• Korean Journal of Pharmacognosy
• /
• v.53 no.2
• /
• pp.111-118
• /
• 2022

Chestnut honey is a sweet dark-colored honey with a distinct bitter aftertaste. It contains numerous phenolic compounds and alkaloids and is noted for its antioxidant and anti-inflammatory activities. However, it has been established that there are differences in the composition and activity of chestnut honey constituents depending on the region of origin, the sources of which warrant further research. In this study, we analyzed the kynurenic acid (KA) contents in chestnut honey produced in nine different regions in Korea, using high-performance liquid chromatography in conjunction with ultraviolet detection, and validated the analytical method developed. Use of a reverse-phase column and detection at a wavelength of 240 nm were found to be optimal for the detection of KA. Similar evaluation of an optimal method for extracting KA from chestnut honey revealed that extraction using 10% EtOH at 20 times the sample volume over a 6 h period was the most suitable for obtaining a high content of KA. Among the nine regional chestnut honeys assessed, KA content was found to be highest in the "Gongju" sample (1.14 mg/g), followed by that in the "Cheongdo" and "Damyang" samples. Validation of the KA analytical method revealed a good analyte linearity, with a correlation coefficient (r²) of 0.9995, an accuracy of between 92.37% and 107.35%, and good precision (RSD ≤ 1.05%). Our findings in this study, based on a validated quantitative analytical method for KA, could make an important contribution to establishing a data profiling procedure for characterizing chestnut honeys produced in different regions, and may also provide basic data for the identification of functional honey.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.537-544
• /
• 2019

In currently electronic systems, the speed of information integration has increased due to the development of electronic technology. However, due to the increase in the number of parts and groups, the product structure has become complicated. In this paper, a study was conducted to evaluate quantitatively the replacement of a small equipment. First, the level of the replacement was determined through the algorithm for the replacement level of parts. Next, we defined the ease of detail replacment, and the factors for each detail replacement. In order to calculate the weighting of the detail ease, we performed the analysis of the replacement process of subcomponents of communication exchanger and defined the evaluation criteria. Finally, the completion of the evaluation check sheet and the evaluation score table.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.91-100
• /
• 2004

Energy efficiency evaluation method for a multi-type air conditioning system still has not been developed. In this study, analysis on capacity range and evaluating method of standards for air conditioners was conducted with world-wide Standards. It is not a proper approach to use the standards for residential air conditioner to multi type air conditioners. Some difficulties and problems are commented in this study with overview of the standards. Through the analytic research, an evaluating method for multi type air conditioner was suggested with Integrated Part Load Value (IPLV). The suggested concept for evaluating energy efficiency during part load condition considers building load pattern and operating hours of the system at different locations. Load was weighted in IPLV to consider not only the concept of occurrence of outdoor temperature such as bin method but also operation hours of the system. An experiment about the IPLV was conducted with variable air volume ducted type air conditioning system and multi-type system through modified code tester to give a glance at quantitative value of the IPLV.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.2 no.2
• /
• pp.1-7
• /
• 2005

For the reliability evaluation of the track drive unit(TDU), firstly, we analyzed the major failure modes through FMEA(failure mode & effects analysis), FTA(failure tree analysis), and 2-stage QFD(quality function deployment), and then quantitatively determined the priority order of test items. The Minitab analysis was also performed for prediction of life distribution and parameters of TDU by use of field failure data collected from 430 excavators for two years. In addition, we converted the fluctuation load in field conditions into the equivalent load, and for evaluation of the accelerated lift by the cumulative fatigues, the equivalent load is again divided into the fluctuation load by reference of test time. And then, by use of the test method in this paper, the acceleration factor(AF) of needle bearing inside planetary gear which is the most weakly designed part of TDU is achieved as 5.3. This paper presents the quantitative selection method of test items for reliability evaluation, the determination method of the accelerated life test time, and the method of non-failure test time based on a few of samples. And, we proved the propriety of the proposed methods by experiments using a TDU for a 30 ton excavator.

• Structural Engineering and Mechanics
• /
• v.71 no.6
• /
• pp.751-761
• /
• 2019

Lamb wave technology is a promising technology in the field of structural health monitoring and can be applied in the detection and monitoring of defects in plate structures. Based on the reconstruction algorithm for the probabilistic inspection of damage (RAPID), a Lamb-based detection and evaluation method of through-thickness rectangular notches in metal plates was proposed in this study. The influences of through-thickness rectangular notch length and the angle between sensing path and notch length direction on signals were further explored through simulations and experiments. Then a damage index calculation method which focuses on both phase and amplitude difference between detected signals and baseline signals was proposed. Based on the damage index difference between two vertically crossed sensing paths which pass through the notch in a sensor network, the notch direction identification method was proposed. In addition, the notch length was determined based on the damage index distribution along sensing paths. The experimental results showed that the image reconstructed with the proposed method could reflect the information for the evaluation of notches.

• Journal of Technology Innovation
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2001

Importance of technology evaluation cannot be overemphasized to support the effective investment policy. Most of the technology evaluation relies on either quantitative analysis for the value or qualitative comparison due to some attribute. When qualitative comparison is made, typically not only individual attribute. but also overall score is evaluated by the committee of experts. In this paper, we consider the qualitative evaluation procedure used in a venture incubating center and validate if the relationship between the average score of individual attribute and the overall score is significant. Additionally, we identify if the initially evaluated scores are good indicators for the realized future value of technology. Structural equation modeling approach is used and we expect that our approach can make important contributions on improving the currently used technology evaluation method.

• Knowledge Management Research
• /
• v.9 no.1
• /
• pp.117-128
• /
• 2008

It is very crucial to establishing an evaluation framework for anayzing the investment effects of IT asset such as knowledge managment systems. However, evaluation by quantitative measures, in spite of its usefulness and reliability, may have weakness in examining wide range of effects of the IT investment. Hence, the purpose of this paper is to propose a novel framework to evaluate the performance in terms of wider range of informatization effects. To do so, knowledge management concepts has been adopted in the evaluation method, and Impact Of Investment(IOI) has been suggested. IOI is used to derive Value Of Investment(VOI) and then ROI.

• Journal of Welding and Joining
• /
• v.18 no.5
• /
• pp.77-83
• /
• 2000

This study proposes the analysis and evaluation method of time series ultrasonic signal using the attractor analysis. Features extracted from time series signal analyze quantitatively characteristics of weld defects. For this purpose, analysis objective in this study is fractal dimension and attractor quadrant feature. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange even though the types of defects are identified. These difference in characteristics of weld defects enables the evaluation of unique characteristics of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hole) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimensions. Proposed attractor analysis and DAC in this study can enhance the precision rate of ultrasonic evaluation for defect signals of rail weld zone such as side hole and crack.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.169-177
• /
• 2015

This paper described a fuzzy comprehensive evaluation method and implemented assessment system for multi-layer decision making. The proposed method is a assessment before bidding through the key questions using fuzzy comprehensive evaluation method and the entropy weights. The key questions are given by the wider investigation of major sports event organizers. The paper carried out evaluation of single factor and fuzzy comprehensive evaluation from low layer to high layer step by step. In order to verify the effectiveness of proposed method, we built the sports event management service platform (SEMSP) for assessment of applicant city. This method represents a unified one of the quantitative results and the qualitative results based on the judgment of experts.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.999-1005
• /
• 2021

The object of this research is CS, which increases resolution while shortening inspection time, is applied to MRA to compare the quality of images for SENSE and CS techniques and to evaluate SNR and CNR to find out the optimal techniques and to provide them as clinical basic data based on this information. Data were analyzed on 32 patients who performed TOF MRA tests at a university hospital in Chung cheong-do (15 males, 17 females), ICA stenosis:10, M1 Aneurysm:10, and average age 53 ± 4.15). In the inspection, the inspection equipment was Ingenia CX 3.0T, Archieva 3.0T, and 32 channel head coil and 3D gradient echo as a method for equipment data. SNR and CNR of each image were measured by quantitative analysis, and the quality of the image was evaluated by dividing the observer's observation into 5 grades for qualitative evaluation. Imaging evaluation is described as being significant when the p-value is 0.05 or less when the paired T-test and Wilcoxon test are performed. Quantitative analysis of SNR and CNR in TOF MRA images Compared to the SENSE method, the CS method is a method measurement method (p <0.05). As an observer's evaluation, the sharpness of blood vessels: CS (4.45 ± 0.41), overall image quality: CS (4.77 ± 0.18), background suppression of images: CS (4.57 ± 0.18) all resulted in high CS technique (p = 0.000). In conclusion, the Compressed SENSE TOF MRA technique shows superior results when comparing and evaluating the SENSE and Compressed SENSE techniques in increased flow rate magnetic resonance angiography. The results are thought to be the clinical basis material in the 3D TOF MRA examination for brain disease.