• 품질경영학회지
• /
• 제52권1호
• /
• pp.135-148
• /
• 2024

Purpose: This study is to investigate the literature on accelerated tests based on the acceleration model and to provide a compilation of results on the parameters applied in the acceleration model and the test conditions. Methods: This research is conducts a literature review on accelerated tests using the acceleration model, with a focus on test targets, test conditions, and parameter values. The study is organizing the results of this literature review to facilitate their application in the design of reliability tests. Results: A literature review investigated a variety of test targets, test conditions, and parameter values. Conclusion: The results of the literature research conducted revealed various acceleration model parameter. Such literature research on accelerated tests can establish the foundation for reliability test design and contribute to future product development and quality improvement

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2048-2055
• /
• 2001

This paper develops a computational model for estimating the ride quality of a cabover type large-sized truck in a double wheel bumpy ride test. The computational model is developed using ADAMS. To verify the developed model, an actual vehicle double wheel bumpy ride test is performed. In the test, the vehicle maintains a straight course with a constant velocity such that the front two wheels are passed the bump at the same time. The bump has the height of 60mm, and the width of 550mm. In the test, four velocities are used. They are 10kph, 20kph, 30kph and 40kph. Since the large-sized truck's center of gravity location is high, and its weight is heavy, it is a quite severe test condition to perform the test with more than 30kph velocity. In the test, vertical accelerations on the floor of the cab are measured. The measured accelerations are compared to the simulation results. From the comparison, it is shown that the developed model can predict not only the measured acceleration's tendency but also peak accelerations quite well. In this paper, the validated model is utilized to compare the ride quality between a vehicle with a multi-leaf spring and a vehicle with a tapered leaf spring in the front suspension system in a double bumpy ride test.

• 품질경영학회지
• /
• 제29권4호
• /
• pp.92-102
• /
• 2001

Software testing during development and operation should exercise to obtain the desired software quality and leave failure data set. So far, many software reliability models are classified and can be used to measure a software reliability only based on its failure history But, in practice, developers or testers of software systems must decide which existing software reliability model can be fitted. In this paper, we will show that an appropriate reliability model can be selected by considering relations between characteristics of each testing environment and models' assumptions. Several methods of software testing are presented and discussed. Also, unit test, integrated test, function test and system test that are sequentially exercised during development will be introduced.

• 품질경영학회지
• /
• 제36권4호
• /
• pp.93-101
• /
• 2008

The rare metals, used for semiconductors, PDP-LCS and other specialized metal areas necessarily, has been playing a key role for the Korean economic development. Rare metals are influenced by exogenous variables, such as production quantity, price and supplied areas. Nowadays the supply base of rare metals is threatened by the sudden increase in price. For the stable supply of rare metals, a rational demand outlook is needed. In this study, focusing on the domestic demand for chromium, the uncertainty and probability materializing from demand and price is analyzed, further, a demand forecast model, which takes into account various exogenous variables, is suggested, differing from the previously static model. Also, through the OOS(out-of-sampling) method, comparing to the preexistence ARIMA model, ARMAX model, multiple regression analysis model and ECM(Error Correction Mode) model, we will verify the superiority of suggested model in this study.

• 한국항행학회논문지
• /
• 제27권2호
• /
• pp.228-234
• /
• 2023

고품질 소프트웨어의 요구 증가로 국제표준, 산업 기능안전(IEC 61508), 자동차(ISO 26262), 무기체계 내장형 소프트웨어 지침 등 품질 인증 요구가 많다. 스타트 업, 벤처, 중소 업체들은 비용 및 인력 측면에서 체계적인 품질 획득이 어려움이 있다. 그들 업체에게 자동 테스트 케이스 생성은 비용, 시간, 인력 문제에도 소프트웨어 품질을 향상할 수 있는 해법으로 제시 될 수 있다. 이를 위해, 시스템 및 소프트웨어 설계 검증이 가능한 "의사 결정표" 기반 테스트 케이스 자동화를 제안한다. 이는 OMG의 표준 기법인 메타모델과 모델 변환 기법을 사용해 각각 의사 결정표(Model)와 테스트 케이스(Text)의 메타모델 설계 및 모델변환을 정의한다. 즉 의사 결정표 입력으로 테스트 케이스 발생 자동화이다. 이를 통해 MC/DC 커버리지등도 쉽게 적용 가능하다.

• 한국콘텐츠학회논문지
• /
• 제10권6호
• /
• pp.156-165
• /
• 2010

국내에선 ESM(Enterprise Security Management)이 보안관리를 대표하고 있고, 이를 더욱 고도화해야 한다는 요구가 증가하고 있다. 본 논문에서는 기업보안관리(ESM) 제품의 질적인 면을 평가하고 품질 수준을 파악하여 개선방향을 도출함으로써 품질향상을 지원할 수 있는 보안성 평가모델과 시험 방법론에 대해서 개발하였다. 그리고 제품의 보안성 품질을 측정하고 그 결과를 적절한 기준에 따라 판정하는 방법에 대해 연구를 수행하고자 성능시험사례를 제시하여 평가방법을 제시하였다. 도출된 품질평가 모델은 침입방지 시스템의 품질을 평가하고 향상시키는데 중요한 역할을 하게 될 것으로 기대한다.

• 품질경영학회지
• /
• 제35권1호
• /
• pp.61-72
• /
• 2007

The purpose of this research is to identify causalities among service quality, service value, customer satisfaction and customer loyalty. A Structural Equation Model is used to test the hypothesis of conceptual model. To test the model, we collect data by conducting a survey with 508 patients. Empirical result indicates that three factors such as tangibles, assurance, and empathy have direct impact on service value and customer satisfaction. Especially, customer loyalty is positively related not with service value but with customer satisfaction.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.74-96
• /
• 2002

The objectives of this study is to suggest the rectifying sampling inspection plan considering quality cost. Limiting quality level(LQL) plans(also called LTPD plans) and outgoing quality(OQ) plans are considered. The Hald's linear cost model is discussed with and without a beta prior for the distribution of the fraction of nonconforming items in a lot. It is assumed that the sampling inspection is error free. We consider the design of reliability acceptance sampling plan (RASP) for failure rate level qualification at selected confidence level. The lifetime distribution of products is assumed to be exponential. MIL-STD-690C and K C 6032 standards provide this procedures. But these procedures have some questions to apply in the field. The cost of test and confidence level(1-$\beta$ risk) are the problem between supplier and user. So, we suggest that the optimal life test sampling inspection plans using simple linear cost model considering product cost, capability of environment chamber, environmental test cost, and etc. Especially, we consider a reliability of lots that contain some nonconforming items. In this case we assumed that a nonconforming item fail after environmental life test. Finally, we develope the algorithm of the optimal sampling inspection plan based on minimum costs for rectifying inspection and RASP. And computer application programs are developed So, it is shown how the desired sampling plan can be easily found.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.1-21
• /
• 2002

The purpose of this study was to empirically examine the customer oriented quality creation by considering quality elements required by customers in the product design process. The study tried to extract attractive quality elements by using Kano's model. After identifying the elements HOQ(the house of quality) of QFD(quality function deployment) was used to identify the trend of quality elements evaluation. Test for equal means (t-test) was applied to verify the attractive quality elements of adult shoes. It made us find the customer oriented quality elements from the customer needs and latent dissatisfaction. We collected the opinions of experts on shoes and complete the cause and effect diagram and affinity diagram (KJ method). The data of the questionnaire was put to the QFD and the contents of quality elements was identified by brain storming method. We calculated indexes which were the multiplication of weight and marks of quality elements in the cross table of the HOQ by QFD. Then we tested for the equality of means between the indexes and the sum of attractive quality elements. The results for equal means were statistically significant. To create the customer quality the product design should be differentiated between the age groups over attractive quality elements.

• 디지털콘텐츠학회 논문지
• /
• 제13권4호
• /
• pp.625-629
• /
• 2012

NGN 운용과정의 품질 보증을 위해 어떤 체계하에서 품질이 테스트 되어야 하는지 방법론을 도출하기 위해서 멀티미디어 트래픽을 중심으로 NGN 품질측정 프레임워크를 제시한다. 테스트베드는 NGN 운용과정에서 QoS 측정 메트릭스, 측정구간과 측정계위, 측정도구, 측정장비, 측정방법 및 측정결과 분석에 대한 일련의 프로세스와 방법론을 모델화한다. 이 모델은 향후 NGN 품질보증 활동에 활용토록 한다. 통신서비스 품질은 스스로 보장되지 않으며 끊임없이 측정되고 관리될 때에 만 품질 목표수준 확보가 가능하다. NGN 네트워크기술 패러다임 중요성을 감한할 때 NGN 운용상의 품질관리에 대한 연구는 앞으로 활발하게 추진되어야 할 핵심 소재이다.