• 한국세라믹학회지
• /
• 제20권2호
• /
• pp.166-172
• /
• 1983

In this study the sillicon-alloyed isotropic pyrolytic carbon was deposited in the tumbling bed from the pyrolysis of propane and silicon tetrachloride and investigated whether the silicon-alloyed isotropic pyrolytic carbon deposited in this study was usable as bionaterial or not. The silicon-allyed isotropic pyrolytic carbon was varied by controlling the process variables such as propane con-concentration and the argon flow rate flowing in to the silicon tetrachloride bubbler at a fixed reaction bed tempera-ture of 120$0^{\circ}C$ a rotation of reaction tube of 40 rpm a bed particle weight of 7.5 g and a total flow rate of 21/min; the propane concentration was varied from 10 to 70 and the argon flow rate flowing into the silicon tetrachloride bubble from 0 to 1000 cc/min. The results show that the silicon-alloyed isotropic pyrolytic carbon was obtained at all conditions investigated, . And then the alloyed silicon content is rangion from 7 to 14.5 wt%. The density and deposition rate of deposited silicon-alloyed isotropic carbon increased axxording to silicon content and propane concentration. And the apparent crystal-size(Lc) of pyrolytic carbon is not changed with silicon content. The density and apparant crystallite size are respec-tively in the range of 1.94 to 2.06 and 20 to 25$\AA$ It is shown that the silicon-alloyed isotropic pyrolytic carbon ob-tained in this experiment is usable as biomaterial.

• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.86-94
• /
• 2011

열분해 온도와 체류시간을 달리하며 급속 열분해 공정을 통해 얻어진 백합나무 바이오오일로부터 분말 형태의 열분해리그닌(pyrolytic lignin)을 회수하였다. 바이오오일을 구성하고 있는 열분해리그닌의 특성을 이해하고 급속 열분해 실험 조건 - 반응 온도, 체류시간 - 이 열분해 과정에서 리그닌에 미치는 영향을 살펴보기 위해 수율을 비롯한 다양한 화학적, 구조적 분석을 수행하였다. 열분해 온도가 증가하고, 체류시간이 줄어들수록 바이오오일로부터 회수되는 열분해리그닌의 수율은 증가하였다. 열분해리그닌의 분자량은 백합나무 MWL (milled wood lignin)에 비해 1/10 수준인 약 1,200 mol/g로 측정되었다. 열분해리그닌 내 포함된 작용기 함량과 $^{13}C$ NMR 분석을 통해 바이오매스가 열분해되는 동안 탈메톡실화 반응과 리그닌의 propane side chain 분해반응이 우세하게 일어난다는 사실을 확인하였다.

• 한국연초학회지
• /
• 제6권2호
• /
• pp.131-139
• /
• 1984

The pyrolytic behavior of vanillin, a flavorant for manufactured cigarettes, was examined to find its contribution to the smoke composition. Vanillin was pyrolyzed at various temperatures (500-$900^{\circ}C$) in a stream of nitrogen. Pyrolytic products at $800^{\circ}C$ were identified with GC/MS. As increasing temperature, pyrolytic products did not appear with qualitative differences. Component analysis of the resulting products showed that 24 compounds were identified. and phenolic compounds were major products. The pyrolytic pathway of vanillin was also discussed.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.1047-1048
• /
• 2004

Simulation Coated layers of a nuclear fuel particle were evaluated by field emission scanning electron microscopy and nano-indentation method to give basic data to estimate 'Amoeba effect' and give an optimum fabrication condition and high quality control. Coated layers on the fuel kernel are in the order of buffer pyrolytic carbon, inner pyrolytic carbon, silicon carbide and outer pyrolytic carbon layers, which average thicknesses are 95, 25, 30 and 28 ${\mu}m$, respectively. Their densities and hardnesses are 1.08, 1.15, 3.18, 1.82 $g/cm^3$ and 0.522, 0.874, 9.641, and 2.726 GPa, respectively. Comparing theoretical density of pyrolytic carbon of 2.22 $g/cm^3$, the relative amount of porosity in each layer is about 52% for buffer, 48% for inner PyC and 18% for outer PyC.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.331.2-331
• /
• 1999

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.540-544
• /
• 2008

혼합플라스틱에 대한 열분해특성실험을 스테인레스 스틸의 회분식 미분반응기에서 수행하였으며, 혼합플라스틱의 혼합비율은 22 wt.% HDPE, 17 wt.% LDPE, 27 wt.% PP, 12 wt.% PS, 16 wt.% ABS, 6 wt.% PVC이었다. 열분해온도는 $410{\sim}450^{\circ}C$ 이었으며 각 열분해생성물의 수율은 무게측정을 통해 얻었으며, 액상생성물의 분자량분포는 GC-SIMDIS 방법을 통해 측정하였다. 혼합플라스틱 열분해의 경우 반응온도와 시간이 증가할수록 고상잔류물의 수율증가와 액상생성물의 수율감소 그리고 액상생성물의 평균 분자량 감소가 두드러졌다. 혼합플라스틱에 포함된 PVC의 약 20%가 염소가스형태로 배출됨을 알 수 있었다. 혼합플라스틱 열분해에서 말단절단의 속도계수인 활성에너지 값은 50.2 kcal/mole 이었다.

• 한국연초학회지
• /
• 제9권1호
• /
• pp.57-64
• /
• 1987

The pyrolysis of geometrical isomers of 9-octadecenoic acid were conducted at $600^{\circ}C$ under nitrogen, and its pyrolytic behaviors were investigated. The pyrolytic products of both fatty acids, cis-9-octadecenoic acid(oleic acid) and trans-9-octadecenoic acid(elaidic acid), were analyzed using a gas chromatograph and GC/MS spectrometer. Twenty-seven different compounds were identified from these pyrolyzates, and the chief products of them were ketones, alcohols and aromatic hydrocarbons. And also, the pyrolytic mechanisms of two geometrical isomers of this fatty acid were discussed by a comparison of experimental results.

• 한국환경성돌연변이발암원학회지
• /
• 제7권2호
• /
• pp.85-102
• /
• 1987

In spite of high incidences in gastrointestinal cancers in Korea, there have been few studies so far, which tried to detect or isolate the mutagenic, namely the carcinogenic substances in the Korean taste traditional foods. Among the many plausible dietary sources of carcinogens, the pyrolytic products of proteins or amino acids would be the major ones. And it is more noteworthy that the food pattern analysis showed the increasing consumption of protein foods by Korean as pyrolytic products, such as Bulgogi and Kalbi, etc.

• 환경위생공학
• /
• 제15권4호
• /
• pp.98-104
• /
• 2000

Commercial rubber(IR, NR, BR), SBR, and tire were degraded by thermal degradation process. The oil yield of rubbers and tire ranges about 37~86%, it was increased with increase of operation temperature in pyrolysis. And the yield of pyrolytic oil was increased with increase of heating rate. The maximum oil yields of IR, NR, BR, SBR, and tire were 80, 73, 83, 86 and 55% each at $700^{\circ}C$ with a heating rate of $20^{\circ}C$/min, respectively. The pyrolytic oil components were consisted of about 50 aromatic compounds. The calorific value of purolytic oil of commercial rubber, SBR, and tire was measured by calorimeter, it was 39~40 kJ/g. The BET surface area of pyroblack was $47~63m^2/g$. The optimum condition of pyrolysis was operating temperature of $700^{\circ}C$ with heating rate of $20^{\circ}C$. Therefore, the pyrolytic oil and pyroblack are possible to alternative fuel and carbon black.

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.156-164
• /
• 1984

The characteristic of pyrolytic carbon deposited in a fluidized bed as measured by density apparent crystallite size and viewed metallographically under polarized light can be easily controlled by adjusting the deposition parameters such as deposition temperature and propane flow rate or silicon content. The density of isotopic pyrolytic carbons deposited from propane between 120$0^{\circ}C$ and 140$0^{\circ}C$ increases with increasing propane flow rate and decreasing deposition temperature from 1, 73g/cc to 2.08g/cc. The apparent crystallite size Lc parameter appears to depend only on deposition temperature being entirely independent of the propane flow rate. The carbon matrix density of the silicon-alloyed carbonds deposited from propane and methyltrichlorosil-ane from 2.05g/cc for a silicon content around 9wt% to 2.67g/cc for a silicon content of 36.7wt% The Lc parameter of the deposition temperature being entirely independent of the silicon content.