical and the thermal radiation models for the nitrogen-hydrogen mixture and optically thick media respectively, were incorporated with the fluid dynamic equations. The results show that performance indices of the arcjet thruster with 1kW arc heating are improved by amount of 180% in thrust and 200% in specific impulse more than frozen flow. In addition to thermo-physical process inside the arcjet thruster is understood from the flow field results.

• Radiation Oncology Journal
• /
• 제2권1호
• /
• pp.21-23
• /
• 1984

Temperature homogeniety and stationary temperature is the most important thermometric considerations for the clinical use of hyperthermia. A thermal mapping was done in a phantom with thermocouple during hyperthermia which was induced by 1.0MHz,$0.7\~0.8watts/cm^2$ ultrasound and unfocused 2.5cm-diameter transducer. The results were as follows 1. Effective heating range$(42.5^{|circ}C\pm0.5^{\circ}C)$ were obtained 3cm in width and 4cm in depth from surface of phantom and temperature distribution was relatively uniform. 2. There was little heating effect more than 2cm away from transducer axis and more than 5cm in depth. 3. There was hot spots(more than $43^{\circ}C$) in $2.0\pm0.5cm$ depth from transducer along tranducer axis.

• 대한기계학회논문집B
• /
• 제22권7호
• /
• pp.905-914
• /
• 1998

View factor determination is very important in thermal analysis problems with surface radiation but it is very difficult to determine view factors for complex geometries. Exact calculation of view factors for crystal growth furnace is essential due to not only its high surface temperature but the radiation shield, complicated heating system. In this study, view factor calculation algorithm is introduced and applied to cylindrical crystal growth furnace. This algorithm is based on the Hemi-Cube Algorithm and the results obtained with this algorithm show good agreements with those of analytical solution. As an application of this algorithm, temperature profiles and heating value distributions for various furnaces are calculated and the shape criteria for better furnace are suggested.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1654-1659
• /
• 2017

The boundary layer of a two-dimensional forced convective flow along a persistent moving horizontal needle in an electrically conducting magnetohydrodynamic dissipative nanofluid was numerically investigated. The energy equation was constructed with Joule heating, viscous dissipation, uneven heat source/sink, and thermal radiation effects. We analyzed the boundary layer behavior of a continuously moving needle in Blasius (moving fluid) and Sakiadis (quiescent fluid) flows. We considered Cu nanoparticles embedded in methanol. The reduced system of governing Partial differential equations (PDEs) was solved by employing the Runge-Kutta-based shooting process. Computational outcomes of the rate of heat transfer and friction factors were tabulated and discussed. Velocity and temperature descriptions were examined with the assistance of graphical illustrations. Increasing the needle size did not have a significant influence on the Blasius flow. The heat transfer rate in the Sakiadis flow was high compared with that in the Blasius flow.

• 농업과학연구
• /
• 제26권1호
• /
• pp.50-57
• /
• 1999

본 시험은 L. monocytogenes KCTC 3443을 액체 배양한 후, 일반적인 열처리 및 마이크로파를 조사함으로써 가열효과에 의한 균의 불활성효과를 파악하는데 그 목적을 두었다. 2,450MHz, microwave oven을 통한 마이크로파의 온도 제어는 시료가 각각의 시험 설정 온도에 도달한 후 30분간 온도를 유지할 수 있도록 컴퓨터에 의해 제어되었으며, 온도의 편차는 ${\pm}1^{\circ}C$ 정도로 비교적 안정된 제어 효과를 보여주었다. 마이크로파 조사와 일반 가열처리 간의 균의 불활성효과를 비교한 시험에서는 55, 65, $75^{\circ}C$ 및 $85^{\circ}C$의 제어온도에서 거의 유사한 불활성도를 보여주었으며 이와같은 결과로 미루어 L. monocytogenes KCTC3443의 경우, 마이크로파 조사에 의한 비가 열 효과는 없는 것으로 보여진다. 아울러 공시균주인 L. monocytogenes KCTC3443는 $85^{\circ}C$의 30분간 가열에서도 약 $10^2{\sim}10^3cells/ml$의 균체가 생존하는 것으로 나타나 식품의 조리나 가열 후에도 2차 오염의 위험이 있는 병원성 균주로 주위가 요구된다.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.46-51
• /
• 2011

In a line heating process for hull forming, the phase of the steel transforms from austenite to martensite, bainite, ferrite, or pearlite depending on the actual speed of cooling following line heating. In order to simulate the water cooling process widely used in shipyards, a heat transfer analysis on the effects of impinging water jet, film boiling, and radiation was performed. From the above simulation it was possible to obtain the actual speed of cooling and volume percentage of each phase in the inherent strain region of a line heated steel plate. Based on the material properties calculated from the volume percentage of each phase, it should be possible to predict the plate deformations due to line heating with better precision. Compared to the line heating experimental results, the simulated water cooling process method was verified to improve the predictability of the plate deformation due to line heating.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.632-640
• /
• 1996

석탄슬러리 액적은 석유와 취급의 유사성 때문에 석유 대체에너지로서 중용하게 인식되어지고 있으며, 석유계의 연료와 비슥한 방법으로 분무연소 시키는 것이 가능하여 종래의 중유사용 연소장치를 최소한 개조하여 사용할 수 있다는 이점이 있다. 따라서 석탄슬러리 액적의 연소에 관한 연구가 활발히 진행되고 있으나 혼합되는 연료의 종류 또는 연소 및 열전달기수에 대한 해석 방법이 다양하여 아직 체계화되지 못하고 있으며 논란의 여지도 없다.

• 건축사
• /
• 통권457호
• /
• pp.78-79
• /
• 2007