• Journal of Animal Science and Technology
• /
• v.56 no.7
• /
• pp.25.1-25.6
• /
• 2014

This study was carried out to investigate the association of POU1F1 (POU domain, class 1, transcription factor 1, Pit1, renamed as POU1F1) gene with backfat thickness (mm), carcass weight (kg), pH, and color values ($L^*$, $a^*$, $b^*$) in crossbred pigs (Landrace ${\times}$ Yorkshire ${\times}$ Duroc). Frequency of the AA genotype indel was at the highest level (66.67%). Frequency of A allele (0.81) was higher than that of b allele (0.19). This population followed Hardy-Weinberg equilibrium. Carcass weights and $a^*$ values of the three genotypes were all significantly different (p < 0.05), respectively. However, backfat thickness, $L^*$, $b^*$, visual color, and pH of the three genotypes were not significantly different (p > 0.05). Visual color was negatively correlated with $L^*$ (r = -0.521) and $b^*$ (r = -0.390) values, $L^*$ value was correlated with $b^*$ (r = 0.419) value, and $a^*$ value was positively correlated with $b^*$ (r = 0.612) value. These results indicate that the POU1F1 gene affected carcass weight and meat redness.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.1
• /
• pp.45-52
• /
• 2006

This study was carried out to explore the accuracy of Near Infrared Reflectance Spectroscopy (NIRS) fer the prediction of digestibility and energy value of corn silages. The spectral data were regressed against a range of digestibility and energy parameters using modified partial least squares(MPLS) multivariate analysis in conjunction with first and second order derivatization, with scatter correction procedure(SNV-Detrend) to reduce the effect of extraneous noise. Calibration models for NIRS measurements gave multivariate correlation coefficients of determination$(R^2)$ and standard errors of cross validation of 0.92(SECV 1.73), 0.91(SECV 1.13) and 0.93(SECV 1.74) for in vitro dry matter digestibility(IVDMD), in vitro true digestibility(IVTD), and cellulase dry matter digestibility(CDMD), respectively. The standard error of prediction(SEP) and the multiple correlation coefficient of validation$(R^2v)$ on the validation set(n=39) was used in comparing the prediction accuracy. The SEP value was 0.30(TDN), 0.01(NEL), and 0.01(ME). The relative ability of NIRS to predict digestibility and energy value was very good for CDMD, total digestible nutrients(TDN), net energy fer lactation(NEL) and metabolizable energy(ME). This paper shows the potential of NIRS to predict the digestibility and energy value of con silage as a routine method in feeding programmes and for giving advice to farmers.

• Korean Journal of Organic Agriculture
• /
• v.20 no.1
• /
• pp.71-80
• /
• 2012

This experiments was conducted to investigate the influence on growth of rye, triticale with legume and investigated their productivity, feed value and stock carrying capacity in order to select the appropriate forage species in the central region of Korea. In the results, Rye+Red clover showed 5.2ton/ha of dry matter yield. But there was no significant difference with Triticale+Red clover and Rye in upland field. In paddy field, Rye+Hairy vetch showed 5.2ton/ha, but there was no significant difference with Triticale+Hairy vetch and Rye. Mixture effects with Rye, Triticale and Red clover, Hairy vetch by relative yield were more than 1.00 compared to monoculture, and their mixture effect was recognized in upland and paddy field. Relative feed value was highest in the applications of Triticale mixture in upland and paddy field. The average value of $K_{CP}$ and $K_{TDN}$ showed the highest one as 2.75head/ha/yr in Rye+Red clover in upland field and 2.84head/ ha/yr in Triticale+Hairy vetch in paddy field. According to the results, Rye+Red clover in upland field and Triticale+Hairy vetch in paddy field were considered to be the most appropriate winter forage crops for the central region of Korea in terms of productivity, feed value and stock carrying capacity.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.33-42
• /
• 1999

Geometrically standardized dental radiographs were taken. We prepared Digital Cu-Equivalent Image Analyzing System for quantitative assessment of mandible bone. Images of radiographs were digitized by means of Quick scanner and personal Mcquintosh computer. NIH image as software was used for analyzing images. A stepwedge composed of 10 steps of 0.1mm copper foil in thickness was used for reference material. This study evaluated the effects of step numbers of copper wedge adopted for calculating equation. kVp and exposure time on the coefficient of determination(r²)of the equation for conversion to Cu-equivalent image and the coefficient of variation and Cu-Eq value(mm) measured at each copper step and alveolar bone of the mandible. The results were as follows: 1. The coefficients of determination(r²) of 10 conversion equations ranged from 0.9996 to 0.9973(mean=0.9988) under 70kVp and 0.16 sec. exposure. The equation showed the highest r was Y=4.75614612-0.06300524x +0.00032367x² -0.00000060x³. 2. The value of r² became lower when the equation was calculated from the copper stepwedge including 1.0mm step. In case of including 0mm step for calculation. the value of r showed variability. 3. The coefficient of variation showed 0.11, 0.20 respectively at each copper step of 0.2, 0.1mm in thickness. Those of the other steps to 0.9 mm ranged from 0.06 to 0.09 in mean value. 4. The mean Cu-Eq value of alveolar bone was 0.14±0.02mm under optimal exposure. The values were lower than the mean under the exposures over 0.20sec. in 60kVp and over 0.16sec. in 70kVp. 5. Under the exposure condition of 60kVp 0.16sec.. the coefficient of variation showed 0.03. 0.05 respectively at each copper-step of 0.3, 0.2mm in thickness. The value of r² showed over 0.9991 from both 9 and 10 steps of copper. The Cu-Eq value and the coefficient of variation was 0.14±0.01mm and 0.07 at alveolar bone respectively. In summary. A clinical application of this system seemed to be useful for assessment of quantitative assessment of alveolar provided high coefficient of determination is obtained by the modified adoption of copper step numbers and the low coefficient of variation for the range of Cu-Equivalent value of alveolar bone from optimal kVp and exposure time for each x-ray machine.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.3
• /
• pp.9-18
• /
• 1979

In this paper, we fabricated a samiconductor C. T. R.(Critical Temperature Resisthor) using vanadium-oxides as material and measured its electrical characteustics. Experimental results are as follows; (1) The abrupt resistance change coefficient of the fabricated C. T, R., , is approximately 3 and (2) the value of depends largely on the reducing time and quenching time and also (3) the C. T, R. with larger value of has shorter switching time.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.95-100
• /
• 2011

This paper proposes a new method of vehicle brake lights detection and recognition using an R-filtering. Firstly, the proposed method processes the R-filtering with the first input image and then with the second one in order to detect brake lights. Secondly, the method counts the number of red pixels and computes the mean value in each R-filtered image. The difference rates between the numbers of the red pixels and between the mean values of two images are defined in this paper. Through the analysis of the difference rates, it can recognize whether brake lights are turned on or off, and whether the vehicle ahead is being approached or not. The proposed method is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiment results show that the proposed algorithm is quite successful.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2002.05b
• /
• pp.181-198
• /
• 2002

This article describes a methodology for evaluating huge aerospace R&D investments using the real options pricing method. Option pricing has been proposed as a useful approach for modeling investment in R&D. Two important features of R&D investments are that an R&D project takes time to complete and that the outcome of R&D investments is highly uncertain. This makes the analysis of R&D investments difficult. Traditional tools for project evaluation, like IRR or the NPV, are inadequate for coping with the high uncertainty. Hence, In this article I propose a log-transformed binomal lattice method, and it will show that option pricing might be an adequate framework for evaluating such types of aerospace investments.

• Asian Journal of Innovation and Policy
• /
• v.3 no.2
• /
• pp.245-261
• /
• 2014

Knowledge, technology and information have special characteristics different from the ones of normal consumer products and services. Especially the value of such information varies according to external elements such as the provided environment, their method of utilization, and the level and purpose, etc. of the user. In this study, the indicators of information customer value are developed and measured to enhance customer-based values with efforts for making new customers and maintaining existing customers. The result is as follows: 14 customer value indicators were developed. Among the indicators, value gained versus effort, reduced time for research idea investigation and savings in time searching for equipment, and tools and materials got the highest score, which means that time-saving effects were the most important. The field study of this paper was conducted from information users in the field of national R&D, and thus future studies could be conducted in various industries in many countries to attain generalized results.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.4
• /
• pp.14-20
• /
• 2017

Refrigerant having high global warming potentials will be phased out due to environmental protection issues. R410A has been widely used in geothermal heat pump. However, it has a little high GWP by 2088 value. One of the recommended substitute for R410A refrigerant is R452B which having a GWP by 698 value. In this paper, the heating and cooling performance of the water-to-water geothermal heat pump unit with R452B was experimentally investigated. The performance of the heat pump adopting R452B was also compared with the system applying R410A. The heating and cooling capacity of R452B heat pump system showed a slightly lower values within 2% comparing with R410A system. However, the R452B system's coefficient of performance was enhanced by 5.2% and 13.7% at heating and cooling mode, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.4
• /
• pp.414-420
• /
• 2000

In this paper, evaporation heat transfer characteristics at a inner grooved tube were studied using a new natural refrigerants R-290, R-600a and HCFC refrigerant R-22. Experiments were performed in the inner tube with outside diameter of 12.70mm, having 75 fins with a fin height of 0.25mm. The following results were obtained from this research. On the evaporating heat transfer characteristics, the maximum increment of heat transfer coefficient was found in R-290. Average heat transfer coefficient was obtained the maximum value in R-290 and the minimum value in R-22. It reveals that the natural refrigerant can be used as a substitute for R-22. In the grooved inner tube, 70% of the increment of the heat transfer coefficient was obtained compared to the smooth tube. Comparing the heat transfer coefficient between experimental results and simulation data of other's, the Kandlikar's correlated equation was closely approximated to the author's experimental results in the smooth tube or grooved inner one.