• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.47-53
• /
• 2018

This study compares the interrelation of fit factor(FF) and visual acuity test by the order of wearing preference between Particulate filtering face piece respirators(PFFR) and glasses for 54 participants. Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA) or Visual acuity. We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038 and compared the result of preference of wearing order between respirators and glasses. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis, peason correlation(P=0.05) Fit factor was increased when the respirator was worn before wearing the glasses(p=0.000) and decreased for visual acuity(p=0.000) The negative correlation was showed between OH and Overall fit factor(r=-0.409, p=0.002). Among 54 participants, 11 participants(20.3%) were worn respirator before wearing glasses and 1 participant(1.9%) was worn glasses before wearing respirator. The overall fit test showed the higher level was investigated for the group of participants wearing respirator before wearing glasses in 6 exercises. Also, overall fit factor were increased when participants wore glasses prior to respirator(16.6) to respirator prior to glasses(36.6). Visual acuity were increased when participants wore respirator prior to glasses(93.8) to glasses prior to respirator(106.0). Finally, comparison result of overall fit factor and visual acuity were glasses first choice from mask first choice. The results showed that higher overall fit factor was investigate when the participants wore the respirator prior to glassess at all. The results implied that it is important to maintain the overall fit factor and visual acuity according to the consideration of OH for glasses fitting when worker wore respirator and glasses at the same time.

• The Journal of the Korean dental association
• /
• v.55 no.6
• /
• pp.413-422
• /
• 2017

Purpose: The aim of this study was to confirm the validity of the $Cariview^{TM}$, test in adults by assessing correlations between $Cariview^{TM}$, scores and caries experience using a quantitative light-induced fluorescence (QLF) technique. Methods: This retrospective cross-sectional study included 111 patients aged 19-64 years who visited a dental clinic in Seoul from 2015 to 2016, and underwent the $Cariview^{TM}$, test and had their teeth photographed with the Qraycam. Plaque was scraped with sterilized cotton swabs, and then placed in a culture medium and incubated at $37^{\circ}C$ for 48 h. Finally, the degree of color change was evaluated, and scored on a 0-100 point scale. Caries experience index included not only cavitated lesions but also early caries that were detected on white and fluorescence images. Participants were divided into low, moderate and high caries risk groups according to the $Cariview^{TM}$, score, and caries experience was compared between risk groups using ANCOVA. Spearman correlation coefficients were calculated to analyze the associations between $Cariview^{TM}$, scores and caries indices. Result: The mean age of the participants was 40 years, and the mean $Cariview^{TM}$, score was $53.6{\pm}20.7$. The WDMFT and the DMFT indices significantly increased with caries risk, and this increase was significantly different between the low- and high-risk groups. The $Cariview^{TM}$, test scores were significantly correlated with the WDMFT (r = 0.28, P = 0.003) and DMFT (r = 0.29, P = 0.002) indices. Conclusion: The $Cariview^{TM}$, test could be a clinically useful and simple method for assessing caries risk in adults.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.5
• /
• pp.389-395
• /
• 2024

This study was conducted to determine the cytotoxicity of the extracts from the human body contact area of the test substance during a test on the Good Laboratory Practice (GLP), which is the medical device safety evaluation standard, using the extracorporeal shock wave therapy (ESWT) cartridge as a sample, using L-929 cells. The test and control substances were extracted with 1xMEM culture medium containing 10% FBS at 37±1℃ for 24±2 hours. The test substance extract (test group), negative control substance extract (negative control group), positive control substance extract (positive control group), and blank test solution extract (solvent control group) were applied to L929 cells and cultured for 48±2 hours in a 37±1℃, 5±1% CO2 incubator. As a result of observing cell reactions under a microscope, the cells to which the blank test solution extract and negative control substance extract were applied were grade 0, the cells to which the positive control substance extract was applied were grade 4, and the cells to which the test substance extract was applied were grade 0. As a result of quantitative evaluation through cell counting, the cell viability rate of the cells to which the negative control substance extract was applied was 106.28% compared to the blank test solution extract, the cells to which the positive control substance extract was applied were 0.00%, and the cells to which the test substance extract was applied were 99.58%. Therefore, when the results of the negative and positive control groups were confirmed, the test process was appropriate, and it was determined that it did not cause cytotoxicity because the qualitative evaluation method was less than grade 2 and the quantitative evaluation method showed a cell viability rate of more than 70%.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.3
• /
• pp.293-301
• /
• 2011

Purpose : The purposes of this study were to investigate the age-related difference in balance ability in the elderly over 65 years and to verify the clinical usefulness of the functional reach test (FRT) for balance evaluation of the elderly through the sensory organization test (SOT). Methods : The subjects were forty-six community dwelling elderly people over 65 years old in order to verify the correlation of balance measures and to compare the balance ability. Balance was measured using the FRT and the six sub-equilibrium scores and the composite equilibrium score of the SOT. Pearson's product correlation coefficient was used to evaluate the relationships among these measurements of balance. Results : There was a significant difference in functional reach by age in the elderly (p<.01). There was a significant negative correlation between the FRT and the age of the elderly (r=-.396, p<.01). There was also significant high positive correlation between the FRT and the eye closed sway surface (EC/SS) (r=.789, p<.01), and composite equilibrium score (r=.548, p<.01) of the SOT. Conclusion : Thus, it is possible to use the FRT as a quantitative measure of balance, rather than the SOT, which is more expensive and complicated to evaluate elderly people. According to the results of this study, the use of the FRT is required clinically to objectively measure the balance of elderly people in the future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.620-636
• /
• 2015

Survivability is a necessary property of network system in disturbed environment. Recovery ability is a key actor of survivability. This paper concludes network survivability into a novel composite metric, i.e. Network Recovery Degree (NRD). In order to measure this metric in quantity, a concept of Source-Destination Pair (SD Pair), is created to abstract end-to-end activity based on end nodes in network, and the quality of SD Pair is also used to describe network performance, such as connectivity, quality of service, link degree, and so on. After that, a Survivability Test method in large scale Network based on SD pairs, called STNSD, is provided. How to select SD Pairs effectively in large scale network is also provided. We set up simulation environment to validate the test method in a severe destroy scenario and evaluate the method scalability in different large scale network scenarios. Experiment and analysis shows that the metric NRD correctly reflects the effort of different survivability strategy, and the proposed test method STNSD has good scalability and can be used to test and evaluate quantitative survivability in large scale network.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.90-95
• /
• 2006

The wall of thermal vacuum chamber which is used for the satellite thermal balance test doesn't absorb satellite's IR emission perfectly and reflects some part of that. It is estimated that small thermal vacuum chamber has relatively larger wall effect than the big one. The small thermal vacuum chamber is required for the small satellite test to reduce the test cost. A quantitative analysis was carried out to investigate the chamber wall effect. As a result, temperature errors caused by chamber wall effect was calculated, and the temperature data acquired in the thermal balance test have been compensated. By defining the optimized area ratio between chamber surface and satellite surface area, the baseline to be able to determine the minimum size of thermal vacuum chamber was established to minimize the wall effect. Also, theoretical analysis about transparent material coating which can reduce the chamber wall effect is conducted.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.219-228
• /
• 2006

In urban areas, tunnelling induced ground deformations, particularly ground settlements should be considered in order to minimize the damage of adjacent structures. Therefore, an appropriate monitoring system for the tunnel construction should be setup at the planning or design stage. A number of studies on ground settlements due to tunnelling in soft ground have been carried out so far. However, most studies have focused on clay soil rather than sand soil. In particular, a few studies on behaviour of subsurface deformations in granular material have been reported. In this study, two-dimensional laboratory model test with aluminium rods regarded as continuum granular material and close range photogrammetric technique, and numerical analysis were carried out in order to identify the behaviour of subsurface deformations due to shallow tunnelling. Direction and magnitude of displacement vectors from the model test was identical to the numerical analysis. In particular, the vector direction was appeared to be toward a point below the tunnel invert level. A narrow 'chimney or tulip like' pattern of vertical displacement was confirmed by both the model test and numerical analysis. This is consistent with the field data. In addition to the qualitative comparison, the quantitative comparison of subsurface settlements according to 2D volume loss showed good agreement between the model test and numerical analysis. Therefore, close range photogrammetric technique applied in the model test may be used to validate the result from the continuum numerical analysis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.1
• /
• pp.12-17
• /
• 2006

A steam generator of nuclear power plant has thousands of thin tubes. These tubes play an important role in maintaining the pressure boundary between the primary and secondary side of nuclear power plant. The steam generator tube is easy to be damaged because of the severe operating conditions such as the high temperature and pressure. Therefore, tremendous efforts are made to assess the structural integrity of the steam generator tubes. The eddy current test is the most popular non-destructive test to assess the integrity of the tubes. However, the eddy current test has the limitation to size the flaw accurately because the eddy current signal behavior depends on the total volume of flaw. This paper shows the possibility that the ultrasonic test method can be applied to detect the flaws in the steam generator tubes and to measure them quantitatively. From the test results, it is expected that if the ultrasonic test is put to practical use in the steam generator tube inspection, the inspection results will be improved.

• The Journal of Korean Physical Therapy
• /
• v.21 no.2
• /
• pp.39-45
• /
• 2009

Purpose: The purpose of this study was to determine correlations between the Berg Balance Scale (BBS), Functional Reach Test (FRT), Timed Up & Go (TUG), Motor-Free Visual Perception Reach Test Vertical format (MVPT-V), Functional Independence Measure (FIM). Methods: The subjects used in this study were 35 stroke patients from Cheongju ST. Mary's hospital. Balance was measured by BBS, FRT. Functional mobility was measured by TUG. Visual perception was measured by MVPT-V. FIM was used to evaluate the activities of daily living. Data was analyzed using pearson product correlation. The TUG and MVPT-V index were analyzed by linear regression. Results: There was a statistically significant difference between FRT and BBS (r=0.89, p<0.01), FIM (r=0.74, p<0.05), MVPT-V (r=0.40, p<0.05), and TUG (r=-0.36, p<0.05). There was significant statistical differences between TUG and MVPT-V (r=-0.64, p<.01). However, statistically significant differences were observed between BBS and FIM (r=0.79, p<0.01). The visual close item of the MVPT-V showed the strongest variance in predicting TUG. Conclusion: The use of both quantitative and qualitive scales was shown to be a good measuring instrument for the classification of general clinical performances of stroke patients. In particular, the results suggest that the visual perception test may be able to predict functional locomotion in stroke patients.

• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.66-71
• /
• 2010

With large specific strength and outstanding corrosion resistance and erosion resistance in sea water, titanium and titanium alloy are widely used in heat exchanger production. In particular, pure titanium demonstrates outstanding molding performance and may be considered optimal for production of heat exchanger. Since titanium is very vulnerable to oxidation and embrittlement during welding, processes with less heat input are widely used, and laser welding is widely applied by considering production performance and shield etc in atmosphere. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through oxygen and nitrogen quantitative analysis and hardness measurement, and evaluated welding performance and mechanical properties of butt welding. This study evaluated field applicability of lap welding to heat exchange plate of LPG re-liquefaction device for ships through tensile stress test, hardness test and internal pressure test etc after deducing optimal weding condition and applying to actual heat exchange plate. In bead overlap area, the experiment produced sound welds with no porosity or defect by increasing and decreasing laser power, and tensile-shear test results indicated virtually the same tension and yield strength as base metal. As a result of measuring hardness at lateral cross section and bead overlap zone of actual heat exchanger welds, hardness difference within 20Hv was produced at base metal, HAZ and weldment, and as a result of pneumatic and hydraulic pressure test, no leakage occurred.