• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.129-136
• /
• 2011

Recently studies on functional concrete with a photocatalytic material such as $TiO_2$ have actively been carried out in order to remove air pollutants. The absorbtion of $TiO_2$ from those studies is applied by it being directly mixed into concrete or by suspension coated on the surface. When it comes to the effectiveness, the former process is less than that of the latter compared with the $TiO_2$ use. As a result, the direct coating of $TiO_2$ on materials' surface is more used for effectiveness. The Surface spread of it needs to have a more than $400^{\circ}C$ heat treat done to stimulate the activation and adhesion of photocatalysis. Heat treat consequently leads hydration products in concrete to be dehydrated and shrunk and is the cause of cracking. The study produces $TiO_2$ used Sol-gel method which enables it to be coated with a low temperature treat, applies it to pearlite using Lightweight Aggregate Concrete fixed with a low temperature treat and evaluates the spread performance of it. In addition to this, the size of pearlite is divided into two types: One is 2.5 mm to 5.0 mm and the other is more than 5.0 mm for the benefit of finding out the removal characteristics of $CH_3CHO$ whether they are affected by pearlite size, mixing method and ratio with $TiO_2$ and elapsed time. The result of this experiment shows that although $TiO_2$ produced by Sol-gel method is treated with 120 temperature, it maintains a high spread rate on the XRF(X ray Florescence) quantitative analysis which ranks $TiO_2$ 38 percent, $SiO_2$ 29 percent and CaO 18 percent. In the size of perlite from 2.5 mm to 5.0 mm, the removal characteristic of $CH_3CHO$ from a low temperature heated Lightweight concrete appears 20 percent higher when $TiO_2$ with Sol-gel method is spreaded on the 7 percent of surface. In other words, the removal rate is 94 percent compared with the 72 percent where $TiO_2$ is mixed in 10 percent surface. In more than 5.0 mm sized perlite, the removal rate of $CH_3CHO$, when $TiO_2$ is mixed with 10 percent, is 69 percent, which is similar with that of the previous case. It suggests that the size of pearlite has little effects on the removal rate of $CH_3CHO$. In terms of Elapsed time, the removal characteristic seems apparent at the early stage, where the average removal rate for the first 10 hours takes up 84 percent compared with that of 20 hours.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.95-103
• /
• 2010

Fomesafen is a selective herbicide, and used to control annual and perennial broad-leaf grass on soybean and fruit fields in USA and China, but not introduced in Korea yet. So, MRL (Maximum Residue Level), and analytical method of fomesafen were not establishment in Korea. Therefore, this experiment was conducted to establish a determination method for fomesafen residue in crops using HPLC-UVD/MS. Fomesafen residue was extracted with acetone from representative samples of five raw products which comprised hulled rice, soybean, apple, green pepper, and Chinese cabbage. The extract was diluted with saline water, and dichloromethane partition was followed to recover fomesafen from the aqueous phase. Florisil column chromatography was additionally employed for final clean up of the extract. The fomesafen was quantitated by HPLC with UVD, using a Shiseido CAPCELL-PAK UG C18 column. The crops were fortified with fomesafen at 3 levels per crop. Mean recovery ratio were ranged from 87.5% for a 0.4 ppm in hulled rice to 102.5% for a 0.4 ppm in apple. The coefficients of variation were ranged from 0.6% for a 2.0 ppm in hulled rice to 7.7% for a 0.04 ppm in green pepper. Quantitative limit of fomesafen was 0.04 mg/kg in representative 5 crop samples. A LC/MS with selected-ion monitoring was also provided to confirm the suspected residue. Therefore, this analytical method was reproducible and sensitive enough to determine the residue of fomesafen in agricultural commodities.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.3
• /
• pp.47-52
• /
• 1982

The contents of efficient nutrients, especially calcium(Ca), phosphorus (P), $\alpha$-amino nitrogen($\alpha-amino$ N) and total nitrogen (total N) were observed to evaluate the Sagol bone stock as a calcium and protein source: In case of quantitative changes of nutrients in the bone stock as a result of boiling for two, four, eight and twelve hours, respectively, the Ca, $\alpha$-amino N and total N contents increased in the course of boiling, and showed maximum after twelve hours. P contents also increased during eight hours but decreased after twelve hours. By four hours of reboiling, the contents of nutrients in the second stock decreased in contrast with the duration of the preceding process. The Ca and $\alpha-amino$ N contents extracted for 4 hours from the Sagol bones which were boiled for two through eight hours amounted to almost 60$\sim$90% and the total N to 130% amount of their first stocks; Ca and P contents increased when the amount of the water exceeded by weight that of the bones over seven times; and $\alpha$-amino N and total N increased when that of the water exceeded over ten times. These results suggest that Sagol bone stock could be a valuable calcium and protein source by boiling for at least twelve hours with ten times of water (wt/wt).

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.245-252
• /
• 2007

FTA (fault tree analysis), an analytical method for system failure management, was employed in the management of faults in running PCR analysis. PCR is executed through several processes, in which the process of PCR machine operation was selected for the analysis by FTA. The reason for choosing the simplest process in the PCR analysis was to adopt it as a first trial to test a feasibility of the FTA approach. First, fault events-top event, intermediate event, basic events-were identified by survey on expert knowledge of PCR. Then those events were correlated deductively to build a fault tree in hierarchical structure. The fault tree was evaluated qualitatively and quantitatively, yielding minimal cut sets, structural importance, common cause vulnerability, simulation of probability of occurrence of top event, cut set importance, item importance and sensitivity. The top event was 'errors in the step of PCR machine operation in running PCR analysis'. The major intermediate events were 'failures in instrument' and 'errors in actions in experiment'. The basic events were four events, one event and one event based on human errors, instrument failure and energy source failure, respectively. Those events were combined with Boolean logic gates-AND or OR, constructing a fault tree. In the qualitative evaluation of the tree, the basic events-'errors in preparing the reaction mixture', 'errors in setting temperature and time of PCR machine', 'failure of electrical power during running PCR machine', 'errors in selecting adequate PCR machine'-proved the most critical in the occurrence of the fault of the top event. In the quantitative evaluation, the list of the critical events were not the same as that from the qualitative evaluation. It was because the probability value of PCR machine failure, not on the list above though, increased with used time, and the probability of the events of electricity failure and defective of PCR machine were given zero due to rare likelihood of the events in general. It was concluded that this feasibility study is worth being a means to introduce the novel technique, FTA, to the management of faults in running PCR analysis.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.337-345
• /
• 1992

In this research, a kinematic wave model was applied for the runoff analysis, Regulation of streamflow was estimated by the calibration of roughness coefficient as a parameter. The data analyzed were obtained from Ananomiya and Shirasaka experimental basins at Tokyo University Forest in Aichi. Estimation methods and characteristics of roughness coefficient as a evaluation method of hydrological function of forest are summarized as follows ; 1. Roughness coefficient($N_s$) indicates the resistance of hillslope to the flowing water of surface runoff. There exists an hypothesis that resistance of hillslope to flowing water increase with the growth forest and development of the $A_o$ layer. 2. Roughness coefficient($N_s$) was estimated by the parameter when the stream direct runoff was calculated by using the kinematic wave. 3. Secular change of '$N_s$' in ananomiya has a curve which has an upper limit and increases exponentially near the limit. The curve quickly increased from 1935 to 1945 when results of afforestation for erosion control were thought to be effective. On the other hand, slight increase of '$N_s$' in Shirasaka indicates that there was not such a big change in the surface of soil layer. 4. The increase of '$N_s$' was related with decrease of direct runoff and increase of base flow. It was recognized that the rate of direct runoff decreased with the improvement of forest physiognomy and the rate of base flow was increased. But absolute value of water runoff per one storm decreased in chronological order.

• Journal of Life Science
• /
• v.24 no.2
• /
• pp.105-111
• /
• 2014

The purpose of this study was to characterize equine heat-shock protein (Hsp) genes and analyze their expression pattern in various horse tissues and blood leukocytes after exercise. In a previous study, RNA sequencing of blood and skeletal muscles of thoroughbreds before and after exercise was performed using differently expressed gene (DEG) analysis. Three Hsp genes (HspH1, Hsp90${\alpha}$ and Hsp70) were selected by DEG analysis and were found to be differentially expressed in either blood or muscle. To validate and extend previous observations on these genes, we performed RT-PCR analyses of horse tissue as well as real-time qPCR analyses of blood leukocytes after exercise. mRNA expression of these Hsp genes was found to be ubiquitous in the analyzed tissues (including thyroid, colon, skeletal muscle, cecum, kidney, spinal cord, heart, and lung). In addition, Hsp mRNA expression of these genes in extracted whole blood increased after 120 minutes of exercise compared to the baseline condition. These results are in agreement with the results of human and other experimental animals, suggesting that regulatory mechanisms that are responsible for upregulation of Hsp gene transcription may be conserved among species. Further investigations to correlate Hsp gene expression patterns with athletic performance or recovery processes after exercise are warranted.

• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.7-14
• /
• 2004

The Stearoyl-CoA Desaturase(SCD) is a key enzyme, which converting palmitic acid(16:0) and stearic acid (18:0) to pahnitoleic acid(16:1) and oleic acid(l8:1), respectively. The concentration of oleic acid(18:1) in meat of beef cattle could influence both palatability and perception of meat. This experiment has conducted to determine relationship between the compositions of monounsaturated fatty acids and the SCD mRNA level in bovine liver and loin muscle tissue. The compositions of palmitoleic acid(16:1) and oleic acid(18:1) in loin muscle were 5% and 46% of total lipid and in liver were 2% and 20% of total lipid, respectively. On the other hand, the compositions of palmitic acid(16:0) and stearic acid(18:0) in loin muscle were 25% and 45% of total lipid and in liver were 14% and 43% of total lipid, respectively. The ratio of monounsaturated to saturated fatty acids(the desaturation index) was used as a measure of SCD activity in tissues. The average desaturation index in loin muscle was higher about 3.6-fold than that in liver. The desaturation index of oleate/stearate and palmitoleatelpalmitate in loin muscle were higher 8-fold and 1.8-fold than those in liver, respectively, showing that the substrate specificity of SCD enzyme was very different between liver and muscle tissues. To determine whether the composition of monounsaturated fatty acids in liver and muscle are dependent on SCD expression, SCD mRNA level was examined by RT-PCR analysis. The SCD mRNA level in loin muscle was higher about 3-fold than that in liver. Thus, the quantitative relationship between the desaturation index of fatty acid and SCD mRNA was observed in liver and muscle. The difference in the compositions of monounsaturated fatty acids between bovine liver and muscle tissues may be due to different level of Stearoyl-CoA Desaturase mRNA.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.198-202
• /
• 2011

Rice has been the most important staple food in everyday meals of Korean people for thousands of years. Nowadays, it is getting increasingly used as flour ingredients in a variety of processed foods, so that it is consumed in more diversified ways. As a consequence, production volume of rice flour to manufacture rice cakes, noodles, breads, or confectioneries is recently getting increased in Korea. But there are not sufficient research outcomes to guarantee Korean consumers microbiological qualities of rice flour as well as rice. As a preliminary experiment, therefore, the microbiological profiles (aerobic mesophilic bacteria (AMB), spore-forming aerobic bacteria (SAB), lactic acid bacteria (LAB), yeasts and molds (YM), and Escherichia coli and coliforms) have been monitored for nine retailed white rice samples in this study. AMB counts ranged $10^2-10^6$ CFU/g for all the nine white rice samples. All the nine rice samples have SAB counts within a narrow range $(1.0{\times}10^2-2.5{\times}10^3$ CFU/g). LAB was detected in two white rice samples ($4.0{\times}10^2$ and $3.7{\times}10^3$ CFU/g), YM was detected in one white rice sample ($2.0{\times}10^2$ CFU/g) only. E. coli was not detected from all the nine samples. Coliforms were detected in one white rice sample ($4.1{\times}10$ CFU/g) only. All the rice samples were conclusively considered to have various microorganisms, though most of them are harmless and some, such as coliforms, may be harmful.

• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.1-14
• /
• 1980

Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.232-237
• /
• 1994

Field microplot(D 20cm, 1 85cm) experiment filled with Bonryang sandy loam soil(Typic Udifluvents) was conducted to obtain quantitative information on the movement of applied nitrogen under different soil moisture regimes and ladino clover cultivation. Urea applied to the soil was quickly transformed into $NH_4$-N which was slowly to $NO_3$-N which governed the downward movement of inorganic N applied in the soil. Downward movement of inorganic nitrogen was relatively slow in the early growing stages of ladino clover when $NH_4$-N form was the major inorganic nitrogen in the soil. In the later growing stages when $NO_3$-N was the major form, inorganic nitrogen moved rapidly with soil water. Favorable soil moisture condition increased downward movement and plant uptake of inorganic nitrogen. In the non irrigated bare soil 92% of applied nitrogen was leached downwards out of the microplots at the final harvest. Under the non-irrigated condition 57% of applied nitrogen was taken up by plants and 37% of nitrogen remained in the soil 5.5 months after sowing. Nitrogen uptake by plants in the microplots irrigated at 0.2 bar was 4.03g/microplot at the final harvest, which was more than the amount of nitrogen applied.