• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.27-35
• /
• 2002

In laser materials processing, localized heating, melting and evaporation caused by focused laser radiation forms a vapor on the material surface. The plume is generally an unstable entity, fluctuating according to its own dynamics. The beam is refracted and absorbed as it traverses the plume, thus modifying its power density on the surface of the condensed phases. This modifies material evaporation and optical properties of the plume. A laser-produced plasma plume simulation is completed using axisymmetric, high-temperature gas dynamic model including the laser radiation power absorption, refraction, and reflection. The physical properties and velocity profiles are verified using the published experimental and numerical results. The simulation results provide the effect of plasma plume fluctuations on the laser power density and quantitative beam radius changes on the material surface. It is proved that beam absorption, reflection and defocusing effects through the plume are essential to obtain appropriate mathematical simulation results. It is also found that absorption of the beam in the plume has much less direct effect on the beam power density at the material surface than defocusing does and helium gas is more efficient in reducing the beam refraction and absorption effect compared to argon gas for common laser materials processing.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.257-267
• /
• 2011

This paper examines the spatial and temporal variability in the shoreline boundary caused by artificial structures in Songdo Beach of South Korea. Quickbird Images of 2003, 2005, 2007, and 2010 extracted from Google Earth were used to identify changing trends of shoreline boundary. The most significant changes were observed in area where groins were extensively established, inducing the sand beach much narrower than before in almost 75% of the area($15070.72m^2$ in 2003 to $3877.46m^2$ in 2010). The Google Earth made it possible to identify area-wide patterns of shoreline change subject to many different type of artificial structures, which cannot be acquired by traditional field sampling. Groin heights, lengths and profiles can be modified during maintenance operations if the Google Earth monitoring indicates that the initial layout is not operating properly as a physical barrier to control sediment transport. It is anticipated that this research could be used as a valuable reference to confirm the outputs from past field researches for coastal processes to respond to storms in more visual and quantitative manner.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.245-247
• /
• 2002

The paper represents the effects of the drive-in process parameters on the residual stress profile of the p+ silicon film. For the quantitative determination of the residual stress profiles, the test samples are doped via the fixed boron diffusion process and four types of the thermal oxidation processes and consecutively etched by the improved process. The residual stress measurement structures with the different thickness are simultaneously fabricated on the same silicon wafer. Since the residual stress profile is not uniform along the direction normal to the surface, the residual stress is assumed to be a polynomial function of the depth. All of the coefficients of the polynomial are determined from the deflections of cantilevers and the displacement of a rotating beam structure. As the drive-in temperature or the drive-in time increases, the boron concentration decreases and the magnitude of the average residual tensile stress decreases. Also, near the surface of the p+ film the residual tensile stress is transformed into the residual compressive stress and its magnitude increases.

• Journal of the Korean earth science society
• /
• v.42 no.4
• /
• pp.401-411
• /
• 2021

This study provides comprehensive assessment results for the most recent high-resolution regional climatology in the East/Japan Sea by comparing with the various existing climatologies. This new high-resolution climatology is generated based on the Optimal Interpolation (OI) method with individual profiles from the World Ocean Database and gridded World Ocean Atlas provided by the National Centers for Environmental Information (NCEI). It was generated from the recent previous study which had a primary focus to solve the abnormal horizontal gradient problem appearing in the other high-resolution climatology version of NCEI. This study showed that this new OI field simulates well the meso-scale features including closed-curve temperature spatial distribution associated with eddy formation. Quantitative spatial variability was compared to the other four different climatologies and significant variability at 160 km was presented through a wavelet spectrum analysis. In addition, the general improvement of the new OI field except for warm bias in the coastal area was confirmed from the comparison with serial observation data provided by the National Fisheries Research and Development Institute's Korean Oceanic Data Center.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.151-162
• /
• 2019

Surface temperature has been derived from the MODIS/ASTER airborne simulator (MASTER) mid-wave infrared single channel data using the MODerate resolution atmospheric TRANsmission (MODTRAN) radiative transfer model with input data including the University of Wisconsin (UW) emissivity, the National Centers for Environmental Prediction (NCEP) atmospheric profiles, and solar and line-of-sight geometry. We have selected the study area that covers some surface types such as water, sand, agricultural (vegetated) land, and clouds. Results of the current study show the reasonable geographical distribution of surface temperature over land and water similar to the pattern of the MASTER L2 surface temperature. The thorough quantitative validation of surface temperature retrieved from this study is somehow limited due to the lack of in-situ measurements. One point comparison at the Salton Sea buoy shows that the present estimate is 1.8 K higher than the field data. Further comparison with the MASTER L2 surface temperature over the study area reveals statistically good agreement with mean differences of 4.6 K between two estimates. We further analyze the surface temperature differences between two estimates and find primary factors to be emissivity and atmospheric correction.

• Mass Spectrometry Letters
• /
• v.12 no.2
• /
• pp.47-52
• /
• 2021

Evaluating the impurity concentrations in semiconductor thin films using time of flight secondary ion mass spectrometry (ToF-SIMS) is an effective technique. The mass interference between isotopes and matrix element in data interpretation makes the process complex. In this study, we have investigated the doping concentration of phosphorus in, phosphorus doped silicon thin film on glass using ToF-SIMS in the dynamic mode of operation. To overcome the mass interference between phosphorus and silicon isotopes, the quantitative analysis of counts to concentration conversion was done following two routes, standard relative sensitivity factor (RSF) and SIMetric software estimation. Phosphorus doped silicon thin film of 180 nm was grown on glass substrate using hot wire chemical vapor deposition technique for possible applications in optoelectronic devices. Using ToF-SIMS, the phosphorus-31 isotopes were detected in the range of 10¹~10⁴ counts. The silicon isotopes matrix element was measured from p-type silicon wafer from a separate measurement to avoid mass interference. For the both procedures, the phosphorus concentration versus depth profiles were plotted which agree with a percent difference of about 3% at 100 nm depth. The concentration of phosphorus in silicon was determined in the range of 10¹⁹~10²¹ atoms/cm³. The technique will be useful for estimating distributions of various dopants in the silicon thin film grown on glass using ToF-SIMS overcoming the mass interference between isotopes.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.32.3-33
• /
• 2021

We present H I gas kinematics and star formation activities of NGC 6822, a dwarf galaxy located in the Local Volume at a distance of ~ 490 kpc. We perform profile decomposition of the line-of-sight velocity profiles of the high-resolution (42.4" × 12" spatial; 1.6 km/s spectral) H I data cube taken with the Australia Telescope Compact Array (ATCA). For this, we use a new tool, the so-called BAYGAUD (BAYesian GAUssian Decompositor) which is based on Bayesian Markov Chain Monte Carlo (MCMC) techniques, allowing us to decompose a line-of-sight velocity profile into an optimal number of Gaussian components in a quantitative manner. We classify the decomposed H I gas components of NGC 6822 into bulk-narrow, bulk-broad, and non_bulk with respect to their velocity and velocity dispersion. We correlate their gas surface densities with the surface star formation rates derived using both GALEX far-ultraviolet and WISE 22 micron data to examine the impact of gas turbulence caused by stellar feedback on the Kennicutt-Schmidt (K-S) law. The bulk-narrow component that resides within r25 is likely to follow the linear extension of the Kennicutt-Schmidt (K-S) law for molecular hydrogen (H2) at the low gas surface density regime where H I is not saturated.

• The Plant Pathology Journal
• /
• v.40 no.1
• /
• pp.83-97
• /
• 2024

Fusarium graminearum, the causal agent of Fusarium head blight (FHB) in cereal crops, employs the production of sexual fruiting bodies (perithecia) on plant debris as a strategy for overwintering and dissemination. In an artificial condition (e.g., carrot agar medium), the F. graminearum Z3643 strain was capable of producing perithecia predominantly in the central region of the fungal culture where aerial hyphae naturally collapsed. To unravel the intricate relationship between natural aerial hyphae collapse and sexual development in this fungus, we focused on 699 genes differentially expressed during aerial hyphae collapse, with 26 selected for further analysis. Targeted gene deletion and quantitative real-time PCR analyses elucidated the functions of specific genes during natural aerial hyphae collapse and perithecium formation. Furthermore, comparative gene expression analyses between natural collapse and artificial removal conditions reveal distinct temporal profiles, with the latter inducing a more rapid and pronounced response, particularly in MAT gene expression. Notably, FGSG_09210 and FGSG_09896 play crucial roles in sexual development and aerial hyphae growth, respectively. Taken together, it is plausible that if aerial hyphae collapse occurs on plant debris, it may serve as a physical cue for inducing perithecium formation in crop fields, representing a survival strategy for F. graminearum during winter. Insights into the molecular mechanisms underlying aerial hyphae collapse provides offer potential strategies for disease control against FHB caused by F. graminearum.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.3
• /
• pp.253-261
• /
• 2024

This study investigated the digital color profiles corresponding to different maturity stages and levels of brown croaker Miichthys miiuy specimens collected from the Southern Sea of South Korea. Maturity stages were determined using photomicrographs of ovarian developmental phases, which were compared with digital color values. Brown croaker specimens ranged from 24 to 81 cm in standard length; mature ovaries were predominantly observed in specimens that exceed 40 cm in length. Monthly ovary color values were primarily concentrated in the 1st and 4th quadrants, with both a^* and b^* values falling within a range of ±15 centered on the origin. Similarly, the testes color values were predominantly situated in the 4th quadrant, with a^* and b^* values ranging from -5 to 15 and 10 to 14, respectively. While the color values of the mature and spawning stages overlapped within a narrow range, distinguishing between them required both the color value and monthly color value distribution to be considered. Thus, this study underscores the efficacy of digital color measurements for assessing brown croaker gonad maturity, and provides more quantitative insights compared to subjective visual assessments by humans.

• Clinical and Experimental Reproductive Medicine
• /
• v.22 no.2
• /
• pp.191-201
• /
• 1995

Transcriptional activation of the embryonic genome initiates at 2-cell stage in mouse embryo and is characterized by the synthesis of TRC which is restricted to 2-cell stage. To investigate the roles of various protein kinases on the embryonic gene activation, the effects of protein kinase inhibitors on in vitro development and protein synthetic profiles of the early mouse embryos were examinded. None of ${\alpna}-amanitin$ which is a mRNA synthetic inhibitor, H8 which is a PKA inhibitor, and H7 which is a PKC inhibitor, affected on first cleavage of mouse 1-cell embryos in vitro. However, all of these drugs inhibited the second cleavage. When the drugs were removed following treatment for 6 hours, H8 or H7 treatment showed little inhibition on subsequent development of 1-cell embryos to 2-cell stage or further. In contrast, ${\alpna}-amanitin$ irreversibly inhibited the development of 1-cell embryos to 2-cell stage following removal of the drug. Genistein, a TPK inhibitor, inhibited both the first cleavage of 1-cell embryos and the second cleavage of 2-cell embryos, suggesting that TPK activity may be important during the early cleavages. All of the above four drugs inhibited TRC synthesis as shown by the fluorographic analysis of $[^{35}S]-Met$ labeled protein profiles. When late 1-cell embryos were treated with H7 and analyzed synthetic patterns of $[^{35}S]-Met$ labeled protein, the quantitative differences of protein synthesis on SDS-PAGE appeared on 77 kD and 33 kD region at $32{\sim}38$ hours post hCG. From these studies, transcriptional activation of embryonic genome is not essenting to the mouse 1-cell embryos to develop to 2-cell stage. Hawever, TPK activity is reguisite for both the first cleavage and second cleavage. Similarly, both PKC and PKA activities are required for the second cleavage of mouse embryos, but not for the first cleavage.