• 제목/요약/키워드: radiation belt

검색결과 59건 처리시간 0.033초

MODIS 위성 영상 기반의 일차생산성 알고리즘 입력 기상 자료의 신뢰도 평가: 미국 Corn Belt 지역을 중심으로 (The Evaluation of Meteorological Inputs retrieved from MODIS for Estimation of Gross Primary Productivity in the US Corn Belt Region)

  • 이지혜;강신규;장근창;고종한;홍석영
    • 대한원격탐사학회지
    • /
    • 제27권4호
    • /
    • pp.481-494
    • /
    • 2011
  • 다양한 공간규모에 대해서 식생의 생산성을 추정하기 위해 대기와 생태계내의 탄소순환 과정을 모니터링 하는 것은 탄소순환과정과 원격탐사기법을 결합함으로써 기능하다. 그 대표적인 예로서 미국 항공우주국(NASA)에서 개발한 지구관측시스템(Earth Observing System, EOS)은 총 일차생산성 (Gross Primary Productivity, GPP), 순 일차생산성 (Net Primary Productivity, NPP)을 전 지구에 대해 1km의 공간해상도로 제공한다. 그러나 MODIS의 생산성 추정에 기상입력자료로 이용되는 The NASA Data Assimilation Office (DAO)자료는 $1{\circ}\;{\times}\;1.25{\circ}$의 거친 해상도를 가지기 때문에 지역규모에서 지표기상의 상세한 공간적인 이질성을 반영하기 어렵다. 본 연구에서는 MODIS의 Aqua와 Terra 위성의 영상만을 이용하여 생산성을 추정하기 위한 입력자료로 사용되는 일 단위 일사량(MJ $day^{-1}$), 열 최저기온($^{\circ}C$, 낮 시간 평균 대기수증기압 포차(Yapor Pressure Deficit, Pa)을 5 km 해상도로 각각 추정하였다. 각각의 입력자료의 평가를 위해 미국 중서부 Corn Belt 지역 내에 위치하고 있는 7 개소의 지상기반의 관측자료를 수집하였다. MODIS 위성영상을 이용하여 추정한 기상입력자료와 관측자료를 비교한 결과, 일 최저기온은 ME와 상관계수가 각각 0.83에서 0.98, $-0.9^{\circ}C$ 에서 $+5.2^{\circ}C$ 의 범위로 양호한 상관성을 보였다. VPD는 약간 산개하는 경향을 보인다(ME = -183.8 Pa ~ +382.1 Pa; R = 0.51 ~ 0.92). 반면에, 일 단위 일사량은 MODIS가 약간 과대평가하는 경향을 보였지만 대부분의 지역에서 관측자료와 유의한 일치도를 보였다(ME = -0.4 MJ $day^{-1}$ +7.9 MJ $day^{-1}$; R = 0 67 ~ 0.97). 본 연구에서는 맑은 날에 대해서 MODIS 위성영상으로부터 추정된 기상입력자료가 MODIS가 제공하는 기상입력자료보다 상세한 지표 기상의 이질성을 반영한 자료를 생산할 수 있음을 확인하였다.

국산원료(國産原料)를 활용(活用)한 복합분(複合粉) 및 제품개발(製品開發)에 관한 연구(硏究) - 제 3 보 복합분(複合粉)을 이용(利用)한 제면(製麵) 및 제과시험(製菓試驗) - (Development of Composite Flours and Their Products Utilizing Domestic Raw Materials - III. Noodle-making and Cookie-making Tests with Composite Flours -)

  • 김형수;안순복;이관영;이서래
    • 한국식품과학회지
    • /
    • 제5권1호
    • /
    • pp.25-32
    • /
    • 1973
  • 국산원료(國産原料)를 활용(活用)한 복합분(複合粉)으로 건면(乾麵)과 쿠키를 만들고 그들의 품질(品質)을 조사한 바 다음과 같은 결과를 얻었다. 1) 원료분(原料粉)에 $10{\sim}20%$ 탈지대두분(脫脂大豆粉)을 혼합한 복합분(複合粉)만으로 제면(製麵)할때는 면대(麵帶)가 형성되지 않았으나 품질개량제로서 1.5% GMS + 2% methocel을 첨가한 경우 면대형성(麵帶形成)과 조리시험(調理試驗)에서 가장 좋은 효과를 얻었다. 2) 원료분(原料粉)중 쌀보리가루의 제면적성(製麵適性)이 가장 우수했으며, 원료분(原料粉)에 밀가루를 25%, 50% 수준으로 혼합하면 면(麵)의 품질(品質)이 현저히 개선되었고 쌀보리 복합분(複合粉)의 경우는 식미(食味)에 있어서 밀가루면(麵)보다 양호하였다. 3) Cookie 제조시 GMS 와 CSL의 효과는 볼 수 없었고 대부분의 원료가 cookie 를 형성하였으나 쌀보리가루가 관능시험(官能試驗)에서 가장 우수하였다. 4) 복합분(複合粉)에 밀가루를 25%, 50% 첨가하여 cookie 를 만든 경우, 탈지(脫脂)쌀겨를 제외하고는 대체로 표준품(標準品) 수준으로 그 품질(品質)이 향상되었다.

  • PDF

호흡동조 방사선치료를 위한 호흡 움직임 신호 측정 (Measurement of Respiratory Motion Signals for Respiratory Gating Radiation Therapy)

  • 정진범;정원균;김연래;이정우;서태석
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2005년도 제30회 춘계학술대회
    • /
    • pp.59-63
    • /
    • 2005
  • 호흡 움직임은 종양에 대한 방사선치료의 부정확한 방사선조사가 유도되도록 복부 및 흉부에서 움직임을 야기한다. 그러므로 치료시 이러한 움직임에 대한 정확한 계산은 정상조직에는 저 선량을 조사되도록 CTV의 마진을 줄일 수 있고 방사선치료에 발생되는 부작용을 줄일 수 있다. Intrafraction motion을 고려하는 기술로는 호흡 멈춤, 호흡동조, 4차원 또는 종양추적 기술이 있다. 호흡동조 방법은 환자의 호흡 신호가 호흡주기의 일정한 범위에 위치할 때 주기적으로 빔을 조사하고 그 범위를 벗어날 때는 빔을 조사하지 않는 방법이다. 이러한 기술은 내부장기 움직임과 상관관계가 있는 호흡 움직임 신호의 획득이 요구된다. 호흡동조 방사선치료를 위한 예비연구로 본 연구자들은 호흡 움직임 신호 측정을 수행하였다. 환자의 호흡 움직임 신호 측정을 위해서, 호흡측정시스템을 3 가지 센서, 4 채널 데이터 획득 시스템, 신호처리용 컴퓨터로 구성하였다. 2명의 환자를 대상으로 본 연구자들은 호흡측정시스템을 가지고 호흡주기 및 파형을 평가하였다. 그 결과 호흡주기는 시간의 함수에 따라 일반적으로 정확한 대칭 형태는 아니지만 주기적인 형태로 측정되었다. 호흡측정 시스템은 기대했던 만큼 환자의 호흡을 잘 추적하였으며 실험에 적용하기 위해 쉽게 컨트롤 할 수 있었다.

  • PDF

과학기술위성 1호 탑재 컴퓨터(On-board Computer)에서의 SEUs(Single Event Upsets) 극복 알고리즘 (Algorithm to cope with SEUs(Single Event Upsets) on STSAT-1 OBC(On-board Computer))

  • 정성인;박홍영;이흥호
    • 대한전자공학회논문지TC
    • /
    • 제45권10호
    • /
    • pp.10-16
    • /
    • 2008
  • 보통 저궤도를 선회하는 위성은 자기장으로 연결된 반알렌대를 통과하며, 이 안에 갇혀 주기적인 운동으로 남극과 북극을 이동하는 하전입자에 의해 부품이 손상되고 수명이 단축되는 악 영향을 받고 있다. 그중 방사선에 의한 SEU (Single Event Upset) 등은 우주선에 탑재된 반도체 소자의 오동작 유발의 원인이 되고 있다. 본 연구에서는 우주환경 방사선에서 고려해야 할 점들 중에서 특히 과학기술위성 1호 탑재 컴퓨터(On-board Computer, OBC)에서의 싱글이벤트업셋(Single Event Upset, SEU)의 영향을 고찰해 보고 거기에서 극복할 수 있는 알고리즘을 제시하고 있다. SEU 누적을 방지하기 위하여 매 일정한 시간마다 전체 메모리를 읽고/쓰는 과정(memory wash)이 필요하며 워쉬 주기 선정에 대해서도 고찰했다. 이러한 실험은 과학기술위성 시리즈 및 저궤도 위성용 탑재 컴퓨터의 성능 저하를 이해하는데 도움을 줄 수 있을 뿐만 아니라, 다목적 실용위성 시리즈의 각 모듈 개발에도 적극 활용 할 수 있을 것으로 기대된다.

CLIMATE CHANGE IMPACT OVER INDIAN AGRICULTURE - A SPATIAL MODELING APPROACH

  • Priya, Satya;Shibasaki, Ryosuke
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.107-114
    • /
    • 1999
  • The large-scale distribution of crops Is usually determined by climate. We present the results of a climate-crop prediction based on spatial bio-physical process model approach, implemented in a GIS (Geographic Information System) environment using several regional and global agriculture-environmental databases. The model utilizes daily climate data like temperature, rainfall, solar radiation being generated stocastically by in-built model weather generator to determine the daily biomass and finally the crop yield. Crops are characterized by their specific growing period requirements, photosynthesis, respiration properties and harvesting index properties. Temperature and radiation during the growing period controls the development of each crop. The model simulates geographic/spatial distribution of climate by which a crop-growing belt can also be determined. The model takes both irrigated and non-irrigated area crop productivity into account and the potential increase in productivity by the technical means like mechanization is not considered. All the management input given at the base year 1995 was kept same for the next twenty-year changes until 2015. The simulated distributions of crops under current climatic conditions coincide largely with the current agricultural or specific crop growing regions. Simulation with assumed weather generated derived climate change scenario illustrate changes in the agricultural potential. There are large regional differences in the response across the country. The north-south and east-west regions responded differently with projected climate changes with increased and decreased productivity depending upon the crops and scenarios separately. When water was limiting or facilitating as non-irrigated and irrigated area crop-production effects of temperature rise and higher $CO_2$ levels were different depending on the crops and accordingly their production. Rise in temperature led to yield reduction in case of maize and rice whereas a gain was observed for wheat crop, doubled $CO_2$ concentration enhanced yield for all crops and their several combinations behaved differently with increase or decrease in yields. Finally, with this spatial modeling approach we succeeded in quantifying the crop productivity which may bring regional disparities under the different climatic scenarios where one region may become better off and the other may go worse off.

  • PDF

외상 후 발생한 횡문근육종 (Rhabdomyosarcoma Following Traumatic Injury)

  • 권대규;박성준;윤영훈;이동주
    • 대한정형외과학회지
    • /
    • 제55권3호
    • /
    • pp.271-275
    • /
    • 2020
  • 외상은 횡문근육종을 포함한 일부 육종의 발생에 영향을 미친다고 알려져 있고 수술 후 반흔이나 화상 흉터, 골절 부위, 금속 내고정물 주위에서 수년 간의 잠복기를 거쳐 육종을 일으킨 사례들이 드물게 보고되고 있다. 저자들은 컨베이어 벨트에 의해 압궤상을 입은 전완부에 11년 뒤 발생한 횡문근육종의 사례를 경험하였다. 조직 손상으로 인한 염증 반응, 많은 방사선 촬영에 대한 노출, 금속 내고정물, 감각 및 운동 마비로 인한 무의식적이고 반복적인 손상이 육종의 발생에 영향을 미쳤으리라고 생각된다. 이러한 광범위한 조직 손상 후에는 육종 발생 가능성을 염두에 두고 육종 유발 요인에 대한 노출에 주의를 기울여야 하겠다.

우주 방사능에 의한 실리콘 태양 전지의 특성 변화 (Space Radiation Effect on Si Solar Cells)

  • 이재진;곽영실;황정아;봉수찬;조경석;정성인;김경희;최한우;한영환;최용운;성백일
    • Journal of Astronomy and Space Sciences
    • /
    • 제25권4호
    • /
    • pp.435-444
    • /
    • 2008
  • 우주 방사선은 인공위성의 오동작을 유발하거나 수명을 단축하는 주된 요인 중 하나다. 반 알렌벨트라고 불리는 전하를 띤 고에너지 입자들이 지구 자기장에 포획된 공간은 이 지역에서 운용되는 인공위성뿐만 아니라, 지구 자기장을 따라 저고도까지 도달하므로 저궤도 위성들에게도 위협이 된다. 2003년 발사된 과학기술위성 1호에는 자세 제어를 위해 사용된 태양 센서가 탑재되었다. 태양 센서에는 빛을 감지하기 위한 검출기로 실리콘 태양 전지가 사용되었는데, 이 태양 전지의 합선 전류가 시간이 지남에 따라 감소하는 것이 관측되었다. 이 연구에서는 이러한 태양전지의 특성 변화가 어떠한 요인에 의해 발생하는지 지상에서의 방사능 실험을 통해 밝히고자 한다. 이를 위해 과학기술위성 1호에서 사용된 것과 동일한 태양 전지에 여러 에너지 대역의 고에너지 전자와 양성자를 조사하고 이 때 변하는 합선 전류를 측정하였다. 그리고 NOAA POES위성 데이터를 이용하여 과학기술위성 1호에 피폭되었을 방사선량을 예측하였다. 연구 결과, 과학기술위성 1호에 나타난 실리콘 태양 전지의 감쇠 현상은 700keV에서 1.5MeV의 에너지를 갖는 양성자에 의한 것으로 밝혀졌다. 이 연구 결과는 우주에서 태양 전지의 수명을 예측하기 위한 자료로 활용될 수 있다.

타이어 구조 진동음에 관한 연구 (A Study on the tire structure-borne sound)

  • 지창헌
    • 한국음향학회지
    • /
    • 제14권2호
    • /
    • pp.80-91
    • /
    • 1995
  • 타이어와 노면의 상호작용에 의해 발생하는 소음에 대한 이론적인 모델에 대하여 연구하였다. 모델은 레디얼 타이어의 벨트 운동을 얇은 셀 방정식들로 가정하고 Bohm이 유도한 운동방정식을 기초로 하였으며 이들 방정식에 요구되는 구조적인량은 타이어의 재질적인 특성을 기초로 유도하였다. 타이어의 회전형태는 이들 방정식들의 정상상태로 부터 계산되고 진통 응답은 전체 종속적인 셀 방정식에 의해 구하였다. 타이어 노면 접지면에서의 힘은 타이어 트레드의 기하학적인 형상과 접지압의 분포를 기초로 계산하였고 소음방사는 심프슨 적분에 의해 계산된다. 여러가지 설계인자의 변화에 대한 효과를 조사하여 저소음 타이어 설계의 기초자료를 확보하는데 목적이 있다.

  • PDF

Recent International Activity of KASI for Space Weather Research

  • 조경석;박영득;이재진;봉수찬;김연한;황정아;최성환
    • 천문학회보
    • /
    • 제35권1호
    • /
    • pp.32.1-32.1
    • /
    • 2010
  • KASI's Solar and Space Weather Research Group (SSWRG) is actively involved in solar and space weather research. Since its inception, the SSWRG has been utilizing ground-based assets for its research, such as the Solar Flare Telescope, Solar Imaging Spectrograph, and Sunspot Telescope. In 2007 SSWRG initiated the Korean Space Weather Prediction Center (KSWPC). The goal of KSWPC is to extend the current ground observation capabilities, construct space weather database and networking, develop prediction models, and expand space weather research. Beginning in 2010, SSWRG plans to expand its research activities by collaborating with new international partners, continuing the development of space weather prediction models and forecast system, and phasing into developing and launching space-based assets. In this talk, we will report on KASI's recent activities of international collaborations with NASA for STEREO (Solar Terrestrial Relations Observatory), SDO (Solar Dynamic Observatory), and Radiation Belt Storm Probe (RBSP).

  • PDF

원자력 발전소 작업복의 착용만족도에 관한 연구 (A Study on the Satisfaction of Working Uniform on Nuclear Power Plant)

  • 김영희;조경숙
    • 한국의류산업학회지
    • /
    • 제18권5호
    • /
    • pp.668-676
    • /
    • 2016
  • The purposes of this study were to investigate the satisfaction of working uniform in Nuclear Power Plant and to suggest the improvement of dissatisfaction. 150 workers in control area of Nuclear Power Plant were participated in survey and 30 questionnaires were asked and subjective description was allowed. 65%/35% Poly/Rayon coverall type working uniform was investigated for this survey which had been wearing usually and basically in control area in Nuclear Power Plant. According to the results, respondents were most highly dissatisfied with the wearing convenience aspect of current coverall among any other aspects, like textile and management. In wearing convenience aspects, wrist and ankle opening band system, the design, number and placement of pocket, waist belt design, the width of sleeve and pants, and ADR opening system were dissatisfied and requested for improvement. In textiles aspects, weight, protection from radiation materials, prevention from static electricity, moisture absorption, ventilation and flexibility/elasticity were dissatisfied and requested for improvement. In management aspect, washing uniform and size variation were dissatisfied and requested for improvement. Therefore, for more comfortable human interfaced working uniform, wearing convenience system as well as textile and management system must be compensated and should be newly developed for improving worker comfort, mobility, and productivity.