• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.624-630
• /
• 2006

ZnO deposition parameters are not independent and have a nonlinear and complex property. To propose a method that could verify and predict the relations of process variables, neural network was used. At first, ZnO thin films were deposited by using RF magnetron sputtering process with various conditions. Si, GaAs, and Glass were used as substrates. The temperature, work pressure, and RF power of the substrate were $50\sim500^{\circ}C$, 15 mTorr, and $180\sim210W$, respectively : the purity of the target was ZnO 4 N. Structural properties of ZnO thin films were estimated by using XRD (0002) peak intensity. The structure of neural network was a form of 4-7-1 that have one hidden layer. In training a network, learning rate and momentum were selected as 0.2, 0.6 respectively. A backpropagation neural network were performed with XRD (0002) peak data. After training a network, the temperature of substrate was evaluated as the most important parameter by sensitivity analysis and response surface. As a result, neural network could capture nonlinear and complex relationships between process parameters and predict structural properties of ZnO thin films with a limited set of experiments.

• 한국세라믹학회지
• /
• 제20권4호
• /
• pp.347-355
• /
• 1983

A batch mixture was prepared as 16mol% CaO-84mol% $ZrO_2$ of regeant-grade powder. The monoclinic Zirconia powder had an average particle size of $9.24 \mu\textrm{m}$ and calcium carbonate powder had a reported purity of 99.7 weight percent and mean particle size of TEX>$24, 37<\mu\textrm{m}$. The specimens were fired at 1400, 1500, 1650 and $1750^{\circ}C$ for 0. 3, 5 and 7 hours respectively. After fired the specimens were investigated using Scaning electron microscopy. Density Porosity Compressive strength Modulus of rupture and Thermal expansion were measured X-ray diffration analysis was also carried out. The results are as follows ; 1) As the firing temperature or soaking time was increased firing linear shrinkage apparent density compressive strength and modulus of rupture increased but apparent porosity decreased, 2) Cubic and monoclinic Zirconia was found at $1400^{\circ}C$ and cubic Ziconia found above $1500^{\circ}C$ 3) The specimens fired at 140$0^{\circ}C$ without soaking display thermal expansion curves by monoclinic〓tetragonal transformation and no tranformation was found at $1400^{\circ}C$ for 5hrs and above $1500^{\circ}C$. 4) The lattice parameter had constant value of 5.1345 $\AA$ through all the ranges of firing temperature 5) The higher the firing temperature was or the longer the soaking time was the larger the grain size was.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.241-248
• /
• 2003

Biaxially textured Ni tapes were fabricated by a cold working and recrystallization heat treatment processes from powder compact rods. The processing parameters associated with the cube texture formation in Ni tapes were systematically investigated by using X-ray diffraction and pole-figure analysis. The Ni powder used in this study was 5 $\mu$m in size and 99.99% in purity. To find the optimum sintering temperature, tensile tests were performed for Ni rods sintered at various temperatures. The Ni rods sintered at 100$0^{\circ}C$ showed poor elongation and low fracture strength, while the Wi rods sintered above 100$0^{\circ}C$ revealed good mechanical properties. The higher elongation and fracture strength of the Ni rods sintered at higher temperatures than 100$0^{\circ}C$ are attributed to the full densification of the sintered rods. The sintered Ni rods were cold-rolled with 5% reduction to the final thickness of 100 $\mu$m and then annealed for development of rube texture in rolled Ni tapes. The annealed Ni tapes depicted strong cube texture with FWHM(full-width at half-maximum) of in-plane and out-of-plane in the range of 8$^{\circ}$ to 10$^{\circ}$. The NiO deposited on the Ni tapes by MOCVD process showed good epitaxy with FWHM=10$^{\circ}$, which indicates that the Ni tapes can be used as a substrate for YBCO coated conductors.

• Journal of Astronomy and Space Sciences
• /
• 제31권4호
• /
• pp.317-323
• /
• 2014

Odyssey, one of the NASA's Mars exploration program and SELENE (Kaguya), a Japanese lunar orbiting spacecraft have a payload of Gamma-Ray Spectrometer (GRS) for analyzing radioactive chemical elements of the atmosphere and the surface. In these days, gamma-ray spectroscopy with a High-Purity Germanium (HPGe) detector has been widely used for the activity measurements of natural radionuclides contained in the soil of the Earth. The energy spectra obtained by the HPGe detectors have been generally analyzed by means of the Window Analysis (WA) method. In this method, activity concentrations are determined by using the net counts of energy window around individual peaks. Meanwhile, an alternative method, the so-called Full Spectrum Analysis (FSA) method uses count numbers not only from full-absorption peaks but from the contributions of Compton scattering due to gamma-rays. Consequently, while it takes a substantial time to obtain a statistically significant result in the WA method, the FSA method requires a much shorter time to reach the same level of the statistical significance. This study shows the validation results of FSA method. We have compared the concentration of radioactivity of $^{40}K$, $^{232}Th$ and $^{238}U$ in the soil measured by the WA method and the FSA method, respectively. The gamma-ray spectrum of reference materials (RGU and RGTh, KCl) and soil samples were measured by the 120% HPGe detector with cosmic muon veto detector. According to the comparison result of activity concentrations between the FSA and the WA, we could conclude that FSA method is validated against the WA method. This study implies that the FSA method can be used in a harsh measurement environment, such as the gamma-ray measurement in the Moon, in which the level of statistical significance is usually required in a much shorter data acquisition time than the WA method.

• 한국식품위생안전성학회지
• /
• 제19권4호
• /
• pp.203-208
• /
• 2004

꼬막, 참굴, 바윗굴 및 가리비 등 폐기되는 몇 종의 패각류를 이용하여 칼슘 보강용 식품 첨가제의 원료로써 사용 할 수 있는 고순도의 탄산칼슘을 제조하고자 하였다. 꼬막 패각을 $900^{\circ}C$에서 5시간 회화한 회화분의 칼슘 함량이 $64.9\%$로 가장 높게 나타났으며, 가리비 $62.5\%$, 참굴 $62.4\%$, 바윗굴 $61.5\%$ 순이었다 백색도는 가리비 패각 회화분의 경우 81.6-85.8로서 패각류 중 가장 높았다. 꼬막 패각 회화분$(Ca\;39.92\%)$에 ammonium chloride process(ACP)와 ammonium nitrate process(ANP)법을 적용하여 제조한 $CaCO_3$의 Ca 함량은 $40.03-40.04\%$로 높아졌고, ANP법에 의해 제조한 pH 조정 시료의 경우가 $40.04\%$로서 가장 높았으며, 이 방법들에 의해 불순물이 거의 대부분 제거되는 것으로 나타났다. ACP법과 AMP법에 의해 제조한 $CaCO_3$의 백색도는 101.0-101.5로 매우 우수하였으며, 칼슘보강용 식품첨가제로서 사용될 가능성이 충분하다고 판단된다.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.62-69
• /
• 2009

반도체 웨이퍼 제조 공정 중 발생하는 질산, 불산, 초산으로 구성된 혼합폐산을 재활용하기 위한 연구를 수행하였다. 초기에 $NaNO_3$와 Si powder를 사용하여 불산을 $Na_2SiF_6$로 침전시켜 불소화합물을 제조하였고, 이 때 혼산 중 불산의 농도는 초기 127g/L에서 0.5g/L로 낮아져 불산 회수율은 99.5%였다. $Na_2SiF_6$ 제조 후 남은 혼산의 질산과 초산의 농도는 각각 502g/L, 117g/L였고, 이 혼산에 NaOH를 투입하여 pH=4로 맞춘 후 -440 mmHg, $95^{\circ}C에서 증발농축을 하여 초산 분리 회수하였다. 회수된 초산의 농도는 약 15%였고, 회수율은 85.3% 이상이었다. 또한, 농축여액을 $20^{\circ}C$까지 냉각하여 $NaNO_3$ 결정을 석출시킴으로 질산나트륨을 제조하였고, 그 회수율은 약 93%이상이었다. 제조된 $Na_2SiF_6$와 $NaNO_3$를 $90^{\circ}C$에서 건조시킨 후, XRD 분석한 결과, 순수 $Na_2SiF_6$와 $NaNO_3$만 합성된 것을 확인하였고, 그 순도는 각각 약 97%, 98%로 시판용과 유사하였다.

• Journal of Microbiology and Biotechnology
• /
• 제27권7호
• /
• pp.1281-1287
• /
• 2017

Bone morphogenetic protein-4 (BMP-4) is considered to have therapeutic potential for various diseases, including cancers; however, the high expression of biologically active recombinant human BMP-4 (rhBMP-4) needed for its manufacture for therapeutic purposes has yet to be established. In the current study, we established a recombinant Chinese hamster ovary (rCHO) cell line overexpressing rhBMP-4 as well as a production process using 7.5-l bioreactor (5 L working volume). The expression of the mature rhBMP-4 was significantly enhanced by recombinant furin expression. The combination of a chemically defined medium and a nutrient supplement solution for high expression of rhBMP-4 was selected and used for bioreactor cultures. The 11-day fed-batch cultures of the established rhBMP-4-expressing rCHO cells in the 7.5-L bioreactor produced approximately 32 mg/l of rhBMP-4. The mature rhBMP-4 was purified to homogeneity from the culture supernatant using a two-step chromatographic procedure, resulting in a recovery rate of approximately 55% and a protein purity greater than 95%. The N-terminal amino acid sequences and N-linked glycosylation of the purified rhBMP-4 were confirmed by N-terminal sequencing and de-N-glycosylation analysis, respectively. The mature purified rhBMP-4 has been proved to be functionally active, with an effective dose concentration of $EC_{50}$ of 2.93 ng/ml.

• Journal of Plant Biotechnology
• /
• 제43권4호
• /
• pp.457-465
• /
• 2016

핵심 microsatellite 마커를 활용하여 우리나라에서 품종보호출원 및 등록된 콩 148 품종에 대한 DNA 프로파일 데이터베이스를 구축한 다음 유전적 유사도 분석을 통한 품종 식별력 정도를 조사하였다. 콩 148품종을 120개의 microsatellite 마커로 검정하고 밴드의 패턴이 명확하고 다형성 정도가 높은 핵심 마커 16개의 대립유전자의 수는 6 ~ 28개로 나타났고 평균 대립유전자의 수는 12.75개였다. PIC 값은 0.753 ~ 0.951 사이에 분포하였고 평균값은 0.863으로 아주 높았다. 콩 148 품종에 대하여 Jaccard 방법에 따라 유전적 유사도를 설정한 다음 비가중 산술평균결합에 의해 집괴분석하여 계통도를 작성하였을 때, 콩의 품종 유형 및 품종 육성 계보에 따라 5개의 대그룹으로 나누어졌으며 모든 품종이 식별이 가능하였다. 본 연구에서 콩 품종식별용 핵심 microsatellite는 품종보호출원 품종의 구별성, 균일성, 안정성의 확인, 품종진 위성과 관련된 종자분쟁, 종자 순도 관리에 매우 유용하게 활용될 수 있을 것이다.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.489-493
• /
• 2012

Green phosphors $K_2BaW_2O_8:Tb^{3+}$(1.0 mol%) were synthesized by solid state reaction method. Differential thermal analysis was applied to trace the reaction processes. Three endothermic values of 95, 706, and $1055^{\circ}C$ correspond to the loss of absorbed water, the release of carbon dioxide, and the beginning of the melting point, respectively. The phase purity of the powders was examined using powder X-ray diffraction(XRD). Two strong excitation bands in the wavelength region of 200-310 nm were found to be due to the ${WO_4}^{2-}$ exciton transition and the 4f-5d transition of $Tb^{3+}$ in $K_2BaW_2O_8$. The excitation spectrum presents several lines in the range of 310-380 nm; these are assigned to the 4f-4f transitions of the $Tb^{3+}$ ion. The strong emission line at around 550 nm, due to the $^5D_4{\rightarrow}^7F_5$ transition, is observed together with weak lines of the $^5D_4{\rightarrow}^7F_J$(J = 3, 4, and 6) transitions. A broad emission band peaking at 530 nm is observed at 10 K, while it disappears at room temperature. The decay times of $Tb^{3+}$ $^5D_4{\rightarrow}^7F_5$ emission are estimated to be 4.8 and 1.4 ms, respectively, at 10 and 295 K; those of the ${WO_4}^{2-}$ exciton emissions are 22 and 0.92 ${\mu}s$ at 10 and 200 K, respectively.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.38-43
• /
• 2009

수산화알루미늄을 원료물질로 하여 알루미늄 유기화합물인 aluminum oxalate 합성실험을 수행하였다. 이를 위해 국산 99.7% 순도의 수산화알루미늄을 옥살산으로 용해하는 방법으로 알루미늄 수용액을 제조하였으며, 실험결과 옥살산 농도 1.0 mole/l, 반응온도 $90^{\circ}C$에서 16시간 용해시 거의 100%에 가까운 용해율을 얻을 수 있었다. 알루미늄 수용액으로부터 aluminum oxalate를 합성하기 위해서는 ethanol/Al solution 혼합비율을 2.0이상으로 유지하여야 하는 것으로 나타났다. 또한, 90% 이상의 회수율을 얻기 위해서는 혼합액의 pH를 8.2이상으로 조절하여야 하는 것으로 나타났다. 합성반응을 통해 얻은 aluminum oxalate의 화학분석결과 $NH_4$ 14.5%, Al 7.18% 및 C 17.4%이었으며, 이의 화학식은 $(NH_4)_3Al(C_2O_4)_3$ $3H_2O$임을 확인할 수 있었다.