• Journal of the Korea Concrete Institute
• /
• 제16권3호
• /
• pp.327-334
• /
• 2004

In this paper, method for the determination of removal time of the side forms in high strength concrete are discussed using the estimation model of compressive strength development, the development of bond strength and rebound number of P type Schmidt hammer in order to review the validity of existing regulation as to side form removal and offer effective quality control method. According to the results, as W/B increases by $10\%$, the setting time is shortened by about 2 hours. In the scope of the paper, required time to gain 8MPa of compressive strength is determined about 17 ${\~}$20 hours of age and $21{\~}25^{\circ}D{\cdot}D$ of maturity. Bond strength between form and concrete shows the highest value around final setting time, but decreases drastically after that. Amount of concrete sticking on the form is large before setting completed, but after that, its amount shows decline tendency. The rebound value test with P type schmidt hammer can be started faster by 2${\~}$3 hours than compressive strength test. It is also confirmed that the removal of forms is possible when the rebound value of P type schmidt hammer is more than 32. It is found from the results that existing regulation regarding removal time of the side form of high strength concrete provided in KCI needs no revision because required time to gain the strength provided in KCI has no adverse effect on strength development at early age and surface condition during stripping the side form. Effective procedure to decide the removal time of side form can be performed by applying P type Schmidt hammer.

• The Journal of Korean society of community based occupational therapy
• /
• 제6권1호
• /
• pp.41-48
• /
• 2016

Objective : We tried to know the improvement and neurological effect of diabetes when the complex exercise training was applied on diabetes that delayed the recovery of the ischemic brain injury. Methods : We performed this study in a animal lab which located in Gyengsangbukdo. We used 10 diabetes rats with ischemic brain injury, which is induced by STZ. We applied the complex exercise training on the rats for 4 weeks. We executed the maze test to confirm the recovery of the brain function and checked the blood sugar to know the improvement. Results : As a result of applying the complex exercise on diabetes rats with ischemic brain injury, there was a significant reduce of error and escape time in 3 weeks and 1 weeks, respectively. There was no difference of the blood sugar in control but there was a significant improvement in experiment group after applying the exercise training in 4 weeks. Conclusion : The senile disease like stroke and diabetes was increased currently. It is important for rehabilitation to improve the quality of life during the remainder of their life. In the study, we've known the improvement of diabetes and the recovery of the brain function when the complex exercise training was applied the rats with both diabetes and the ischemic brain injury.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제20권11호
• /
• pp.85-95
• /
• 2019

Establishing nursing professionalism is important for providing quality nursing care in various clinical settings and adapting to changing roles in a range of situations. The aim of this study was to identify the influence of volunteer activities and sense of community on nursing professionalism for nursing students. A convenience sampling method of 160 students in a nursing department of university in D city was used in June 2019. Data were analyzed using a t-test, ANOVA, Pearson's Correlation Coefficients, and hierarchical multiple regression analysis. The results of this study were as follows. The nursing professionalism score was above the middle level and differed according to the volunteer motivation and activity continuity significantly. Satisfaction with volunteer activities had a significant positive correlation with a sense of community (r=.47, p<.001), and nursing professionalism had a significant positive correlation with the satisfaction with volunteer activities (r=.51, p<.001). The factors affecting nursing professionalism were a sense of community (p<.001) and satisfaction with volunteer activities (p<.001); this model could explain 37.9% (F=20.38, p<.001). Therefore, nursing students are encouraged to participate voluntarily in a range of activities linked to their field, nurture a sense of community, and develop nursing education programs that help build pride as a nurse and establish nursing professionalism.

• Progress in Medical Physics
• /
• 제29권1호
• /
• pp.8-15
• /
• 2018

This work reports the acceptance testing and commissioning experience of the Robotic Intensity-Modulated Radiation Therapy (IMRT) M6 system with a newly released $InCise^{TM}2$ Multileaf Collimator (MLC) installed at the Yonsei Cancer Center. Acceptance testing included a mechanical interdigitation test, leaf positional accuracy, leakage check, and End-to-End (E2E) tests. Beam data measurements included tissue-phantom ratios (TPRs), off-center ratios (OCRs), output factors collected at 11 field sizes (the smallest field size was $7.6mm{\times}7.7mm$ and largest field size was $115.0mm{\times}100.1mm$ at 800 mm source-to-axis distance), and open beam profiles. The beam model was verified by checking patient-specific quality assurance (QA) in four fiducial-inserted phantoms, using 10 intracranial and extracranial patient plans. All measurements for acceptance testing satisfied manufacturing specifications. Mean leaf position offsets using the Garden Fence test were found to be $0.01{\pm}0.06mm$ and $0.07{\pm}0.05mm$ for X1 and X2 leaf banks, respectively. Maximum and average leaf leakages were 0.20% and 0.18%, respectively. E2E tests for five tracking modes showed 0.26 mm (6D Skull), 0.3 mm (Fiducial), 0.26 mm (Xsight Spine), 0.62 mm (Xsight Lung), and 0.6 mm (Synchrony). TPRs, OCRs, output factors, and open beams measured under various conditions agreed with composite data provided from the manufacturer to within 2%. Patient-specific QA results were evaluated in two ways. Point dose measurements with an ion chamber were all within the 5% absolute-dose agreement, and relative-dose measurements using an array ion chamber detector all satisfied the 3%/3 mm gamma criterion for more than 90% of the measurement points. The Robotic IMRT M6 system equipped with the $InCise^{TM}2$ MLC was proven to be accurate and reliable.

• Spatial Information Research
• /
• 제17권1호
• /
• pp.131-144
• /
• 2009

Recently, a lot of local autonomous entities are promoting Ubiquitous City(U-City) Construction by integrating Information Communication Technology(ICT) with city development, and also internationally, a lot of cities are making efforts to develop U-City to intensify a city's competitive strength and improve life quality of city dwellers. In keeping with such a stream of the times, each local autonomous entity and project developer are developing a lot of methodologies to establish optimal U-City in corresponding cities and also inquiring into a variety of development procedures, such as connecting existing urban development methods with information establishment methods. The method used usually is to establish Information strategy Plan(ISP) for a city which will be developed through consulting in the stage of city development planning. ISP is to establish vision & strategy for building the ubiquitous city and is a methodology including city vision, strategy, goal, and implementation method, etc. However, due to a lot of variables, such as a variety of city environment, establishment period, budget, information technology, and etc., it is difficult to contain establishment plans for every occasion in a similar method, in reality. Therefore, it is naturally necessary to suggest plans for city vision & strategy, and selection of element technology/service. Thus, this paper suggests models for vision & strategy establishment of U-City and suggests Top-Down Approach and Bottom-Up Approach method as a plan for U-City establishment. In addition, this paper analyzes general promotion methodologies for constructing U-City and analyzes how these two strategic methods [Top-Down Approach and Bottom-Up Approach] for city vision establishment are composed in such a methodology, to define and analyze its constituent plan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제33권4호
• /
• pp.1619-1629
• /
• 2013

It turned out that there was a direct or an indirect relationship among global warming, urban heat island effects, urban and traffic environments, and public's health. In particular, unusual climate phenomena such as frequent heavy rainfall and scorching heat in a row that had rarely happened before have a negative effect on quality of life for people living in urban areas. This study focuses on the effects of roadway geometric design and traffic conditions on air temperature of roadside in Seoul Metropolitan Areas, controlling of roadway micro-climate environment. Five roadway segments containing different roadway and traffic conditions in terms of traffic median with trees, street trees, traffic volume and average travel speeds were surveyed. According to statistical results(t-test) from three roadway air temperature regression model estimations, air temperature is found to be different from one another in three periods-morning, afternoon and evening. Regarding roadway geometric design, air temperature of urban roads with vegetated median strips is lower about 1.3~2.2 degrees in celcius. Higher traffic volumes per lane and lower average travel speeds will tend to increase roadside air temperature, and efficient traffic operation policies can protect from increasing roadside air temperature in urban areas.

• Journal of Food Hygiene and Safety
• /
• 제19권2호
• /
• pp.74-83
• /
• 2004

Raw-fish food contains a lot of moisture and is a high-protein food. It is a first-stage processed food taking a lot of manual work. Therefore, it is classified as a PHF food, very liable to cause a bacterial food-poisoning. But its manufacturers are usually small-sized and a systematic sanitation management is difficult to expect. But the manufacturer participating in this study produces chilled fresh raw-fish food. Fish are sliced into two fillets, which are packaged under vacuum, kept and distributed in refrigerators, and sold within a day. It is a newly-developed kind of raw-fish food, and a more improved kind of raw-fish food making possible a systematic sanitation management. The HACCP (Hazard Analysis and Critical Control Point) is a systematic and continuous process-control method which is very efficient for controling food sanitation and reducing the expenses. A new HACCP model has been developed to be applied to a large-sized chilled fresh raw-fish food manufacturer. To ascertain its efficiency, the baterial examination was done to its workplace and products. The significance test was done on its data by "SPSS 12.0 for Window" and "Mann-Whitney U Test". The numbers of bacteria on its final products were significantly different in flatfish and porgy. The number of bacteria tended to decrease in each time-differential sampling (P＜.00l). The final food products showed no food-poisoning bacteria in all the time-differential tests and in all the samplings, which proves that the CCP of the HACCP system is under control. After the SSOP program was applied, no pathogenic bacteria were found in the work-place, and the kinds and numbers of bacteria decreased. The numbers of general bacteria and colon bacilli also showed a significant difference from those before the SSOP program in the filleting board (P＜.05), in the skinning board (P＜.0l), in the neck-removing knife (P＜.05), and in the filleting knife (P＜.01). The working equipments, periodically disinfected, also showed a significant difference in sanitary conditions (in the dehydrator, P＜.05). The number of bacteria found on the food-touching surface was within the standard (below 500/l00 cm$^2$) After the SSOP program was applied, the general bacteria and colon bacilli were not found. The quality of water used in the food processing was also within the standard. The numbers of bacteria falling from the air in the work-place were negligible in all the samplings (＜30CFU/l000ι). The staphylococci and fungi were not found.

• The Journal of the Korea Contents Association
• /
• 제16권7호
• /
• pp.50-62
• /
• 2016

The aim of this study was to develop scale of test taker to affect on process of selection of college. The study procedures were performed as follow : establish of study model, item generation, verification of content validity, 1st and 2nd pilot test and verification of construct validity and reliability. In order to verification of validity and reliability, 230 freshman were surveyed and the data were analyzed by mean, standard deviation, skewness. kurtosis, Pearson correlation, Verimax factor analysis and Cronbach's ${\alpha}$. As result of factor analysis, the 15 factors(61 items) that explain 68.37% of the total variance were extracted and each factors were classified by attribution as follow : Information collection-mass media(4items), college activity (3items), support and environment(4items), education(5items), Influential person on decision making(3items), education quality(4items), education service(5items), reputation(3items), accessibility(2items), personal circumstances(2items), college's mass media(5items), promotion (4items), on-line(4items), person's PR (3items), College image(10items). Cronbach's ${\alpha}$ of total items was 0.916 and Cronbach's ${\alpha}$ of each factors were showed range between 0.694~0.878. Measurement scale of this study may be utilized to collect basic data be required to establish policy strategy of local college be faced with difficulty of admission recruitment.

• Journal of the Korean Geotechnical Society
• /
• 제35권6호
• /
• pp.17-26
• /
• 2019

In this study, the statistical characteristics of the resistance bias factors were analyzed using a high-quality field load test database, and the total resistance bias factors were estimated considering the soil uncertainty and construction errors for the application of the limit state design of aggregate pier foundation. The MLR model by Bong and Kim (2017), which has a higher prediction performance than the previous models was used for estimating the resistance bias factors, and its suitability was evaluated. The chi-square goodness of fit test was performed to estimate the probability distribution of the resistance bias factors, and the normal distribution was found to be most suitable. The total variability in the nominal resistance was estimated including the uncertainty of undrained shear strength and construction errors that can occur during the aggregate pier construction. Finally, the probability distribution of the total resistance bias factors is shown to follow a log-normal distribution. The parameters of the probability distribution according to the coefficient of variation of total resistance bias factors were estimated by Monte Carlo simulation, and their regression equations were proposed for simple application.

• Journal of Digital Convergence
• /
• 제17권7호
• /
• pp.131-138
• /
• 2019

The world's electricity production ratio is 40% for coal, 20% for natural gas, 16% for hydroelectric power, 15% for nuclear power and 6% for petroleum. Fossil fuels also cause serious problems in terms of price and supply because of the high concentration of resources on the earth. Solar energy is attracting attention as a next-generation eco-friendly energy that will replace fossil fuels with these problems. In this study, we test the charge-operation plan and the discharge operation plan for peak-cut operation by applying the maximum power demand reduction simulation. To do this, we selected the electricity usage from November to February, which has the largest amount of power usage, and applied charge / discharge logic. Simulation results show that the contract power decreases as the peak demand power after the ESS Peak-cut service is reduced to 50% of the peak-target power. As a result, the contract power reduction can reduce the basic power value of the customer and not only the economic superiority can be expected, but also contribute to the improvement of the electric quality and stabilization of the power supply system.