• Nutrition Research and Practice
• /
• 제7권4호
• /
• pp.309-314
• /
• 2013

This study was conducted to investigate the relationship among the current status of calcium intake from milk and milk products, physical growth and bone mineral density in 664 male and female middle school and high school students aged 15-17 years. In the study, the current status of calcium intake from milk and milk products was analyzed, and the height, body composition, and bone mineral density of the right heel bone (calcaneus) were measured. The daily calcium intake of milk and milk products was calculated as the 'dairy equivalent of calcium', which is the calcium content in 200 mL of white milk. The cutoffs of tertiles of the dairy equivalent of calcium were calculated and then the subjects were categorized into 3 groups according to the tertiles, Q1 group (lower intake group), Q2 group (middle intake group) and Q3 group (upper intake group). The daily calcium intake of milk and milk products in Q1, Q2 and Q3 groups was 16.2 mg, 99.7 mg, and 284.0 mg, respectively, and the ratio of milk and milk product consumption to the daily total calcium intake was 5.4%, 27.4%, and 49.7%, respectively. The ratio of total calcium intake to the daily recommended intake in study subjects was 30.5% in Q1, 42.3% in Q2, and 60.7% in Q3, with significant differences (P < 0.05). Height, body weight, BMI, and % of body fat in three tertile groups (Q1, Q2 and Q3) were not significantly different. However, the T scores for bone mineral density in female students in three tertile groups (Q1, Q2 and Q3) was significantly different (P < 0.05). The study showed that the intake of milk and milk products in adolescents, particularly in girls, can improve the bone mineral density without increasing body weight, and thus confirmed that milk intake is important in adolescence.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1143-1148
• /
• 2007

LRE(Liquid propellant Rocket Engine) is one of the important parts to control the motion of rocket. For operation of rocket in error boundary of the set-up trajectory, it is necessarily to control the thrust of LRE according to the required thrust profile and control the mixture ratio of propellants fed into combustor for the constant mixture ratio. It is not easy to control thrust and mixture ratio of propellants since there are co-interferences among the components of LRE. In this study, the dynamic model of LRE was constructed and the dynamic characteristics were analyzed with control system as PID control and PID+Q-ILC(Iterative Learning Control with Quadratic Criterion) control. From the analysis, it could be observed that PID+Q-ILC control logic is more useful than standard PID control system for control of LRE.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권6호
• /
• pp.254-261
• /
• 2003

This study investigates magnetic circuit design of the Single-phase Line-start Permanent Magnet Synchronous Motor (LSPM) to develop the characteristics in steady state. In this paper, the saliency ratio, that is the ratio of q-axial inductance to d-axial inductance, and the inductance difference between q-axial inductance and d-axial inductance are increased. Design factor is selected permanent magnet position and rotor diameter. The analysis method of the synchronous motor on d-/q- axis coordinates is used for the positive component and the equivalent circuit of the induction motor is applied for the negative component analysis. Back-emf and d-q- axial inductance is analyzed by using 2 dimensional Finite Element Method (FEM). Characteristic analysis results with variation of design factor are reflected magnetic circuit design of LSPM. The characteristics of design model are compared with the characteristic of initial model.

• 한국운동역학회지
• /
• 제19권4호
• /
• pp.617-625
• /
• 2009

The primary purpose of this study was to compare the hamstring-to-quadriceps strength(H/Q) ratios in collegiate soccer players and normal age-matched healthy students, and the secondary purpose was to investigate the changes in the H/Q ratio according to the degree of knee flexion. Twenty-five subjects volunteered to participate in this study. The study group comprised 12 healthy male collegiate soccer players, and the control group, 13 healthy age-matched male collegiate students. The modified N-K table was used for isometric strength measurement(unit: N). Mann-Whitney tests were performed to determine the differences in the H/Q ratios of soccer players and age-matched students at different knee flexion angles of the dominant leg. The strength of the hamstring muscle in the study group was significantly lower than that observed in the control group at knee flexion angles of $60^{\circ}$ (p<.001), $90^{\circ}$ (p<.01), and $120^{\circ}$ (p<05). The strength of the quadriceps muscle in the study group was significantly higher than that observed in the control group at flexion angles of $30^{\circ}$ (p<.001) and $60^{\circ}$ (p<.05). The H/Q ratios in the study and control groups differed significantly at all angles ($60^{\circ}$, p<.001, $90^{\circ}$, p<.001 and $120^{\circ}$, p<.001).

• Journal of Information Display
• /
• 제7권3호
• /
• pp.1-4
• /
• 2006

2.22-inch qVGA $(240{\times}320)$ amorphous silicon thin film transistor liquid active matrix crystal display (a-Si TFT-AMLCD) panel has been successfully demonstrated employing a 2.5 um fine-patterning technology by a wet etch process. Higher resolution 2.22-inch qVGA LCD panel with an aperture ratio of 58% can be fabricated as the 2.5 um fine pattern formation technique is integrated with high thermal photo-resist (PR) development. In addition, a novel concept of unique a-Si TFT process architecture, which is advantageous in terms of reliability, was proposed in the fabrication of 2.22-inch qVGA LCD panel. Overall results show that the 2.5 um fine-patterning is a considerably significant technology to obtain higher aperture ratio for higher resolution a-Si TFT-LCD panel realization.

• 생명과학회지
• /
• 제18권1호
• /
• pp.30-37
• /
• 2008

본 연구에서는 남자 고등부 태권도 선수들을 대상으로 하여 등장성운동과 등척성 등장성운동을 혼합하여 복합 훈련을 실시한 차이를 알아보기 위하여 등속성 근 기능 중 최대우력, 동측근력비율, 양측근력비율, 근지구력을 분석한 결과를 다음과 같은 결론으로 나타내었다. 첫째, 최대우력은 좌우측 신굴근 모두에서 등장성 운동집단에 비하여 복합 훈련집단이 유의하게 증가한 것으로 나타났다. 둘째, 동측근력비율, 근지구력은 두 집단 간에 유의한 차이는 나타나지 않았지만, 운동전후에 차이에 있어서는 두 집단 모두 유의하게 증가하였다. 셋째, 양측근력비율은 두 집단 간에 유의한 차이는 나타나지 않았지만, 운동전후에 차이에 있어서는 두 집단 모두 유의하게 감소하였다. 이러한 결과로서 태권도 선수들의 경기력 증가를 위한 주요 체력요소인 평형능력, 근 지구력의 향상을 위한 방법으로 등장성 운동과 복합훈련 중 어떠한 방법으로 실시하여도 근 기능을 향상 시킬 수 있는 운동법으로 생각된다. 그러나 등척성 운동과 등장성 운동을 복합적으로 실시하였을 경우 최대우력이 등장성운동을 실시한 집단에 비하여 유의하게 증가하는 현상으로 보면 태권도 발차기의 파워를 보다 증가시키기 위해서는 등장성 운동과 등척성을 복합적으로 실시하는 운동방법이 보다 효과적인 방법으로 생각된다.

• 국제물리치료학회지
• /
• 제11권1호
• /
• pp.1969-1974
• /
• 2020

Background: Early rehabilitation after partial meniscectomy is important to recover the balance of the vastus medialis oblique and vastus lateralis and prevent pathological problems in the lower extremities and the whole body. Objective: To compare muscle activations for patients after partial meniscectomy. Design: Dual-group Pretest-Posttest Design from the Quasi-Experimental Research. Methods: Twenty participants after partial meniscectomy were recruited and were randomly divided into a Q-setting sensorimotor training group (QSMTG) and Q-setting exercise group (QSEG). Muscle activity of the vastus medialis oblique and vastus lateralis was measured before and after intervention. Results: In the two groups, the vastus medialis oblique and vastus lateralis activations increased significantly (P<.05). The Q-setting sensorimotor training group showed more increases than the Q-setting exercise group, and there were significant differences between the groups (P<.05). The activation ratio of the vastus medialis oblique and vastus lateralis had increasingly significant differences in the Q-setting sensorimotor training group (P<.05), and there were no significant differences between the groups (P>.05). Conclusion: Q-setting exercise with sensorimotor training was a useful method that improved the balance of vastus medialis oblique (VMO) and vastus lateralis (VL) activity after meniscectomy.

• 대한수학회보
• /
• 제55권5호
• /
• pp.1317-1332
• /
• 2018

In this paper, we introduce the D-ratio of a rational map $f:{\mathbb{P}}^n{\dashrightarrow}{\mathbb{P}}^n$, defined over ${\bar{\mathbb{Q}}}$, whose indeterminacy locus is contained in a hyperplane H on ${\mathbb{P}}^n$. The D-ratio r(f; ${\bar{V}}$) characterizes endomorphisms and provides a useful height inequality on ${\mathbb{P}}^n({\bar{\mathbb{Q}}}){\backslash}H$. We also provide a dynamical application: preperiodic points of dynamical systems of small D-ratio are of bounded height.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.603-609
• /
• 2004

The objective of this study was to determine the optimal operation conditions in an anoxic oxic process to eliminate both organic and nitrogen matters in swine wastewater. For the purpose of this, the removal efficiency was evaluated with various HRTs and internal recycling ratio. During the whole 580 days of experiment, HRTs had been gradually decreased in an order of 20, 14, 12 and l0days, and the internal recycle ratio was kept at 20Q. So as to determine the effect of the internal recycle ratio on the nitrogen removal, the internal recycle ratio had been gradually increased from 20Q to 50Q while HRT was maintained at 12days. As a result, it was shown that the removal efficiency of organic matter was above 95% regardless of changing of HRTs. The average influent concentration of TCODcr and SCODcr were 24,854 mg/L and 18,920 mg/L, respectively. Average removal efficiency of TKN was shown to be nearly 98% when HRT was kept at 12days; however, the $NH_4{^+}-N$ concentration of effluent was shown to be increased when the loading rate of $NH_4{^+}-N$ was increased to $0.602 kgNH_4{^+}-N/m^3$-day by means of decreasing HRT to 10days. It was concluded that nitrogen loading rates should be more considered rather than organic loading rates in case of determining an optimal HRT. When gradually increasing the internal recycle ratio from 20Q to 50Q, the removal efficiency of organic matters and TKN were 96% and 98%, respectively so that no significant changes in removal efficiency was detected. However, when the internal recycle ratio was kept at 50Q, it was revealed that the $NO_3-N$ concentration of effluent seemed to drop and the average $NO_3-N$ concentration of effluent was around 52 mg/L.

• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.758-763
• /
• 2002

초음파 에너지(28 kHz, 40 kHz, 70 kHz)를 사용하여 수직자기기록용 Ba-ferrite의 자기적 특성 향상에 대하여 조사하였다. 한편, 분산된 Ba-ferrite를 sheet에 수직으로 배향시키기 위해 다양한 형태의 배향기들을 사용하여 실험을 행하였다. Ba-ferrite가 도포된 sheet 중 초음파 에너지가 40 kHz이고 초음파 처리 시간이 2시간에서 자기적 특성인 S. Q. (Squareness Ratio)와 O. R. (Orientation Ratio)값이 각각 0.7831과 2.87로 비교적 좋은 값을 얻을 수 있었다. 이때 얻어진 sheet의 표면 형상을 SEM(Scanning Electron Microscopy)으로 분석한 결과 Ba-ferrite가 자화용이축인 c 축에 수직방향으로 배향되어 수직자기기록용으로서의 응용에 가능성을 보였다. 또한, VSM(Vibrating Sample Magnetometer)으로 자기장의 각도변화에 따른 S. Q.의 측정시, 자기장의 각도가 증가함에 따라 S. Q. 값이 감소하였고 이는 수직자기기록용으로써 가능성을 재확인 시켜주었다.