• 마이크로전자및패키징학회지
• /
• 제20권3호
• /
• pp.59-62
• /
• 2013

Plastic ball grid array (PBGA)에 대한 강력한 임의 진동에서의 신뢰성을 실험적으로 검증하였다. 실험시편을 만들기 위해 데이지 체인이 형성된 PCB에 칩을 실장시킨 후 그중 절반은 underfill 공정을 거쳤다. 임의 진동 프로파일은 인공위성 전자장비의 신뢰성 검증에서 사용되는 두 종류의 진동 수준, 즉 판정시험 (acceptance level) 및 합격시험(qualification level)을 사용하였으며 각각의 power spectrum density는 22.7 Grms와 32.1 Grms였다. 실험후 underfill과 관계없이 모든 샘플에서 솔더의 균열이 발생되지 않았으며, 차후 항공 및 우주용 전자장비를 대치할 수 있는 패키징 구조의 가능성을 보여 줬다.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.683-691
• /
• 2011

원자력발전소 용 솔레노이드 밸브의 국산화에 필수 과정인 기기검증 기술을 개발하기 위해 관련 규정을 분석하고, 시험절차 및 방법, 시험조건, 시험장치 및 허용기준 등을 구체화하였다. 솔레노이드 밸브의 기기검증 규격은 법규, 가이드, 규정 등의 순으로 계층화되어 있으며, 시험기기와 시험항목에 따라 규정이 세분화되어 있다. 세부 규정인 IEEE를 분석한 결과 기기검증 시험은 크게 기능시험, 일반환경시험 및 사고시험으로 구분되어 있는데, 일반환경시험과 사고시험을 통해 발전소 환경과 동일한 조건에서 솔레노이드 밸브를 노화시킨 후 기능시험에서 노화된 밸브의 성능을 확인하는 방식으로 검증시험을 수행하도록 구성되어 있었다. 본 논문에서 제시한 솔레노이드 밸브의 기기검증 시험절차와 방법은 기기검증 수행자뿐만 아니라 밸브 제조사에게 매우 유용한 기술 자료가 될 것으로 판단된다.

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.686-696
• /
• 2017

본 연구에서는 3U 큐브위성의 표준 플랫폼을 기반으로 한누리 5호 위성을 개발하고 이를 검증하였다. 표준 플랫폼의 기계시스템 설계에서는 초소형 부품 및 서브시스템 기능/성능을 초소형 PCB에 집적 및 소형화하도록 하고, 다양한 탑재체를 수용하도록 전기적 능력을 극대화한다. 한누리 5호는 지구저궤도(LEO)에서 운용하는 3U 크기의 큐브위성으로 적외선 카메라를 이용한 지구관측임무와 가이거뮬러 튜브로 우주방사선 측정을 하는 과학임무를 수행한다. 또한, 자체 개발한 소형 가변속제어모멘트자이로(VSCMG)와 퍼지로직 기반의 MPPT (Maximum Power Point Tracking) 등의 부품(장치)들에 대한 기술검증도 포함한다. 한누리 5호의 검증을 위해 한누리 5호 위성체계의 ETB 시험, 기능시험 및 인증(Qualification)과 인수(Acceptance) 수준의 환경시험을 수행하였고 이들 시험결과를 제시하였다.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.74-96
• /
• 2002

The objectives of this study is to suggest the rectifying sampling inspection plan considering quality cost. Limiting quality level(LQL) plans(also called LTPD plans) and outgoing quality(OQ) plans are considered. The Hald's linear cost model is discussed with and without a beta prior for the distribution of the fraction of nonconforming items in a lot. It is assumed that the sampling inspection is error free. We consider the design of reliability acceptance sampling plan (RASP) for failure rate level qualification at selected confidence level. The lifetime distribution of products is assumed to be exponential. MIL-STD-690C and K C 6032 standards provide this procedures. But these procedures have some questions to apply in the field. The cost of test and confidence level(1-$\beta$ risk) are the problem between supplier and user. So, we suggest that the optimal life test sampling inspection plans using simple linear cost model considering product cost, capability of environment chamber, environmental test cost, and etc. Especially, we consider a reliability of lots that contain some nonconforming items. In this case we assumed that a nonconforming item fail after environmental life test. Finally, we develope the algorithm of the optimal sampling inspection plan based on minimum costs for rectifying inspection and RASP. And computer application programs are developed So, it is shown how the desired sampling plan can be easily found.

• Composites Research
• /
• 제19권2호
• /
• pp.1-6
• /
• 2006

복합재료를 사용하여 우주항공 부품을 설계할 때 국내는 물론, 미국을 비롯한 우주항공선진국의 감항규정에서 민간과 군용 모두 통계적으로 산출된 값을 사용할 것을 요구하고 있다. 그러나 이 기준을 만족하기 위해서는 방대한 데이터베이스가 필요하여 시험 비용 및 시간이 큰 문제가 되어왔다. 최근 미국 NASA/FAA에서 시험 개수를 줄이면서 동시에 통계적 기준을 만족할 수 있는 새로운 설계허용값 산출방법을 AGATE 프로그램을 통해서 개발하였다. 특히 이미 인증된 재료를 다른 사업에 사용하기 위해서 사용할 수 있는 재료동등성 시험(Material Equivalency Test)은 국내의 사업에 직접 적용할 수 있는 중요한 개념이다. 본 논문에서는 국내에서 사용하고 있는 복합재료의 특성을 공유하여 비용을 절감하고 재료특성을 정확히 관리할 목적으로 재료 동등성 및 수락시험 절차를 설명하고, 예로서 국내에서 개발한 고온용 탄소복합재료의 설계허용값을 산출하였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.163-166
• /
• 2003

This paper presents the results of a series of performance tests for the Stilting cryocooler. Infrared sensor systems incorporating cryocoolers are required to be qualified to the appropriate environmental specification. Linear drive Stilting cryocooler have matured to the stage of undergoing formal qualification test program The thermal environmental test of the Stilting cryocooler is presented in this paper. We performed that low and high temperature keeping test from －4$0^{\circ}C$ to ＋6$0^{\circ}C$ and operating test at high and low temperature cyclic range with acceptance tests performed at scheduled intervals. Cooling capacity was determined as a function of cooler components temperatures at the compressor, hot end and cold tip. Tests performed on this cooler have been successful with a measured cooling performance of more than 0.8W＠80K for 23$^{\circ}C$ ambient temperature with 40 $W_{ac}$ input power.

• 대한산업공학회지
• /
• 제43권2호
• /
• pp.147-153
• /
• 2017

In order to demonstrate a target reliability with a specified confidence level, a new two-stage Bayesian Reliability Demonstration Test (RDT) plans that is known to be more effective than a corresponding single-stage one is proposed and developed by Bayesian framework with beta prior distribution for Weibull life time distribution. A numerical example is provided to illustrate the proposed RDT plans and compared with other non-Bayesian and Bayesian plans. Comparative results show that the proposed Bayesian two-stage plans have some merits in terms of required and expected testing time and probability of acceptance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1953-1958
• /
• 2007

This paper presents the results of a series of performance tests for the integral Stirling cryocooler. Infrared sensor systems incorporating cryocoolers are required to be qualified to the appropriate environmental specification. Integral Stirling cryocooler for thermal imaging system have matured to the stage of undergoing formal qualification test program. The thermal environmental test of the Stirling cryocooler is presented in this paper. We performed that low and high temperature keeping test from $-40^{\circ}C$ to $+71^{\circ}C$ and operating test at high and low temperature cyclic range with acceptance tests performed at scheduled intervals. Cooldown time to 80K and steady state input power at 80K were determined as a function of cooler components temperatures at the compressor, hot end and cold tip. Tests performed on this cooler have been successful with a measured cooldown time to 80K of less than 5 minutes 24seconds for $71^{\circ}C$ ambient temperature with input power of 11W

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2195-2205
• /
• 2023

One of the salient nuclear fuel performance parameters for new fuel types under development is changes in fuel thickness. To test the new commercially fabricated U-10Mo monolithic plate-type fuel, an irradiation experiment was designed that consisted of multiple mini-plate capsules distributed within the Advanced Test Reactor (ATR) core, the mini-plate 1 (MP-1) experiment. Each capsule contains eight mini-plates that were either fueled or "dummy" plates. Fuel thickness changes within a fuel assembly can be characterized by measuring the gaps between the plates ultrasonically. The channel gap probe (CGP) system is designed to measure the gaps between the plates and will provide information that supports qualification of U-10Mo monolithic fuel. This study will discuss the design and the results from the use of a custom-designed CGP system for characterizing the gaps between mini-plates within the MP-1 capsules. To ensure accurate and repeatable data, acceptance and calibration procedures have been developed. Unfortunately, there is no "gold" standard measurement to compare to CGP measurements. An effort was made to use plate thickness obtained from post-irradiation measurements to derive channel gap estimates for comparison with the CGP characterization.

• Journal of Radiation Protection and Research
• /
• 제41권4호
• /
• pp.384-388
• /
• 2016

Background: For a verification of newly-developed neutron absorbers, one of guidelines on the qualification and acceptance of neutron absorbers is the neutron attenuation test. However, this approach can cause a problem for the qualifications that it cannot distinguish how the neutron attenuates from materials. Materials and Methods: In this study, an estimation method of neutron absorption performances for materials is proposed to detect both direct penetration and back-scattering neutrons. For the verification of the proposed method, MCNP simulations with the experimental system designed in this study were pursued using the polyethylene, iron, normal glass and the vitrified form. Results and Discussion: The results show that it can easily test neutron absorption ability using single absorber model. Also, from simulation results of single absorber and double absorbers model, it is verified that the proposed method can evaluate not only the direct thermal neutrons passing through materials, but also the scattered neutrons reflected to the materials. Therefore, the neutron absorption performances can be accurately estimated using the proposed method comparing with the conventional neutron attenuation test. Conclusion: It is expected that the proposed method can contribute to increase the reliability of the performance of neutron absorbers.