• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.107-114
• /
• 2010

This study was undertaken to suggest a Pinus densiflora community planting model in the central cool temperate zone of Korea and nearby areas. For the purpose of this study, we surveyed various DBH classes of the P. densiflora community in Dangjin-gun, Choongchungnam-do. We surveyed the size of entire individuals in the 92 plots as well as surveyed the location of individuals in each tree layer and sub-tree layer(1/100 scale) of 44 plots using a quadrant method from young to old communities. As a result of analysis, the tree layer was growing well but the basal areas of the subtree layer were less than 10% compared with the tree-layer. This indicates the subtree layer is not in general growing well in the P. densiflora community. There were no significant patterns in the shrub layer. A P. densiflora community planting would consist of a tree layer and a shrub layer and the finding of growth patterns of the tree layer is significant. In order to make a model of the shrub layer, an additionally survey of another shrub layer is needed in a nearby planting area. Both regression models, 1) between tree layer DBHs and individuals per unit area, and 2) between individuals per unit area and shortest distances of individuals, can yield much information through study.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.203-209
• /
• 2019

In this work, a new land-specific resistance measuring device (GM) and a measuring probe (Grounding Rod) are connected to the WENNER quadrant as power-line communication (PLC). In groups of two (P1,P2) probes, five to ten probes are installed in series on the ground at intervals of 1m, 2m, 4m, 8m, and 16m, respectively. If the PLC signal from the GMD is detected by the receiver of the Probe 1 (P1) for measurement, the minute voltage and current for measurement flow from the PSD (power supply) attached to the probe to the ground, and then, through the soil between P1 and P2, enters the Probe 1 (P2). The resistance value is then measured by the principle of voltage drop due to ground resistance. Measure the earth resistance every T seconds up to 1 trillion and store the measured data on the Arduino Server mounted on the main equipment. Stored measurement data can be derived from formulas by Ohm's Law and from inherent resistance (here,). Data obtained in real time will be linked to CDGES programs installed on Main PC, enabling data analysis and real-time monitoring of the ground environment on land. In addition, a three-dimensional display is possible with 3D graph support by identifying seasonal characteristics such as temperature and humidity of land (soils). The limitations of the study will require specific application measures of Test Bed for commercial access to a model that has been developed and operated experimentally.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.467-482
• /
• 2022

The Yeonghae basin is located at the northeastern part of the Yangsan fault (YSF; a potentially active fault). The study of the architecture of the Yeonghae basin is important to understand the activity of the Yangsan fault system (YSFS) as well as the basin formation mechanism and the activity of the YSFS. For this study, Digital Elevation Model (DEM) was used to highlight the marginal faults, and structural fieldwork was performed to understand the geometry of the intra-basinal structures and the nature of the bounding faults. DEM analysis reveals that the eastern margin is bounded by the northern extension of the YSF whereas the western margin is bounded by two curvilinear sub-parallel faults; Baekseokri fault (BSF) and Gakri fault (GF). The field data indicate that the YSF is striking in the N-S direction, steeply dipping to the east, and experienced both sinistral and dextral strike-slip movements. Both the BSF and GF are characterized dominantly by an oblique right-lateral strike-slip movement. The stress indicators show that the maximum horizontal compressional stress was in NNE to NE and NNW-SSE, which is consistent with right-lateral and left-lateral movements of the YSFS, respectively. The plotted structural data show that the NE-SW is the predominant direction of the structural elements. This indicates that the basin and marginal faults are mainly controlled by the right-lateral strike-slip movements of the YSFS. Based on the structural architecture of the Yeonghae basin, the study area represents a contractional zone rather than an extensional zone in the present time. We proposed two models to explain the opening and developing mechanism of the Yeonghae basin. The first model is that the basin developed as an extensional pull-apart basin during the left-lateral movement of the YSF, which has been reactivated by tectonic inversion. In the second model, the basin was developed as an extensional zone at a dilational quadrant of an old tip zone of the northern segment of the YSF during the right-lateral movement stage. Later on, the basin has undergone a shortening stage due to the closing of the East Sea. The second model is supported by the major trend of the collected structural data, indicating predominant right-lateral movement. This study enables us to classify the Yeonghae basin as an inverted strike-slip basin. Moreover, two opposite strike-slip movement senses along the eastern marginal fault indicate multiple deformation stages along the Yangsan fault system developed along the eastern margin of the Korean peninsula.

• Journal of the Korean Society of Radiology
• /
• v.81 no.2
• /
• pp.379-394
• /
• 2020

Purpose To design a scoring system to predict malignancy of additional MRI-detected lesions in breast cancer patients. Materials and Methods Eighty-six lesions (64 benign and 22 malignant) detected on preoperative MRI of 68 breast cancer patients were retrospectively included. The clinico-radiologic features were correlated with the histopathologic results using the Student's t-test, Fisher's exact test, and logistic regression analysis. The scoring system was designed based on the significant predictive features of malignancy, and its diagnostic performance was compared with that of the Breast Imaging-Reporting and Data System (BI-RADS) category. Results Lesion size ≥ 8 mm (p < 0.001), location in the same quadrant as the primary cancer (p = 0.005), delayed plateau kinetics (p = 0.010), T2 isointense (p = 0.034) and hypointense (p = 0.024) signals, and irregular mass shape (p = 0.028) were associated with malignancy. In comparison with the BI-RADS category, the scoring system based on these features with suspicious non-mass internal enhancement increased the diagnostic performance (area under the receiver operating characteristic curve: 0.918 vs. 0.727) and detected three false-negative cases. With this scoring system, 22 second-look ultrasound examinations (22/66, 33.3%) could have been avoided. Conclusion The scoring system based on the lesion size, location relative to the primary cancer, delayed kinetic features, T2 signal intensity, mass shape, and non-mass internal enhancement can provide a more accurate approach to evaluate MRI-detected lesions in breast cancer patients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.527-536
• /
• 2016

This study aims to generate baseline data for vitalizing the sales of functional cosmetics through an Importance-Performance Analysis (IPA) of the selection attributes of functional cosmetics. From the analysis of consumers' selection criteria, the study will assist functional cosmetics companies in reflecting consumer demands and therefore securing competitiveness. For this, general consumers aged over 20 years were surveyed for 5 weeks from Feb 23 through Mar 30, 2015, and 447 empirical data (response rate 88.9%) were processed through SPSS WIN 21.0 program for analysis. To conduct gender difference analysis on the IPA of the selection attributes of functional cosmetics, 17 selection attributes were categorized into 4 factors: functionality, labeling, popularity, and product. Cronbach's alpha for all factors was 0.5, proving the internal consistency and reliability of the survey. The survey results showed that while the entire average came out significantly higher for females (5.89/7points) than for males (5.66/7points) (p<0.001), the selection attributes 'anti-wrinkling', 'whitening function', 'functionality', 'expiration date', 'full ingredient labeling system' and 'various promotional events' showed significant gender differences. IPA results pertaining to gender showed 'price', 'functionality', 'spreadability' and 'full ingredient labeling system' as 2nd quadrant attributes, whereas female consumers selected 'price', 'whitening function', 'anti-wrinkling', 'functionality' and 'full ingredient labeling system' as attributes. Results show that businesses in the field of cosmetics and related areas need to prioritize improving the following factors that received low satisfaction from all consumers: 'price', 'functionality', and 'total labeling.' In particular, the 'price' aspects are considered to require reasonable and affordable pricing.

• Korean journal of food and cookery science
• /
• v.16 no.5
• /
• pp.437-444
• /
• 2000

The purpose of this study were to identify customer expectation, perception and satisfaction of foodservice quality to analyze the influencing factors on foodservice quality and finally to provide basic information for the improvement of foodservice quality. Among expectation scores of food quality attributes, ‘hygiene of food(3.27)’received the highest score. In expectation scores of service quality attributes,‘hygiene of tableware(3.40)’was the most important. Satisfaction of ‘appropriate 1 portion size(-0.11)’was the highest scored, while‘dealing with complaints on meals(-0.70)’was the most dissatisfied one. Satisfaction was highly correlated with‘providing preferred menu(r = -0.62)’of food quality expectation. It was highly correlated with‘dealing with complaints on meals(r = -0.61)’of service quality expectation. Expectation and perception of foodservice as 2.25 and 2.90 out of 5, respectively, which suggests that foodservice needs to be improved. The attributes identified in Quadrant A, which was labelled‘focus here’and supposed to indicate the areas of high expectation but in low perception, was hygiene of carts holding used trays. The results of expectation and perception analysis indicated the areas that the attention of management should be given to improve quality of foodservice. The stepwize regression analysis suggested that foodservice expectation and perception explaints around 56.7% of the variation in general customer satisfaction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.4
• /
• pp.593-601
• /
• 2016

This study was carried out to establish an effective marketing strategy based on Importance-Performance Analysis (IPA) of rice-convenience foods. IPA is one of the most efficient and simple methods to evaluate product quality. Data were collected from 652 people (320 males and 332 females) and analyzed by SPSS 19.0. Subjects consumed rice-convenience foods as a snack substitute (19.3%), breakfast (20.7%), lunch (37.4%), dinner (15.2%), and late-night meal (7.4%). The purpose for consumption of rice-convenience foods were as follows: light meal (34.8%), lack of time to prepare meal (42.2%), favorite restaurant is not nearby (2.3%), save money (3.4%), and outdoor activities (9.7%). All attributes about rice-convenience foods were categorized into intrinsic property and extrinsic property. As a result of factor analysis, health, sensibility, and diversity factors were extracted from intrinsic property. In addition, dependence and appearance factors were drawn from extrinsic property. In analyzing the differences between importance and performance, there were significant differences; 16 items in the intrinsic property (P<0.01), and 10 items in the extrinsic property (P<0.001). The IPA matrix is composed of four quadrants, and each represents different strategies; the first, 'keep up the good work', the second, 'possible overkill', the third, 'low priority for management', and the fourth, 'concentrate management'. As a result, factors of rice-convenience foods positioned in the fourth quadrant were 'safety (from food additives, etc.)' and 'price' in the intrinsic property and 'nutrition label' and 'safety of packaging material' in the extrinsic property. They need to be improved immediately. In this study, rice-convenience food factors for continuous maintenance and concentrative improvement were compared by IPA. Based upon the results of this study, it is necessary to develop methods to make efficient use of limited resources and practical marketing strategies.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1639-1644
• /
• 2012

This study analyzed the Importance-Performance Analysis of selective attributes of Home Meal Replacement (HMR). This study was conducted using a primary field survey on department stores and wholesale markets in Seoul and Gyeonggi province. A total of 201 out of 234 questionnaires were analyzed. First, the highest intake frequency was 1~3 times a month (100 respondents: 48%), the most common purchasing place was wholesale market (148 respondents: 73.6%), and the most cited reason for preference was convenience (115 respondents: 57.2%). According to the IPA results, selective attributes with low satisfaction and high importance in the second quadrant were 'quality', 'health', 'hygiene', 'origin of food', and 'safety'. These results suggest that the microbiological and sensory qualities of HMR production should be improved to meet consumer's expectations.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.82-100
• /
• 2024

Due to the intensifying global technological competition, the strategic and economic importance of intellectual property such as patents as intangible assets is increasing. The purpose of this study is to understand the current status of patent innovation in the service industry and to derive the characteristics and implications of patent innovation in the service industry. To this end, this study conducted an investigation and analysis to understand the characteristics of patent innovation in the service industry based on the data from the business activity survey. The proportion of patent companies in the service industry, characteristics of each service industry, proportion of each service industry, and the number of patent rights holdings were analyzed. In addition, the trend of patent changes in the service industry was investigated. The service industry was compared and analyzed with other industries based on the results of the analysis of patent innovation in the service industry. In particular, the service industry was divided into four types in terms of the rate of increase in the proportion of patent companies and the ratio of patent holing companies, and the types were derived. Based on the analysis results, the characteristics of patent innovation in the service industry were presented. As a result of the study, the proportion of patent holding companies in the service industry was lower than that of other industries, and the gap with other industries was widening, showing that the patent innovation of service companies is lower than that of other industries. The average number of patents held by service industry companies was lower than that of other industries, and the increase rate of the number of patent rights held was also lower than that of other industries, widening the gap. Patent innovation in the service industry can be divided into four quadrants in terms of the rate of increase in the proportion of patent holding companies and the proportion of patent holding companies, and it has been studied that the service industry needs policy support suitable for the characteristics of patent innovation in the quadrant to which the individual service industry belongs.

• Journal of Trauma and Injury
• /
• v.23 no.2
• /
• pp.107-112
• /
• 2010

Purpose: Recently, the change to a more complex social structure has led to an increased frequency of traumas due to violence, accident and so on. In addition, the severity of the traumas and the frequency of penetrating injuries have also increased. Traumas to cervical and abdominal areas, what are commonly seen by general surgeons, can have mild to fatal consequences because in these areas, various organs that are vital to sustaining life are located. The exact location and characteristics of the injury are vital to treating patients with the trauma to these areas. Thus, with this background in mind, we studied, compared, and analyzed clinical manifestations of patients who were admitted to Wonju Christian hospital for penetrating injuries inflicted by themselves or others. Methods: We selected and performed a retrospective study of 64 patients who had been admitted to Wonju Christian Hospital from January 2005 to December 2009 and who had cervical or abdominal penetrating injuries clearly inflicted by themselves or others. Results: There were 51 male (79.7%) and 13 female (20.3%) patients, and the number of male patients was more dominant in this study, having a sex ratio of 3.9 to 1. The range of ages was between 20 and 86 years, and mean age was 43.2 years. There were 5 self-inflicted cervical injuries, and 19 self-inflicted abdominal injuries, making the total number of self-inflicted injury 24. Cervical and abdominal injuries caused by others were found in 11 and 29 patients, respectively. The most common area involved in self-inflicted injuries to the abdomen was the epigastric area, nine cases, and the right-side zone II was the most commonly involved area. On the other hand, in injuries inflicted by others, the left upper quadrant of the abdomen was the most common site of the injury, 14 cases. In the neck, the left-side zone II was the most injured site. In cases of self-inflicted neck injury, jugular vein damage and cervical muscle damage without deep organ injury were observed in two cases each, making them the most common. In cases with abdominal injuries, seven cases had limited abdominal wall injury, making it the most common injury. The most common deep organ injury was small bowel wounds, five cases. In patients with injuries caused by others, six had cervical muscle damage, making it the most common injury found in that area. In the abdomen, small bowel injury was found to be the most common injury, being evidenced in 13 cases. In self-inflicted injuries, a statistical analysis discovered that the total duration of admission and the number of patients admitted to the intensive care unit were significantly shorter and smaller, retrospectively, than in the patient group that had injuries caused by others. No statistically significant difference was found when the injury sequels were compared between the self-inflicted-injury and the injury-inflicted-by-others groups. Conclusion: This study revealed that, in self-inflicted abdominal injuries, injuries limited to the abdominal wall were found to be the most common, and in injuries to the cervical area inflicted by others, injuries restricted to the cervical muscle were found to be the most common. As a whole, the total duration of admission and the ICU admission time were significantly shorter in cases of self-inflicted injury. Especially, in cases of self inflicted injuries, abdominal injuries generally had a limited degree of injury. Thus, in our consideration, accurate injury assessment and an ideal treatment plan are necessary to treat these patients, and minimally invasive equipment, such as laparoscope, should be used. Also, further studies that persistently utilize aggressive surgical observations, such as abdominal ultrasound and computed tomography, for patients with penetrating injuries are needed.