• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.125-133
• /
• 2006

In this study, the Korean Industrial Standard(KS) penetration grade system was examined to evaluate its statistical validity. It was found from this limited study that the system has no gap between each grade, the binder falling out of limit trespasses into other binder grade. Therefore, many products can have similar property level with an adjacent grade even though the mean value is within the specification limit. It was also found out that the equal range setup of each grade, such as 20 for 40-60, 60-80, 80-100, has no statistical foundation. Since KS penetration grade is defined without gap between each grade, the producer must maintain the coefficient of variation below the level by the ASTM system to satisfy the normal quality control limit of products. Due to its lack of a gap between grades, higher percentage of products will be duplicated even if the mean is at the median of the specification limits due to material's quality uncertainty. Especially if the mean moves toward the upper limit, a half or more of the binder grade will be overlapped with the upper binder grade. Therefore, KS penetration specification should be immediately modified by statistically valid methodologies.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.838-843
• /
• 2002

The objectives of this study were to examine growth performance and meat quality by three different feeding patterns in Korean native cattle (KNC). In each of 3 years, fifteen KNC were randomly assigned in a (3 feeding management)${\times}$(3 sex) factorial design experiment; thus, in total, there were 5 animals in each of the 9 treatments. The three feeding management treatments were longterm (24 month) restriction feeding (LTFR), long-term restriction feeding-hormone implant (LTFR-tH), and short-term (18 month) nonrestriction feeding (STFNR). Three sexes were bull, steer, and heifer. Concentrate diet was fed restriction-feeding method based on body weight in LTFR and LTFR-tH. However, the diet was fed ad libitum in STFNR. Hormonal implantation was made three times with M-$PO^{TM}$ for bulls and with F-$TO^{TM}$ for heifers at 18, 20, 22 month of age in LTFR-tH. Animal were purchased from the local cattle market and managed in two local farms and at the university research unit. Animals were slaughtered at 24 months for long-term trial and at 18 month for short-term trial. The growth rate was the highest in bulls and the lowest in heifers. However, the differences were diminished in F-$TO^{TM}$ implanted heifers. The average daily gain was high in STFNR due to ad libitum feeding. The carcass grade was similar among the treatments on percentage bases. Hormonal implants improved significantly the meat quality grade in all sexes. Castration increased body fat content and improved meat quality grade by intramuscular fat deposition. In conclusion, long-term feeding and hormone treatment increased meat quality grade more than short-term feeding. However, ADG was higher in the short-term trial although feedefficiency was lower.

• Journal of Mushroom
• /
• v.4 no.4
• /
• pp.129-134
• /
• 2006

In order to make the objective quality standard of Pleurotus eryngii, we statistically analysed fruit body collected by the type of market with our own mushroom research lab's quality standard and suggested the quality standard of Pleurotus eryngii by grade. Namely, premium(extra large), first(large), second(middle), and third grade(small) fruit body were 120~130, 110~120 below, 80~110below, and 80mm and below, respectively in height. The diameters of stipe of each grades were 40~45, 30~40below, 25~30below, 25mm below, respectively. The standard of the diameter of pileus indicated ratio of the diameter of pileus/the diameter of stipe instead of the diameter of pileus only because a quality is depend on a ratio of pileus/stipe. The premium and first grade of a ratio of pileus/stipe were 1.6 below and 1.7and below respectively. The weights of premium(extra large), first(large), second(middle), and third grade(small) fruit body were 95~120, 70~95below, 50~70below, 50g below, respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.315-326
• /
• 1996

An experiment was carried out to determine effect of cultivar, drying agent concentration and preservative on the moisture content, temperature and quality changes of fall harvested oat(Avena sativa L.) hay during field curing and storage. The main plots consisted of the cultivar such as 'Foothill' and 'Swan', the subplots consisted of drying agent concentration such as 7Skg/ha(C1), lOSkglha(C2) and control(C0) and the sub-subplots consisted of preservative such as buffered acid(BA), lactic bacteria inoculant(LB) and control(C0). Moisture contents of 'Foothill' and 'Swan' oat cultivar at harvest were 635.5 and 385.4%DW(Dry weight), respectively, but the final moisture contents of the oat cultivars were 117 and 86%DW. The moisture content of cut oat was not affeded by drying agent concentration. Core temperature of baled 'Swan' oat hay was a little higher than that of 'Foothill' and no consistent preservative effect was found. Total nitrogen content of 'Swan' oat hay was 3.08% and that of 'Foothill' oat hay was 3.45%(P<0.05). Drying agent treatment increased total nitrogen content of 'Swan'(P <0.05), but preservative had no effect. Crude fiber content of oat cultivar was increased as the curing progressed(P<0.05) and the difference of crude fiber content of oat cultivar was maintained through the whole curing period. Effect of drying agent concentration on crude fiber content was not found after preservation. Crude fiber content of 'Swan' oat hay was higher than that of 'Foothill' by 1.O% in ADF and 3.1 % in NDF(P<0.05). No preservative effect was found in crude fiber content. According to RFV of oat cultivar at harvest, forage quality of 'Foothill' and 'Swan' was Prime and Grade 1, respectively, but that of both cultivm was above Grade 2 at the final curing day. RFV of the stored 'Foothill' and 'Swan' oat hay was 122 and 114(P<0.05), respectively, and the quality of oat hay was classified as Grade 1 and 2, respectively, according to the forage quality standard assigned by AFGC.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.359-369
• /
• 2011

The study was carried out to investigate the quality characteristics of pellets manufactured with adding soybean oil, waste soybean oil, ozonized soybean oil and ozonized waste soybean oil to Larix kaemferi Carr sawdust. The characteristics of pellet included moisture contents, heating value, ash contents, apparent densities, durabilities, absorption ratio and elementary analysis. Moisture contents were shown 7.66~9.48% which satisfied the first grade (less than 10%) of quality standard of wood pellets announced by Korea Forest Research Institute. The heating value of the manufactured wood pellets in this study exceeded the first grade of quality standard (more than 4,300 kcal/kg) and it appeared that the pellets manufactured with adding oils and ozonized oils had more heating value than the control pellets. Ash contents 0.34~0.42% also passed the first grade (less than 0.7%) of quality standard and apparent densities were adequate for the first grade (640 kg/$m^3$) on the quality standard. Durabilities of the pellets manufactured with adding soybean oil and ozonized waste soybean oil were shown over the first grade (97.5 kg/$m^3$) of quality standard. In the general results of durabilities, the pellets manufactured with additives had better values than the control pellets. After 24 hours absorption ratio experiment, absorption ratio of pellets manufactured with additives also appeared much lower moisture absorption than the control pellets and they still had the same results after 5days absorption ratio experiment. Elementary analysis of the sulfur content was satisfied the first grade (less than 0.05%) of quality standard of wood pellets and the nitrogen content was also adequate for the first grade (less than 0.3%) of quality standard of wood pellets.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.287-294
• /
• 2005

In Korea an Internet Home Tax Service has started from the year of 2000 with a value added tax system and has been expanded to a corporate income tax and an individual income tax in 2004. Therefore most of the important tax items have been systemized with Home Tax Service. In this paper, 9 variables which contain 41 issues are used to testify a tax payer satisfaction grade. Those 9 variables include quality of system, quality of information, legislative area, systematic area, mental area, user satisfaction, effectiveness of the information projects, and tax compliance grade.

• Journal of Animal Science and Technology
• /
• v.59 no.3
• /
• pp.6.1-6.6
• /
• 2017

Background: This study was aim to observe the effects of feeding mixed local hay (MH) consisted of 55% orchard grass (Dactylis glomerata L.), 35% tall fescue (Festuca arundinacea) and 10% red clover (Trifolium pratense) to Hanwoo steers on performance, carcass characteristics and meat quality (longissimus thoracis) compared with feeding imported timothy hay (TH) and local rice straw (RS). Results: Although no significant effects were found on animal performance and carcass yield grade, the carcasses of MH group had higher marbling score and quality grade than those of RS and TH group (P < 0.05). Therefore, higher fat content (P < 0.001), lower shear force and hardness value in the beef of MH group than that of other groups were observed. Furthermore, the beef of MH group had higher CIE $a^*$ value (redness) than that of other groups and feeding MH to Hanwoo steers lowered n-6 to n-3 fatty acids ratio in beef. Conclusions: Mixed hay provided benefits on meat quality and could be used for Hanwoo fattening program.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.4
• /
• pp.99-111
• /
• 1994

Toguchi method is a systematic technique for designing high quality product at low cost. There are three steps in the Toguchi method, 1)system design, 2)parameter design, and 3)tolerance design. This paper considers the tolerance design for multiple performance characteristics which is practically important. We present two tolerance design procedures : grade selection and tolerance determining procedures. In grade selection procedure a scheme is presented that minimizes the sum of the price of low-level characteristics and the expected loss due to the variations of high-level characteristics. In tolerance determining procedure we determine the tolerances of the low-level characteristics.

• Journal of Ginseng Research
• /
• v.17 no.3
• /
• pp.219-223
• /
• 1993

Assessment of root weight grade system for the numeral definition in Korea ginseng was tried by investigation of 13 boxes of the 15-root-grade of 4-year-old white ginseng as a model. In this case satisfaction to theoretical value was 58% in root weight and 50% in root number. The coefficient of variation (CV) was high (35%) for individual root weight in package. The CV of tap root weight 1 among package is low (7.1%) even though there was no significant correlation between tap root weight : and lateral root weight among roots. The mean percentage of tap root to root weight in each package ranged 61 to 74% with CV range of 16.5 to 33.2%. The CV was not much different between 1st and 2nd lateral root weight and the means was above 60%. Strict practice of numeral definition of root weight grade system will be prerequisite for chemical standardization of Korea ginseng.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1202-1208
• /
• 2020

Objective: The aim of this study was to identify a distribution pattern of meat quality grade (MQG) as a function of carcass yield index (CYI) and the gender of Hanwoo (bull, cow, and steer) to determine the optimum point between both yield and quality. We also attempted to identify how pre- and post-deboning variables affect the gender-specific beef quality of Hanwoo. Methods: A total of 31 deboning variables, consisting of 7 pre-deboning and 24 post-deboning variables from bulls (n = 139), cows (n = 69), and steers (n = 153), were obtained from the National Institute of Animal Science (NIAS) in South Korea. The database was reconstructed to be suitable for a statistical significance test between the CYI and the MQG as well as classification of meat quality. Discriminant function analysis was used for classifying MQG using the deboning parameters of Hanwoo by gender. Results: The means of CYI according to 1+, 1, 2, and 3 of MQG were 68.64±2.02, 68.85±1.94, 68.62±5.88, and 70.99±3.32, respectively. High carcass yield correlated with low-quality grade, while high-quality meat most frequently was obtained from steers. The classification ability of pre-deboning parameters was higher than that of post-deboning parameters. Moisture and the shear force were the common significant parameters in all discriminant functions having a classification accuracy of 80.6%, 71%, and 56.9% for the bull, cow, and steer, respectively. Conclusion: This study provides basic information for predicting the meat quality by gender using pre-deboning variables consistent with the actual grading index.