• The Journal of the Korea Contents Association
• /
• v.5 no.4
• /
• pp.254-264
• /
• 2005

In this paper, an advanced E-Model was proposed in order to overcome disadvantages of conventional method. A new model makes the accurate VoIP call quality assessment possible by applying the burst packet loss and recency effect. In order to assess the performance of this advanced E-Model, we gained the estimated MOS value from NR(Network R) value and UR(User R) value resulted from the burst packet loss values by Gilbert Model. Through simulations and comparisons with conventional models such as MOS, PESQ, and I-Model, we reach a conclusion that advanced E-Model is more accurate and reliable method than conventional models.

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.111-123
• /
• 2017

The phycocyanin pigment (PC) is a marker for cyanobacterial presence in eutrophic inland water. Accurate estimation of low PC concentration in turbid inland water is challenging due to the optical complexity and criticalforissuing an early warning of potentialrisks of cyanobacterial bloom to the public. To monitor cyanobacterial bloom in eutrophic inland waters, an approach is proposed to partition non-water absorption coefficient from measured reflectance and to retrieve absorption coefficient of PC with the aim of improving the accuracy in remotely estimated PC, in particular for low concentrations. The proposed inversion model retrieves absorption spectra of PC ($a_{pc}({\lambda})$) with $R^2{\geq}0.8$ for $a_{pc}(620)$. The algorithm achieved more accurate Chl-a and PC estimation with $0.71{\leq}R^2{\leq}0.85$, relative root mean square error (rRMSE) ${\leq}39.4%$ and mean relative error(RE) ${\leq}78.0%$ than the widely used semi-empirical algorithm for the same dataset. In particular, low PC ($PC{\leq}50mg/m^3$) and low PC: Chl-a ratio values of for all datasets used in this study were well predicted by the proposed algorithm.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.623-635
• /
• 2013

Purpose: The recent major recalls of hazardous products caused consumer product safety acts to be strengthen worldwide. Although the recall system of hazardous products in Korea has been operating based on Framework Act on Product Safety since 2011, the evaluation of product risk has been relied on not the results of objective incident data but the results of illegal product investigations. The purpose of this paper is to propose a product risk assessment model for Korea using injury data. Methods: The authors derived Korea's risk assessment method by analysing the advantages and disadvantages of the most widely used models in advanced countries such as EU's RAPEX RAG and Janpan's R-MAP. In this study, the level of relative frequency and severity of injury are determined based on the objective incident data and the length of hospitalization respectively. In addition, the injury data occurred during 2011 is applied to the proposed risk assessment model for case study. Results: The data analysed in this paper can be classified as high risk, medium risk, low risk, acceptable risk, and safe products through the matrix f rom the combination of the relative frequency and the severity derived. Conclusion: The proposed risk assessment model in this study has advantage obtaining reliable objective results because it uses actual injury data and redeems the drawbacks of the existing models used in advanced countries. Furthermore, because the proposed model shows the high risk products among many, it is expected to be useful especially for customs whose main job is inspecting the imported goods and the government when selecting the target product groups for safety investigation.

• Journal of Chest Surgery
• /
• v.49 no.sup1
• /
• pp.28-36
• /
• 2016

Background: This study aimed to develop the models for regional cardiac surgery centers, which take regional characteristics into consideration, as a policy measure that could alleviate the concentration of cardiac surgery in the metropolitan area and enhance the accessibility for patients who reside in the regions. Methods: To develop the models and set standards for the necessary personnel and facilities for the initial management plan, we held workshops, debates, and conference meetings with various experts. Results: After partitioning the plan into two parts (the operational autonomy and the functional comprehensiveness), three models were developed: the 'independent regional cardiac surgery center' model, the 'satellite cardiac surgery center within hospitals' model, and the 'extended cardiac surgery department within hospitals' model. Proposals on personnel and facility management for each of the models were also presented. A regional cardiac surgery center model that could be applied to each treatment area was proposed, which was developed based on the anticipated demand for cardiac surgery. The independent model or the satellite model was proposed for Chungcheong, Jeolla, North Gyeongsang, and South Gyeongsang area, where more than 500 cardiac surgeries are performed annually. The extended model was proposed as most effective for the Gangwon and Jeju area, where more than 200 cardiac surgeries are performed annually. Conclusion: The operation of regional cardiac surgery centers with high caliber professionals and quality resources such as optimal equipment and facility size, should enhance regional healthcare accessibility and the quality of cardiac surgery in South Korea.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.101-104
• /
• 2007

Development of performance assessment model of lighting environment is promoting to improve indoor lighting Quality. Therefore, the extraction of performance assessment items of lighting environment must precede a model development. This paper analyzes the certification standards on the Green Building for the extraction\ of assessment items. The purpose of this paper is the extraction of assessment items as fundamental data for the development of performance assessment model of lighting environment.

• Journal of Environmental Impact Assessment
• /
• v.14 no.4
• /
• pp.227-235
• /
• 2005

Source contribution for VOCs collected in Seoul metropolitan area was conducted using PAMs (Photochemical assessment monitoring system) data and CMB(Chemical Mass Balance) model8.0, in order to estimate spatial and temporal variations of VOCs source contribution in that area, and also to compare with corresponding emission inventory. VOCs data used in model calculation were collected at 6 different sites of PAMs(Seokmori, Guwoldong, Simgokdong, Bulgwangdong, Jeongdong and Yangpyeong) and 22 out of 56 VOCs species were analyzed from June 2002 to march 2003 and used for CMB model estimation. The result showed that vehicle exhaust, coating and energy combustion were important sources of VOCs in Seoul metropolitan area, averaging 32.6%, 25.5% and 25.1%, respectively. In this study as well as other references, it was revealed that vehicle exhaust is the main contributor of urban area VOCs, but there is remarkable contrast between emission inventory and model estimation. Vehicle exhaust portion is seriously underestimated while coating is usually overestimated in emission estimates, compared to CMB results. Therefore, it is considered to assert and confirm the uncertainty of emission estimates and clarify the distinction between two other source apportionment methods.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.624-625
• /
• 2005

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.8
• /
• pp.379-384
• /
• 2017

In real software business environment, there are required to validate software quality in diverse usage range of software for many small & medium companies. Software quality means both qualities of production and process. In our situation, we focus on better process quality of a test organization than a whole organization. But even the original test maturity model (TMM) does not enough to apply with our domestic venture/small & medium companies. To solve this problem, we suggest the simplified test maturity model for our companies. We redefine this simplified model with the original TMM and a test process improvement next (TPI next) model. The previous models just have provided each definition of maturity level, goal and activity per each level, which not exists an assessment guideline and a formal assessing procedure. Due to this reasons, an assessor is difficult to assess the test organization without them. this paper suggest an assessment guideline of the simplified TMM and also define the procedure which is included with activities and byproducts. With these assessment guideline, an assessor can work possible to formally assess test organizations of small & medium companies, and with self assessment guideline they can be correctly provision before assessment of their organizations.

• Journal of Environmental Impact Assessment
• /
• v.15 no.3
• /
• pp.193-206
• /
• 2006

Recently, high ozone episode occurred frequently in Korea. Moreover ozone episode occurred not only in the city but also in background area where local anthropogenic sources are not important. It analyzed frequency exceeding 100ppb ozone at air quality monitoring stations in Seoul and rural area during 1995-2004. This paper reports on the use of the Community Multiscale Air Quality (CMAQ) modelling system to predict hourly ozone levels. Domain resolutions of 30km, 10km, 3.333km (innermost) have been employed for this study. Summer periods in June 2004 have been simulated and the predicted results have been compared to data for metropolitan and rural air quality monitoring stations. The model performance has been evaluated with measured data through a range of statistical measures. Although, the CMAQ model reproduces the ozone temporal spatial trends it was not able to simulate the peak magnitudes consistently.

• Journal of Environmental Impact Assessment
• /
• v.21 no.6
• /
• pp.893-901
• /
• 2012

Aircraft noise model such as FAA Integrated Noise Model(INM) has recently been used for forecasting the impact of noise in a residential area near an airport and quantifying the effect of various options for noise mitigation. The noise modeling should be reliable and precise in order to ensure the quality of the results provided. In this study, the validation of the noise levels simulated by the INM against measurement data recorded continuously at multiple monitoring sites was discussed. As a result of validation, the quality of the input data used as a fixed point profiles for the INM was enhanced. The noise contour maps were designed as a way to evaluate the aircraft noise of the vicinity of the airfield. The results of this study indicate that the validation of aircraft noise model by the measurement data would be required for the accurate assessment of the aircraft noise levels.