• Journal of Environmental Impact Assessment
• /
• v.6 no.1
• /
• pp.93-103
• /
• 1997

LHR(Landfill Site Hazard Ranking Model) was developed for ranking the relative hazard of landfill sites by using the method of value-structured approach. LHR consists of combining a multiattribute decision-making method with a Qualitative risk assessment approach. A pairwise com parisian method was applied to determine weights of landfill site factors related. To determine the hazard of landfill site, hydrogeological factors, waste characteristics factors and receptors factors were evaluated by LHR. LHR can help decision-makers prioritization of remediation of landfill sites through the relatively convenient and concise evaluation method of landfill site features related. LHR focuses mainly on pathways of groundwater and surfacewater for evaluating landfill hazard to receptors including humans. To validiate the applicability of LHR, Nanjido Landfill site, Metropolitan Landfill site, and Hwasung Landfill site were evaluated.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.37-41
• /
• 2018

Process safety technology has developed from qualitative methods such as HAZOP (hazard and operability study) to semi-quantitative methods such as LOPA (layer of protection analysis), and quantitative methods are actively studied these days. Quantitative risk assessment (QRA) is often based on fault tree analysis (FTA). FTA is efficient, but difficult to apply when failure events are not independent of each other. This problem can be avoided using a Markov process (MP). MP requires definition of all possible states, and thus, generally, is more complicated than FTA. A method is proposed in this work that uses an MP model and a Weibull distribution model in order to construct a reliability model for multiple dependent failures. As a case study, a pressure safety valve (PSV) is considered, for which there are three kinds of failure, i.e. open failure, close failure, and gas tight failure. According to recently reported inspection results, open failure and close failure are dependent on each other. A reliability model for a PSV group is proposed in this work that is to reproduce these results. It is expected that the application of the proposed method can be expanded to QRA of various systems that have partially dependent multiple failure states.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.82-96
• /
• 2019

Objective: The aims of this study were to provide the basic data for establishing a precautionary management policy and to develop a methodology for selecting a radon management priority target area suitable for the Korean domestic environment. Methods: A suitable mapping method for the domestic environment was derived by conducting a quantitative comparison of predicted values and measured values that were calculated through implementation of two models such as IDW and RBF methods. And a qualitative comparison including the clarity of information transmission of the written radon map was carried out. Results: The predicted and measured values were obtained through the implementation of the spatial analysis models. The IDW method showed the lowest in the calculated mean square error and had a higher correlation coefficient than the other methods. As results of comparing the uncertainty using the jackknife concept and the concept of error distance for comparison of the differences according to the model interpolation method, the sum of the error distances showed a modest increase compared with the RBF method. As a result of qualitatively comparing the information transfer clarity between the radon maps prepared with the predicted values through the model implementation, it was found that the maps plotted using the predicted values by the implementation of the IDW method had greater clarity in terms of highness and lowness of radon concentration per area compared with the maps plotted by other methods. Conclusions: The radon management priority area suggests selecting a metropolitan city including an area with a high radon concentration.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.13-18
• /
• 2006

The fire protection regulation for the nuclear power plants is based on the qualitative fire hazard assessment and the quantitative fire risk analysis, and the fire risk is managed by the fire protection plan with the appropriate balance among the fire prevention, fire suppression and the minimization of the fire effect. In these days, the zone model or the field model is generally used for the detail evaluation for the fire risk. At this paper, with consideration of the present trend, we evaluate whether the quantitative fire risk analysis and the assessment of fire result for fire areas at nuclear power plants can be possible by use of Fire Dynamics Simulator (FDS) that is the state-of-the-art fire modeling tool. Consequently, it is expected that the quantitative fire risk evaluation propelled by the fire modeling can be available as an applicable tool to improve the core damage frequency as well as the quantitative fire risk analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4531-4544
• /
• 2021

Because the traditional network information security vulnerability risk assessment method does not set the weight, it is easy for security personnel to fail to evaluate the value of information security vulnerability risk according to the calculation value of network centrality, resulting in poor evaluation effect. Therefore, based on the network security data element feature system, this study designed a quantitative assessment method of network information security vulnerability detection risk under single transmission state. In the case of single transmission state, the multi-dimensional analysis of network information security vulnerability is carried out by using the analysis model. On this basis, the weight is set, and the intrinsic attribute value of information security vulnerability is quantified by using the qualitative method. In order to comprehensively evaluate information security vulnerability, the efficacy coefficient method is used to transform information security vulnerability associated risk, and the information security vulnerability risk value is obtained, so as to realize the quantitative evaluation of network information security vulnerability detection under single transmission state. The calculated values of network centrality of the traditional method and the proposed method are tested respectively, and the evaluation of the two methods is evaluated according to the calculated results. The experimental results show that the proposed method can be used to calculate the network centrality value in the complex information security vulnerability space network, and the output evaluation result has a high signal-to-noise ratio, and the evaluation effect is obviously better than the traditional method.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.66-74
• /
• 2024

This study addresses the escalating issue of worldwide hydrogen gas accidents, which has seen a significant increase in occurrences. To comprehensively evaluate the risks associated with hydrogen, a two approach was employed in this study. Firstly, a qualitative risk assessment was conducted using the bow-tie method. Secondly, a quantitative consequence analysis was carried out utilizing the areal locations of hazardous atmospheres (ALOHA) model. The study applied this method to two incidents, the hydrogen explosion accident occurred at the Muskingum River power plant in Ohio, USA, 2007 and the hydrogen storage tank explosion accident occurred at the K Technopark water electrolysis system in Korea, 2019. The results of the risk assessments revealed critical issues such as deterioration of gas pipe, human errors in incident response and the omission of important gas cleaning facility. By analyzing the cause of accidents and assessing risks quantitatively, the effective accident response plans are proposed and the effectiveness is evaluated by comparing the effective distance obtained by ALOHA simulation. Notably, the implementation of these measures led to a significant 54.5% reduction in the risk degree of potential explosions compared to the existing risk levels.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.05a
• /
• pp.166-166
• /
• 2003

In terms of the risk assessment, qualitative and quantitative informations are needed to estimate the exposures of environmental pollutants, which may be potentiality of risks, and those are the information about the changes caused by the chemical transportation among environmental media and transformation in environmental media by duration. The various fate mechanism of chemical is possible for estimation of chemical concentration in environmental media. Since there are limitations in measuring the change of chemical concentration within all medium according to the time period, estimating method through modeling are developed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1179-1189
• /
• 2019

Cyber security evaluation is a series of processes that estimate the level of risk of assets and systems through asset analysis, threat analysis and vulnerability analysis and apply appropriate security measures. In order to prepare for increasing cyber attacks, systematic cyber security evaluation is required. Various indicators for measuring cyber security level such as CWSS and CVSS have been developed, but the quantitative method to apply appropriate security measures according to the risk priority through the standardized security evaluation result is insufficient. It is needed that an Scoring system taking into consideration the characteristics of the target assets, the applied environment, and the impact on the assets. In this paper, we propose a quantitative risk assessment model based on the analysis of existing cyber security scoring system and a method for quantification of assessment factors to apply to the established model. The level of qualitative attribute elements required for cyber security evaluation is expressed as a value through security requirement weight by AHP, threat influence, and vulnerability element applying probability. It is expected that the standardized cyber security evaluation system will be established by supplementing the limitations of the quantitative method of applying the statistical data through the proposed method.

• Korean Journal of Occupational Health Nursing
• /
• v.27 no.4
• /
• pp.235-246
• /
• 2018

Purpose: This study aimed to comprehend the real context of metabolic syndrome-related factors of Korean male blue-collar workers from small-sized companies based on the health belief model. Methods: A total of 37 workers from three companies were interviewed, and three series of focus group interviews were conducted. Data were analyzed using deductive content analysis. Results: Data were classified into four categories: knowledge, perceived susceptibility and severity, perceived barriers, and beliefs. Knowledge referred to low knowledge level; perceived susceptibility and severity referred to unawareness of susceptibility and severity; perceived barriers referred to shift work, overtime work, and a social context including having no choice but to drink; and beliefs referred to believing that health promotion behaviors do not relate to preventing metabolic syndrome, believing that one cannot prevent metabolic syndrome oneself, and believing that professional help is required. Conclusion: To prevent and reduce the risk of metabolic syndrome among Korean male blue-collar workers, interventions should focus on strategies to increase metabolic syndrome-related knowledge and perceptions, social support, and self-efficacy for practicing health behaviors. In addition, it is necessary to develop policies for establishing a healthy drinking culture in companies.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.51-59
• /
• 1997

These days leakage incidents of toxic materials cause serious effects on the nearby residents as well as the workers around the accidents accompanying massive material losses and human damages through widening influential areas. The risk measure through adequate quantitative analysis as well as the qualitative analysis of the leakage incidents of toxic materials becomes an urgent issue. The damage of the leakage incident on the surrounding area of the dangerous toxic material facilities was calculated quantitatively by adopting several models in this research. First, the calculations of the leakage velocity from the factories were performed by using source model for the assessment of the influential area, and the damages on the nearly residents were calculated by using the dispersion model and the effort model. The probability of the Incidents was computed based on "The manual for classification and priorization of major incidents" published by IAEA( International Atomic Energy Agency ). Above calculated damage area and incident probability were further adopted in this study to induce the individual and societal risk, quantitatively. The calculated data of the real Incident of the toxic material leakage showed reasonable agreements to the actual damage of the incidents, which showed a validity of this study. The result of this study might be a helpful measure for predicting damages and preparing safety systems for similar kinds of incidents.incidents.