• Management & Information Systems Review
• /
• v.9
• /
• pp.1-23
• /
• 2002

The Information System is now becoming a very important part of our livers. It encompasses technical and spactial characteristics that are much more different from the order information systems used up until now. Therefore, as various fields within the Information Center are researched, the proper usage of those fields must be well thought-out. This study presents the application of quality management systems in Library, Korea. The purpose of this study is to build a framework of improving the management system and planning and performing the service of high quality in Library. To achieve this goal, a theoretical approach was tried through the previous study and the performed with the subject of the 4 steps by Damming' quality management theory. This study may enable domestic organizations to draw up a concrete and practical plan in Library.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.3
• /
• pp.639-650
• /
• 2005

Theoretical and numerical comparison have shown that variable sampling interval (VSI) charts are substantially more efficient than fixed sampling interval(FSI) charts in term of ATS(average time to signal). But the frequency of switching between different sampling intervals is a complicating factor in VSI procedures. VSI EWMA charts for monitoring mean vector of related qualify characteristics are investigated. To compare the efficiencies of the proposed charts, the performances are evaluated for matched FSI and VSI charts in terms of average time to signal(ATS) and average number of samples to signal(ANSS). For the switching behavior of the proposed VSI charts, average number of switches(ANSW) are also investigated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.347-353
• /
• 2004

Due to various advantages over the conventional linear motion device such as ball-screw, linear motors have been used in wide variety of industrial applications for years. Driven by increased demand for precision machine tools, the importance of high positioning accuracy, high stiffness and high thrust are greatly increasing. The merits of linear motor are high speed high acceleration and good positioning accuracy. In addiction, Linear motor for high qualify machine tool call for high thrust, high stiffness. In this paper, thrust ripple, detent force and thermal behavior are considered for the development of high performance linear motor whose thrust is up to 1,900N. This paper presents a comprehensive study for an iron core type linear motor characteristics that include the influence of PM position on thrust ripple by detent force and motor dynamics as well.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.2 s.23
• /
• pp.14-20
• /
• 2004

In this study, the overall performance and the local flow field of the centrifugal compressor with the refrigerant HFC-l34a were numerically studied using CFX-TASCflow. The thermodynamic and transport properties of the refrigerant gas were modeled by REFPROP which is NIST refrigerant properties database. The impacts of a grid qualify, discretization scheme, turbulent model and interaction between a impeller and a cascade diffuser were analyzed comparatively. The results were compared with experimental data and 1-D design results using COMPAL and agreed well with others. The numerical method and data obtained in this study can be applied to the design and modification of centrifugal compressors with real gases

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.45-48
• /
• 2005

This study is basic experiment for estimating influence of strength by curing temperature of concrete's heat of hydration and estimate relationship of compressive strength development by initial curing temperature factor, and then asume temperature factor which influence compressive strength development and for showing basic document of qualify control. According to the result of cement mortar by the curing temperature factor high-curing temperature shows high strength on 3 day compare with low curing-temperature, shows higher strength than the piece of high curing temperature.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.79-86
• /
• 2004

This paper has presented to the design results of the analog and digital signal processor for the 2nd generation thermal imaging system using $480\times6$ infrared focal plane array In order to correct non-uniformities of detector arrays, we have developed the 2-point correction method using the thermo electric cooler. Additionally, to enhance the image of low contrast and improve the detection capability, we developed the new technique of histogram processing being suitable for the characteristics of contrast distribution of thermal imagery. Through these image processing techniques, we obtained a high qualify thermal image and acquired good result.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.318-320
• /
• 2006

A control valve with deadband characteristics influences on the control dynamics. A control loop with deadband component shows cyclic control results and causes the wears of mechanical parts. A valve on the important process that require nonstop operation cannot be improved during operation. In case of control loops with deadband dynamics, the optimal control parameters based on the performance only are not sure of the good operation in point of protecting the control component. To improve the control performance and control oscillation, the control parameters should be changed to meet both control qualify and protection of control components.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.230-233
• /
• 2005

This paper proposes power qualify assessment using Markov Chain applied to Ergodic theorem. The Ergodic theorem introduces the state of aperiodic, recurrent, and non-null. The proposed method using Markov Chain presents very well generated harmonic characteristics according to the traction's operation of electric railway system. In case of infinite iteration, the characteristic of Markov Chain that converges on limiting probability Is able to expected harmonic currents posterior transient state. TDD(Total Demand Distortion) is also analyzed in expected current of each harmonic. The TDD for power quality assesment is calculated using Markov Chain theory in the Inceon international airport IAT power system.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.1-4
• /
• 2015

Qualification includes all activities to demonstrate that a product meets and exceeds the reliability goals. Manufacturers need to spend time and resources for the qualification processes under the pressure of reducing time to market, as well as offering a competitive price. Failure to qualify a product could result in economic loss such as warranty and recall claims and the manufacturer could lose the reputation in the market. In order to provide valid and reliable qualification results, manufacturers are required to make extra effort based on the operational and environmental characteristics of the product. This paper discusses optimal interval censoring design for reliability prediction of electronic packages under limited time and resources. This design should provide more accurate assessment of package capability and thus deliver better reliability prediction.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.49-54
• /
• 2004

Recently residential-commercial buildings are being built more like residential-oriented apartments and also as deluxe residential houses targeting at the high-income bracket that is seeking for high Qualify of life. The important factors to provide a pleasant environment for residential-commercial buildings are both common space shared by occupants and the quality of service and the conveniences. These have already become prominent as important factors when choosing a residence. This research manipulates the characteristics of commonly shared space, being an important factor of amenity, in the residential-commercial buildings recently built for sale so that a reference to planning of common space in residential-commercial buildings can be provided for the future.