• Journal of Astronomy and Space Sciences
• /
• v.20 no.2
• /
• pp.133-142
• /
• 2003

The contact binary system has been classified in five different types according to their physical properties. We suggest that extremely small mass ratio contact binary systems(q＜0.2) could be classified as a new type of contact binaries in addition to the classification. According to the Svechnikov & Kuznetsova (1990)'s catalogue, the spectral types of primary components of newly classified contact binaries are distributed at A type, and also the distribution of their various physical characteristics is laid at the center region dividing the early-type contact binaries from late-type contact binaries.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.6
• /
• pp.263-272
• /
• 2001

The paper presents the design of a segmented type synchronous reluctance motor(SynRM) to increase its torque and power factor. The main feature of a segmented type synchronous reluctance motor is the flux barrier. Thus, the design process to find optimum value of various geometric parameters including flux barrier will be explained. Optimum value of each parameter is found where the d, q inductance difference and saliency ratio are maximized because these inductance characteristics are related to torque and power factor. Finite Element Analysis will be used to simulate motor characteristics. Analysis results of redesigned SynRM show higher saliency ratio over 10 and improved value of maximum power factor.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.76-83
• /
• 1996

Four natural Quercus stands in Kwangju, Kyonggi-Do, of which ages ranging from 32 to 38 years old, were studied to compare their growth, biomass and net production. Ten $10m{\times}10m$ quadrats were set up and ten sample trees were harvested for dimension analysis in each stand. The largest mean DBH and height were shown by Q. acutissima stand, and followed by Q. variabilis stand, Q. mongolica stand, and Q. dentata stand in descending order. Tree density was the highest at Q. variabilis stand, and followed by Q. dentata stand, Q. mongolica stand, and Q. acutissima stand in descending order. Biomass was the largest at Q. acutissima stand(122.73t/ha), and followed by Q. variabilis stand(87.03t/ha), Q. mongolica stand(72.14t/ha), and Q. dentata stand(38.56t/ha) in descending order. Net production was the greatest at Q. mongolica stand(7.49t/ha/yr.), and followed by Q. variabilis stand(6.47t/ha/yr.), Q. acutissima stand(6.06t/ha/yr.), and Q. dentata stand(3.52t/ha/yr.) in descending order. The highest net assimilation ratio was exhibited by Q. acutissima stand (3.275), and followed by Q. variabilis stand(2.898), Q. mongolica stand(2.888), and Q. dentata stand (1.840) in descending order. The difference in net assimilation ratio and net production among four stands was caused by differences in their leaf biomass. The difference in net production and biomass among four stands was due to that in the distribution of net production among stems, branches and leaves.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.6
• /
• pp.47-57
• /
• 2022

A number of different methods have been used for modeling the sorption of volatile organic chlorinated compounds such as tetrachloroethylene/perchloroethylene (PCE). In this study, PCE was adsorbed in several natural sorbents, i.e., Pahokee peat, vermicompost, BionSoil^®, and natural soil, in the batch experiments. Several sorption models such as linear, Freundlich, solubility-normalized Freundlich model, and Polanyi-Manes model (PMM) were used to analyze sorption isotherms. The relationship between sorption model parameters, organic carbon content (f_oc), and elemental C/N ratio was studied. The organic carbon normalized partition coefficient values (log K_oc = 1.50-3.13) in four different sorbents were less than the logarithm of the octanol-water partition coefficient (log K_ow = 3.40) of PCE due to high organic carbon contents. The log K_oc decreased linearly with log f_oc and log C/N ratio, but increased linearly with log O/C, log H/C, and log (N+O)/C ratio. Both log K_F,oc or log K_F,oc decreased linearly with log f_oc (R² = 0.88-0.92) and log C/N ratio (R² = 0.57-0.76), but increased linearly with log (N+O)/C (R² = 0.93-0.95). The log q_max,oc decreased linearly as log f_oc and log C/N increased, whereas it increased with log O/C, log H/C and log (N+O)/C ratios. The log q_max,oc increased linearly with (N+O)/C indicating a strong dependence of q_max,oc on the polarity index. The results showed that PCE sorption behaviors were strongly correlated with the physicochemical properties of soil organic matter (SOM).

• The Journal of Korean Physical Therapy
• /
• v.28 no.2
• /
• pp.65-70
• /
• 2016

Purpose: The aim of this study was to determine the effects of electromyographic (EMG)-Biofeedback using closed kinetic chain exercise (EB-CKCE) on quadriceps angle (Q-angle) and quadriceps muscle activation and muscle activation ratio in subjects with patellofemoral pain syndrome and to provide fundamental information on rehabilitation exercise in patellofemoral pain syndrome. Methods: Thirty participants who met the criteria were included. The subjects were randomly divided into three groups: control group (Group I, n=10), semi-squat exercise group (Group II, n=10), and EMG-Biofeedback using closed kinetic chain exercise group (Group III, n=10). Intervention was provided to each group for eight weeks (three times per week; 30 minutes per day). Subjects were measured on Q-angle and quadriceps muscle activation. Results: Significant difference in Q-angle and quadriceps muscle activation was observed in groups II and III compared with control group I (p<0.01). Results of post-hoc analysis showed a significant difference in Q-angle and quadriceps muscle activation in on group III compared with groups I and II. Conclusion: Findings of this study suggest that closed kinetic chain exercise using EMG-Biofeedback that provides real-time biofeedback information on muscle contraction may have a beneficial effect on improvement of Q-angle and quadriceps muscle activation in patellofemoral pain syndrome.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.331-340
• /
• 2009

This study evaluates the relationship between cone tip resistance ($q_c$) and small-strain shear modulus ($G_{max}$) of cemented sand. For this purpose, a series of miniature cone penetration and bender element tests are performed in calibration chamber specimens with various gypsum contents. Experimental results show that both $q_c$ and $G_{max}$ of sand increase with increasing cementation level as well as relative density and vertical confining stress. However, the relative density and vertical confining stress has more significant influence on $G_{max}$ and $q_c$ of uncemented sand than those of cemented sand. It is observed that the $G_{max}/q_c$ ratio of cemented sand decreases with increasing relative density. This result means that state variables have more affect on $q_c$ than $G_{max}$ of cemented sand. Test results also show that the effect of vertical stress on $G_{max}-q_c$ relation is reduced by cementation effect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8A
• /
• pp.805-814
• /
• 2008

Both EPCglobal Generation-2 (Gen2) for passive RFID systems and Intelleflex for semi-passive RFID systems use probabilistic slotted ALOHA with Q algorithm, which is a kind of dynamic framed slotted ALOHA (DFSA), as the tag anti-collision algorithm. A better tag anti-collision algorithm can reduce collisions so as to increase the efficiency of tag identification. In this paper, we introduce and analyze the estimation methods of the number of slots and tags for DFSA. To increase the efficiency of tag identification, we propose two new tag anti-collision algorithms, which are Chebyshev's inequality (CHI) algorithm and hybrid Q algorithm, and compare them with the conventional Q algorithm and adaptive adjustable framed Q (AAFQ) algorithm, which is mentioned in Part I. The simulation results show that AAFQ performs the best in Gen2 scenario. However, in Intelleflex scenario the proposed hybrid Q algorithm is the best. That is, hybrid Q provides the minimum identification time, shows the more consistent collision ratio, and maximizes throughput and system efficiency in Intelleflex scenario.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3B
• /
• pp.153-159
• /
• 2012

In this study, we proposed modified settling basins transformed by substituting the downstream sill for low head weirs such as generic labyrinth weir and inclined crest labyrinth weir worked as internal baffles. Laboratory experiments were carried out to understand hydraulic characteristics inside of the settling basin to improve the efficiency of sedimentation rate. For a quantitative analysis, we suggested the headwater ratio($H_t/P$), the magnification ratio(L/W) and the inflow rate per total crest length($q_L$) as primary analysis indexes for sedimentation efficiency. Six different types of settling basin were used for labscaled pilot tests by distinguishing with internal structures. Based on results, the variation of headwater ratio with the change of magnification ratio would highly affect the deposition efficiency(%) and it was improved under specific condition that repeating arrange number(N) of labyrinth weir was between 2 and 4. Also, the regression analysis showed that initial condition and shape for improving sedimentation efficiency were plotted on the graph for both $q_L{\geq}3.5cm^2/s$ and $L/W{\leq}3.5$. It would be expected that the geometrically optimized labyrinth settling basin could be designed with proper deposition efficiency for inflow rates of influent and required area of settling basin utilizing the proposed analysis index in this study.

• The Korean Journal of Ecology
• /
• v.17 no.3
• /
• pp.241-249
• /
• 1994

Leaf diffusive resistance (LDR), stomatal density, length of guard cell and hair density of leaves of 6 oak species were determined under withdrawal of water, and their strategies of drought stress were analyzed by principal component analysis. LDR of Quercus acutissima, Q. aliena and Q. serrata increased earlier than those of the other species at high leaf water potential $({\Psi}_{leaf})$ or low water saturation deficit (WSD), which was an avoidance mechanism reducing damage by water stress. Q. variabilis with low stomatal density, small stomatal size and high hair density had avoidance mechanisms increasing LDR at high $({\Psi}_{leaf})$ However, Q. mongolica and Q. dentata increased LDR at low $({\Psi}_{leaf})$ as xeric species do. Results from principal component analysis on the 15 variables related to strategies of drought stress indicated that the 6 oak species were divided into 2 groups: (1) Q. acutissima, Q. aliena and Q. serrata as mesic habitat species and (2) Q. variabilis, Q. mongolica and Q. dentata as xeric habitat species. Among three xeric species Q. acutissima differed from the other two species in the drought strategies such as high hair density, low stornatal density, high leaf area ratio, stomatal closing at low $({\Psi}_{leaf})$ and small cell wall elasticity. The results could reasonably explain their drought strategies in natural habitat.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.465-475
• /
• 2001

Based on the community structural attributes, such as species composition, diameter and height distribution, topographic position, and species diversity in the natural deciduous forest of Mt. Gari area, this study suggested desirable species and composition ratio to achieve ecological management of forests so as to maintain forest stability and enhance economical values. The results are as follows : 1. Twenty-five tree species were growing in the study forest. Of these Quercus mongolica, Pinus densiflora, Juglans mandshurica, Quercus serrata, Cornus controversa, Acer mono, Fraxinus rhynchophylla, and Tilia mandshurica were selected for desirable species through the evaluation of dominant and dominant potential. Kalopanax pictus, considered to be highly valuable species, was also included. 2. Taking account of different species composition pattern by topographic positions, we select as desirable species of J. mandshurica, C. controversa, Q. mongolica, A. mono, T. mandshurica, and F. rhynchophylla in the valley area, Q. mongolica, Q. serrata, A. mono, T. mandshurica, F. rhynchophylla, and K. pictus in the mid-slope area, and Q. mongolica, P. densiflora, Q. serrata, and Fraxinus rhynchophylla in the ridge area. 3. Based on the estimation of species diversity index for the overstory components, the reasonable forest stability levels of the indices were estimated at 1.96, 1.68, 1.94, and 1.27 for whole forest, valley, midslope, and ridge, respectively. 4. The recommended species composition ratios in the study forest were suggested Q. mongolica to be 30%, A. mono, F. rhynchophylla, Q. serrata, and T. mandshurica to be 10%~15%, J. mandshurica, P. densiflora, and C. controversa to be 5%~10%, and K. pictus to be 5%.