• Tribology and Lubricants
• /
• v.13 no.2
• /
• pp.8-15
• /
• 1997

It is very difficult to express the state of a tested engine objectively concerning the malfunction, failure and wear of an engine. The general method of engine evaluation is to express evaluator's opinion for the engine state after testing. However, these methods is only subjective evaluation because test engineers, designers, and evaluators does not easily coincide in opinion. Therefore, in this article, the method of engine rating are introduced in order to represent the qualitative trends into quantitative value. The purpose of Engine Rating is to assign a quantified value to the tribology state of a tested engines. Originally, this Engine Rating method have been used to evaluate the performance of engine oil quantitavely. Using this method, we can predict the proper interval of engine oil change due to its objectivity. So, we can prevent the frequent change of engine oil and protect the environmental contamination. Furthermore, this method can be used to tell the general state of a tested engine after finishing engine durability tests. A single merit scale is used to evaluate numerically the state of cleanliness and the mechanical condition. Generally, a part which is absolutely clean or shows no wear, is rated merit 10. A part which is absolutely dirty or very worn, is rated merit 0.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.240-247
• /
• 1998

This paper proposed a method for solving the nonlinear integer programing problem to get easily the best compromise solution while holding a nonlinear property by using the genetic algorithms. Also, this paper reported that the optimization problem of systems reliability as was solved by using the preposed method, and the numerical comparison experiments between the 0-1 LP/0-1 NP formulations were demonstrated, and from the quantitative evaluation the efficiency of the proposed method was demonstrated.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.103-105
• /
• 2002

Whole body stereotactic radiosurgery (WBSRS) technique is believed to be useful for the metastatic lesions as well as relatively small primary tumors in the trunk. Unlike stereotactic radiosurgery to intracranial lesion, inherent limitation on immobilization of whole body makes it difficult to achieve the reliable setup reproducibility. For this reason, it is essential to develop an objective and quantitative method of evaluating setup error for WBSRS. An evaluation technique using image registration has been developed for this purpose. Point pair image registrations with WBSRS frame coordinates were performed between two sets of CT images acquired before each treatment. Positional displacements could be determined by means of volumetric planning target volume (PTV) comparison between the reference and the registered image sets. Twenty eight sets of CT images from 19 WBSRS patients treated in Asan Medical Center have been analyzed by this method for determination of setup random error of each treatment. It is objective and clinically useful to analyze setup error quantitatively by image registration technique with WBSRS frame coordinates.

• 보존과학연구
• /
• s.30
• /
• pp.125-136
• /
• 2009

Stone cultural heritages in Korea have a severe damages from chemical and biological weathering because most of them have been situated in outdoors without any suitable protection systems, and this in turn causes deformation and structural damage. To counteract these problems and increase durability, various kinds of conservation materials are used in the conservation and restoration treatments. However until now there are not many practical and technological experiments on this subject. This paper attempts quantitative evaluation of effectiveness about chemical of ethylsilicate based resin for sandstone in Yeongyang-gun. It takes a long time to evaluate durability and side effect after conservation materials treatment. So we use artificial weathering through freezing§ thawing experimental method. As a result of this experiment, porosity and absorptance increased, and elastic wave speed, elastic modules, unconfined compression strength and tensile strength decreased more than before. This study plans to make a scientific method study about weathering factor and mechanism, and to deduce correlation between artificial weathering and natural weathering.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.12
• /
• pp.678-684
• /
• 2004

Automatic reclosing is a typical protection method in power distribution systems for clearing the temporary faults. However, it has a fatal weakness in regards to voltage sags because it produces successive voltage sags. In this paper, we explored successive impact of voltage sag due to the automatic reclosing of power distribution systems. The actual tests of low voltage loads were accomplished for obtaining the susceptibility of voltage sags. The final results of the test yielded power acceptability curves of voltage sag, and the curves were transformed the 3-dimensional CBEMA(Computer Business Equipment Manufacturer Association) format. For the quantitative evaluation of the impact of successive voltage sags, an assessment formulation using the voltage sag contour was proposed. The proposed formulation was tested by using the voltage sag contour data of IEEE standard and the results of the test. Through the case studies, we verified that the proposed method can be effectively used to evaluate the actual impact of successive voltage sans.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.293-299
• /
• 2005

Automatic reclosing is a typical protection method in power distribution systems for the clearing of temporary faults. However, it has a fatal weakness in regards to voltage sags because it produces repetitive voltage sags. In this paper, we explored the repetitive impact of voltage sag due to the automatic reclosing of power distribution systems. The actual tests of low voltage loads were carried out for obtaining the susceptibility of voltage sags. The final results of the tests yielded power acceptability curves of voltage sag, and the curves transformed the 3-dimensional CBEMA (Computer Business Equipment Manufacturer Association) format. For the quantitative evaluation of the impact of repetitive voltage sags, an assessment formulation using the voltage sag contour was proposed. The proposed formulation was tested by using the voltage sag contour data of IEEE standard and the results of the test. Through the case studies, we verified that the proposed method can be effectively used to evaluate the actual impact of repetitive voltage sags.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2341-2347
• /
• 2021

Because single-photon emission computed tomography (SPECT) is one of the widely used nuclear medicine imaging systems, it is extremely important to acquire high-quality images for diagnosis. In this study, we designed a super-resolution (SR) technique using dense block-based deep convolutional neural network (CNN) and evaluated the algorithm on real SPECT phantom images. To acquire the phantom images, a real SPECT system using a^99mTc source and two physical phantoms was used. To confirm the image quality, the noise properties and visual quality metric evaluation parameters were calculated. The results demonstrate that our proposed method delivers a more valid SR improvement by using dense block-based deep CNNs as compared to conventional reconstruction techniques. In particular, when the proposed method was used, the quantitative performance was improved from 1.2 to 5.0 times compared to the result of using the conventional iterative reconstruction. Here, we confirmed the effects on the image quality of the resulting SR image, and our proposed technique was shown to be effective for nuclear medicine imaging.

• The KIPS Transactions:PartD
• /
• v.16D no.1
• /
• pp.73-82
• /
• 2009

Open Source Software has over 60 percent of application software development but previous studies of objective quality model and characteristic to utilize Open Source Software appeared to be low and there are few studies regarding quantitative evaluation methods to evaluate Open Source Software. To solve these problems, in this paper, we propose a quality evaluation model, "Logical Open Source Software quality model", which is able to utilize for developing and maintaining application software and quantitative quality evaluation method that can utilize in the proposed model. The proposed Open Source Software quality model derives quality characteristics based on literature and it forms six main-features and twelve sub-characteristics by comparing with the quality characteristic of ISO/IEC 9126 and twelve evaluation metrics that can measure the metrics and the characteristics quantitatively. To verify efficiency of the proposed quality evaluation model, we apply the proposed quality evaluation to top 5 project management system (PMS) software in open source software community and prove its availability.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.2
• /
• pp.45-56
• /
• 2003

The purpose of this study is to develop the model including multiple causal relationship between factors to evaluate overall user satisfaction and develop an objective method to quantify the impacts and scores of each qualitative factors on overall user satisfaction using Structural Equation Model(SEM) and also test the feasibility to construct a comprehensive website evaluation model including qualitative and quantitative factors. The SEM model used 2 qualitative factors of usability and esthetic factors for the evaluation factors of user satisfaction and select 4 attributes of each factors using factor analysis. 3 shopping mall sites were evaluated to construct the SEM model, and 155 subjects participated the website evaluation using the walk-through and face-to-face survey method. Analysis results showed that the SEM model was statistically significant for all the 3 websites evaluated. Both the usability and esthetic factors showed significant effects to user satisfaction of websites and have positive correlation. The user satisfaction was more effected by the usability factor than esthetic factors, and the simplification and harmonization were the most critical attributes of the usability and esthetic factors.

• Journal of Digital Convergence
• /
• v.8 no.1
• /
• pp.81-92
• /
• 2010

This study focuses on the evaluation of an article about the AHP methodology in project area at 2001 edition. It is titled, "Application of AHP in project management," by K.M.A.S-S. Al-Harbi. This paper presents the Analytical Hierarchy Process (AHP) as a decision making method in project management. The evaluation by each section is based on the model by Fred Pyrczak (2008) in Evaluating Research in Academic Journals. This paper has an implication that evaluation method can be shown by quantitative numerical value.