• Computers and Concrete
• /
• 제5권2호
• /
• pp.117-134
• /
• 2008

An experimental and numerical research was conducted to gain a deeper insight on the structural behaviour of deep-beams with indirect supports and to assess the size effects in the ultimate state behaviour. The experimental campaign focused on the influence of the reinforcement tie distribution height on the compression check of the support region and on the benefits of using unbonded prestressing steel. Three reduced scale specimens were tested and used to validate the results obtained with a nonlinear finite element model. As a good agreement could be found between the numerical and the experimental results, the numerical model was then further used to perform simulations in large scale deep-beams, with dimensions similar to the ones to be adopted in a practical case. Two sources of size effects were identified from the simulation results. Both sources are related to the concrete quasi-brittle behaviour and are responsible for increasing failure brittleness with increasing structural size. While in the laboratory models failure occurred both in the experimental tests as well as in the numerical simulations after reinforcement yielding, the numerically analysed large scale models exhibited shear failures with reinforcement still operating in the elastic range.

• Journal of International Academy of Physical Therapy Research
• /
• 제11권3호
• /
• pp.2107-2112
• /
• 2020

Background: With the increasing elderly population, the need for gait analysis of these elderly individuals is also increasing. Most devices are costly and not portable; however, smartphones using built-in sensors capable of measuring motion and are easily available. Objectives: To examine the reliability and validity of knee joint angles of the elderly using smartphone measurements during walking. Design: Quasi-experimental research. Methods: Sixteen elderly people, aged 65+ and living in Daejeon and Chungbuk, South Korea, participated in the study. Electrogoniometers and smartphones were attached to the thigh and the side and front of the shank of each subject, respectively, using double-sided tape, an arm band, and an elastic band. Each subject completed two sets of at least seven gait cycles (14 steps). Results: Both the smartphones and electrogoniometers exhibited high agreement in terms of their primary and secondary measurements (ICC>.75). The agreement between the smartphones and electrogoniometers was also high in terms of both the primary and secondary measurements (ICC<.60). Conclusion: These results indicate that smartphones can be costly equipment cannot, even though they cannot completely replace existing clinical-grade devices. Their utility is emphasized herein for measuring knee joint angles of the elderly during walking.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.809-823
• /
• 2017

This paper describes lab test results of artificial rock-like material samples having a plane joint. Cyclic shear tests were performed under different normal loads and different shear displacement amplitudes. For this purpose, multi-stage normal loading tests (30 kN, 60 kN, 90 kN, 180 kN, 360 kN and 480 kN) with cyclic excitation at frequency of 1.0 Hz and different shear displacement amplitudes (0.5 mm, 1.0 mm, 2.0 mm, 4.0 mm, 5.0 mm, and 8.0 mm) were conducted using the big shear box device GS-1000. Experimental results show, that shear forces increase with the increase of normal forces and quasi-static friction coefficient is larger than dynamic one. With the increase of normal loads, approaching the peak value of shear forces needs larger shear displacements. During each cycle the normal displacements increase and decrease (rotational behavior in every cycle). Peak angle of inclination increases with the increase of normal load. A phase shift between maximum shear displacement and maximum shear force is observed. The corresponding time shift decreases with increasing normal load and increases with increasing shear displacement amplitudes.

• Journal of Preventive Medicine and Public Health
• /
• 제55권6호
• /
• pp.586-594
• /
• 2022

Objectives: This study investigated the effectiveness of the social marketing mix approach in increasing students' knowledge about smoking, promoting positive attitudes toward smoking cessation, and decreasing smoking behavior. Methods: This quantitative research study incorporated a quasi-experimental method with a pretest-posttest non-equivalent group design. Using the purposive sampling technique, 152 smoking students were selected as participants. They were divided into 2 equal groups, with 76 students in the control group and 76 in the intervention group. The data were collected using questionnaires and analyzed with the chi-square test, independent t-test, Wilcoxon signed-rank test, and Mann-Whitney U-test. Results: The social marketing mix intervention was effective in increasing the students' knowledge about smoking (p<0.001), improving their attitude toward smoking cessation (p<0.001), and reducing their smoking behavior (p=0.014). Conclusions: This approach should be implemented by local governments to reduce smoking behavior in the community, especially among teenagers, in addition to instituting a smoking ban and applying fines.

• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.156-161
• /
• 2015

Application of magnetic fields is important to characterize the carrier dynamics in semiconductor quantum structures. We performed photoluminescence (PL) measurements from an InGaP-AlInGaP single quantum well under pulsed magnetic fields to 50 T. The zero field interband PL transition energy matches well with the self-consistent Poisson-$Schr{\ddot{o}}dinger$ equation. We attempted to analyze the dimensionality of the quantum well by using the diamagnetic shift of the magnetoexciton. The real quantum well has finite thickness that causes the quasi-two-dimensional behavior of the exciton diamagnetic shift. The PL intensity diminishes with increasing magnetic field because of the exciton motion in the presence of magnetic field.

• Journal of Institute of Control, Robotics and Systems
• /
• 제3권2호
• /
• pp.162-168
• /
• 1997

Digital variable structure controller(DVSC) is implemented to control the temperature for the hot water heating circulating pump control system. For the DVSC, a control algorithm is suggested, which using a nonlinear sliding surface and a PID sliding surface outside and inside of steady state error boundary layer, respectively. Smith predictor algorithm is used for the compensation of long dead time. The DVSC of the suggested algorithm yields improved control performance compared with the one of existing algorithm. The system responses with the suggested DVSC shows good responses without overshoot and steady state error inspite of heating load change. By decreasing sampling time, dead time and rise time are increasing, and system output noise by flow dynamics is amplified.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.332.1-332.1
• /
• 2016

Application of magnetic fields is important to characterize the carrier dynamics in semiconductor quantum structures. We performed photoluminescence (PL) measurements from an InGaP-AlInGaP single quantum well under pulsed magnetic fields to 50 T. The zero field interband PL transition energy matches well with the self-consistent Poisson-Schr?dinger equation. We attempted to analyze the dimensionality of the quantum well by using the diamagnetic shift of the magnetoexciton. The real quantum well has finite thickness that causes the quasi-two-dimensional behavior of the exciton diamagnetic shift. The PL intensity diminishes with increasing magnetic field because of the exciton motion in the presence of magnetic field.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.122-122
• /
• 2003

In recent years, there has been increasing interest in quasi one-dimensional nanostructural systems, because of their numerous potential applications in various areas, such as materials sciences, electronics, optics, magnetism and energy storage. Specifically, zinc oxide (ZnO) is recognized as one of the most promising oxide semiconductor materials, because of its good optical, electrical, and piezoelectrical properties. The ZnO nanorods were synthesized using vapor-solid (VS) mechanism on soda lime glass substrate without the presence of metal catalyst. ZnO nanorods were prepared thermal evaporation of a Zn powder at 500. As-fabricated ZnO nanorods had an average diameter and length of 40nm and 3$\mu\textrm{m}$. Transmission electron microscopy revealed that the ZnO nanorods were single crystalline with the growth direction perpendicular to the (101) lattice plane. The influences of reaction time on the formation of the ZnO nanorods were investigated. The Photoluminescence measurements showed that the ZnO nanorods had a strong ultraviolet emission at around 380nm and a green emission at around 500nm.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.345-347
• /
• 1994

It is importent to have the switching frequency of power supplies increase in order to reduce their size and weight. But according to increasing the switching frequency, there are several defacts - that is switching losses, high voltage/current stresses and conduction losses and so on. That's why soft switching method was proposed. This paper presents the simulation and analysis of the new proposed Full bridge Zero-Voltage-Transition PWM DC-DC converter for developing that unit. This circuit doesen't increase the voltage and current stresses of main MOSFET switches. Voltage type quasi-resorent method is applied and expected high effenciency. Switching frequency is 100KHz and main switches are MOSFET.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.33-39
• /
• 2017

In this study, two types of aggregate were used for making self-compacting concrete. Standard cubic specimens were exposed to different temperatures. Seventy-two standard cylindrical specimens ($150{\times}300mm$) and Seventy-two cubic specimens (150 mm) were tested. Compressive strengths of the manufactured specimens at $23^{\circ}C$ were about 33 MPa to 40 MPa. The variable parameters among the self-compacting concrete specimens were of sand stone type. The specimens were exposed to 23, 100, 200, 400, 600, and $800^{\circ}C$ and their mechanical specifications were controlled. The heated specimens were subjected to the unconfined compression test with a quasi-static loading rate. The corresponding stress-strain curves and modulus of elasticity were compared. The results showed that, at higher temperatures, Scoria aggregate showed less sensitivity than ordinary aggregate. The concrete made with Scoria aggregate exhibited less strain. The heated self-compacting concrete had similar slopes before and after the peak. In fact, increasing heat produced gradual symmetrical stress-strain diagram span.