• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.623-631
• /
• 2013

Wireless LAN (WLAN) interface is one of the major sources drastically depleting the battery power of mobile devices such as smartphones and tablets. Most commercial mobile devices employ a power saving technique putting their WLAN interface into a sleep state when there is no network traffic, and thereby, save the battery power. However, since an access point (AP) just transmits the packet(s) received from a server to the corresponding mobile device immediately, it may cause a problem that the mobile device constantly remains in an awake state so that its battery power is rapidly drained. In this paper, we point out this problem and propose a new scheme that can save the mobile device's battery power with an adaptive packet scheduling at the AP side. From the experimental results based on a testbed, we found that the proposed scheme outperforms existing schemes over 50% in terms of power saving.

• The Journal of the Korea Contents Association
• /
• v.8 no.7
• /
• pp.120-127
• /
• 2008

Practical use degree of Motion Capture technology is low in korea game market which did growth of MMORPG putting first. However, that is dance game or FPS, sports game genre is magnified. Therefore, practical use degree of Motion Capture technology is increasing. And, need various research to take advantage of Motion Capture technology effectively. Studied 3D game character animation manufacture pipe line for it. Characteristic of this manufacture pipe line is work classification, correction of two times, Biped format all-in-one to progress Motion Capture technology and keyframe-animation work at the same time. Also, manufacture pipe line that is consisted of this constituent has economic performance, extensity, systemicity.

• Korean Journal of Human Ecology
• /
• v.24 no.4
• /
• pp.555-569
• /
• 2015

During a design process of a protective equipment for sports activities, minimizing movement restrictions is important for enhancing its functions particularly for protection. This study presents a three-dimensional(3D) modeling methodology for designing baseball catcher's leg guards that will allow maximum possible performance, while providing necessary protection. 3D scanning is performed on three positions frequently used by a catcher during the course of a game by putting markings on the subject's legs at 3cm intervals : a standing, a half squat with knees bent to 90 degrees and 120 degrees of knee flexion. Using data obtained from the 3D scan, we analyzed the changes in skin length, radii of curvatures, and cross-sectional shapes, depending on the degree of knee flexion. The results of the analysis were used to decide an on the ideal segmentation of the leg guards by modeling posture. Knee flexions to 90 degrees and to $120^{\circ}$ induced lengthwise extensions than a standing. In particular, the vertical length from the center of the leg increases to a substantially higher degree when compared to those increased from the inner and the outer side of the leg. The degree of extension is varied by positions. Therefore, the leg guards are segmented at points where the rate of increase changed. It resulted in a three-part segmentation of the leg guards at the thigh, the knee, and the shin. Since the 120 degree knee-flexion posture can accommodate other positions as well, the related 3D data are used for modeling Leg Guard (A) with the loft method. At the same time, Leg Guard (B) was modeled with two-part segmentation without separating the knee and the shin as in existing products. A biomechanical analysis of the new design is performed by simulating a 3D dynamic analysis. The analysis revealed that the three-part type (A) leg guards required less energy from the human body than the two-part type (B).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.924-942
• /
• 2020

The facial expression is diverse and various among persons due to the impact of the psychology factor. Whilst the facial action is comparatively steady because of the fixedness of the anatomic structure. Therefore, to improve performance of the action unit recognition will facilitate the facial expression recognition and provide profound basis for the mental state analysis, etc. However, it still a challenge job and recognition accuracy rate is limited, because the muscle movements around the face are tiny and the facial actions are not obvious accordingly. Taking account of the moving of muscles impact each other when person express their emotion, we propose to make full use of co-occurrence relationship among action units (AUs) in this paper. Considering the dynamic characteristic of AUs as well, we adopt the 3D Convolutional Neural Network(3DCNN) as base framework and proposed to recognize multiple action units around brows, nose and mouth specially contributing in the emotion expression with putting their co-occurrence relationships as constrain. The experiments have been conducted on a typical public dataset CASME and its variant CASME2 dataset. The experiment results show that our proposed AU co-occurrence constraint 3DCNN based AU recognition approach outperforms current approaches and demonstrate the effectiveness of taking use of AUs relationship in AU recognition.

• Journal of Educational Research in Mathematics
• /
• v.12 no.1
• /
• pp.145-162
• /
• 2002

In this study, on the basis of the seventh national mathematics curriculum, the achievement standards were developed to specify the objectives and contents of teaching-learning and the assessment standards were also developed to differentiate students' levels of achievement at school mathematics. The achievement standards were developed on the following guidelines; 1) to present the minimum standards based on the national curriculum, 2) to develop the standards based on the order of curriculum, 3) to suggest the minimum but ultimate achievement target, 4) to comprise not only of the intellectual but also of psychological spheres such as knowledge, function, attitude, aptitude, etc., and 5) to suggest the standards comprehensively and concretely. The standards were developed on the basis of the middle areas of contents of the curriculum in order not to be too comprehensive, nor to be too detailed. Learning activities, on the other hand, were provided for the assistance of instructions with emphasis on creativity rather than on the routine instruction. The assessment standards were established based on the following principles; 1) to establish the assessment methods, contents, and situations which are to be used for assessment, 2) to establish the criteria of classifying the assessed into the upper, intermediate and lower levels, 3) to develop the assessment standards in a proportionate balance to achievement standards, 4) to establish the intermediate level as a standard, and 5) to establish the minimum level in the contents, concepts, values and attitudes of basic learning. This study also suggested the exemplary test items including short-answer and open-ended questions while putting emphasis on students' real performance to increase their ability in solving problems rather than in calculating. In addition to the test items, it introduced the grading system developed to grade the items with concrete guidelines and to report students' achievement on doing mathematics.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2013

In this study, one of the main aims is to build up a technical foundation for promoting the cadastral resurvey effectively and to improve the accuracy of cadastral surveying is to make use of precise surveying techniques in allowance of position errors as reference accuracy in cadastral resurvey, which is proper to obtain the sufficient accuracy of the cadastral control points, and parcel boundary points by introducing the GNSS-based surveying techniques on cadastral survey. In detail, the existing procedures and outcomes of cadastral survey were compared and analyzed for suggesting a better survey technique than that of the other techniques in a variety of aspects of capability of cadastral survey. The new skills and supports could be upmost importance when doing cadastral survey. What's more, essentially, 'The Measurement Department' makes all the efforts to establish 'The Surveying Regulations'. This could possibly apply GNSS-based surveying technique to the cadastral resurvey for the foreseeable future and this research paper suggested that how to improve absolute accuracy of cadastral reference points by means of putting to use the appropriate models of measurement further.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.3
• /
• pp.38-45
• /
• 2015

In this study, two computational methodologies were compared to consider an effective conjugate heat transfer analysis technique for the cooled vane with thermal barrier coating. The first one is the physical modeling method of the TBC layer on the vane surface, which means solid volume of the TBC on the vane surface. The second one is the numerical modeling method of the TBC layer by putting the heat resistance interface condition on the surface between the fluid and solid domains, which means no physical layer on the vane surface. For those two methodologies, conjugate heat transfer analyses were conducted for the cooled vane with TBC layer having various thickness from 0.1 mm to 0.3 mm. Static pressure distributions for two cases show quite similar patterns in the overall region while the physical modeling shows quite a little difference around the throat area. Thermal analyses indicated that the metal temperature distributions are quite similar for both methods. The results show that the numerical modeling method can reduce the computational resources significantly and is quite suitable method to evaluate the overall performance of TBC even though it does not reflect the exact geometry and flow field characteristics on the vane surface.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.37-43
• /
• 2001

In this paper, we propose a new optical security technique using two phase masks based on interferometer. A binary random phase image is used as a reference image and the encrypted image is generated according to the phase difference between the reference image and the original image. If there is no phase difference of a same pixel position in two phase masks, interference intensity of the pixel has minimum value and if phase difference of a same pixel position in two phase masks is $\pi$, its interference intensity has maximum value. We can decrypt the original image by putting two phase masks on each of the two optical paths of the Mach-Zehnder interferometer. Computer simulation and the optical experiments show a good performance of the proposed optical security system.

• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.183-193
• /
• 2010

For the purpose of enhancing performances, many companies have tried to ensure the competitive advantages in ties with organization's strategy by putting effort in designing, developing and practicing the information system. Despite the information oriented small and medium enterprises (SME) being suffered from lack of funds, professional man-power and poor environment, fairly evaluating the level of information system within an organization can be a positive starting point for information oriented SME. Therefore in this study, for the purpose of using the SERVQUAL as a measurement tool provided by information system department under the environment of using information system, we try to free from the marketing oriented service category and develop models that are applicable in the information system environment to check reliability and validity. As a result, it is analyzed that enhancements of SERVQUAL simultaneously improves system and information quality which makes the employees satisfy with their working environments and sequentially affects to the collaborative performance of using information system.

• Asian Journal of Turfgrass Science
• /
• v.20 no.2
• /
• pp.191-201
• /
• 2006

Dollar spot caused by Sclerotinia homeocarpa is one of major diseases in putting greens. Microorganisms antagonistic to S. homeocarpa, a pathogen of dollar spot, were primarily screened through in vitro tests, including dual culture method and triple layer agar diffusion method. In vivo tests were also conducted to select the best candidate for a biocontrol microorganism, using pot experiment. Bacillus subtilis EW42-1 and Trichoderma harziaum GBF-0208 were finally selected as biocontrol agents against dollar spot. Relative Performance Index(RPI) was used as a criterion of selecting potential biocontrol agents. B. subtilis EW42-1 and T. harzianum GBF-0208 showed resistance to several agrochemicals mainly used in a golf course. B. subtilis EW42-1 and T. harzianum GBF-0208 suppressed effectively the disease progress of dollar spot like synthetic fungicide tebuconazole in the nursery where dollar spot had seriously occurred. B. subtilis EW42-1 and T. harzianum GBF-0208 have a potential to be biocontrol agents for the control of dollar spot.