• Parasites, Hosts and Diseases
• /
• v.32 no.4
• /
• pp.243-248
• /
• 1994

Plasma membrane proteins of a Korean isolate of Trichomonus vofinalis HY-1 were fractionated for antigen analysis. Homogenates of T. vaginalis were fractionated by the differential centrifugation using sucrose step-gradient method. The interface layer from the 25%/45% sucrose was collected as a plasma membrane fraction and its purity was examined by transmission electron microscopy. The antigenicity of plasma membrane fraction was analysed by enzyme-linked immunoelectrotransfer blot technique with immune rabbit serum and compared with surface antigen labelled with N. hydroxysuccinimide-biotin. The fluffy fraction of 25%/45% sucrose interface was homogeneous and membrane particles were present as extended sheet and concentric vesicles showing typical trilamellar appearance under transmission electron microscope. Seven fractions at 40, 50, 60, 110, 130, 140 and 150 kDa were identified as the antigenic membrane proteins in EITB with anti HY-1 rabbit serum. The common band at 60 kDa was detected both in antigenic fractions of plasma membrane and surface protein labelled with NHS-biotin. This result indicates that this protein is considered as a major surface antigen of T. vaginalis. The role of this surface antigen at 60 kDa should be studied further.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.526-531
• /
• 2001

LD slag, that is, a by-product of steel making process, has been mainly used as land construction materials. Recently, the seashore application of LD slag was tried in Japan and Korea tut the reaction between LD slag and seawater was not studied yet. We tried to clarify the leaching reaction and/or mechanism of LD slag and the reaction between seawater and LD slag. We tried to apply these results to the decarbonization of seawater for seawater magnesia process. At first, LD slag was milled and classified into 5 grades, that is, (ⅰ)45${\mu}{\textrm}{m}$ under, (ⅱ)0.25~0.5mm (ⅲ)0.5~1mm(ⅳ)1~2mm, (ⅴ)2.36~3.35mm. These slags were leached in the distilled water. In case of 45${\mu}{\textrm}{m}$ under, the pH of the leached solution was over 12. The chemical analysis of leached solution showed that the $Ca^{+}$$^2$was main component and the S $i^{+}$$^4$was very low. On the other hand, the content of S $i^{+}$$^4$in leached solution was decreased with the increase of pH of this solution. The nearly pure calcium solution was made and the ultra high purity MgO could be made with this calcium solution. The leaching behavior of LD slag was different between the fine particle and coarse particle. The calcium was leached by bulk dissolution in the coarse particle and by surface controlled reaction in fine particle. The leaching rate was slow in coarse particle and fast in fine particle. Therefore, the high pH solution, that is, over 12, was obtained in fine particle.cle.e.

• Journal of Ginseng Research
• /
• v.35 no.4
• /
• pp.487-496
• /
• 2011

Good manufacturing practice (GMP)-based quality control is an integral component of the common technical document, a formal documentation process for applying a marketing authorization holder to those countries where ginseng is classified as a medicine. In addition, authentication of the physico-chemical properties of ginsenoside reference materials, and qualitative and quantitative batch analytical data based on validated analytical procedures are prerequisites for certifying GMP. Therefore, the aim of this study was to propose an authentication process for isolated ginsenosides $Rb_1$ and $Rg_1$ as reference materials (RM) and for these compounds to be designated as RMs for ginseng preparations throughout the world. Ginsenoside $Rb_1$ and $Rg_1$ were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of the isolated ginsenosides was made according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantitation, and mass balance tests. The isolated ginsenosides were proven to be a single compound when analyzed by three different HPLC systems. Also, the water content was found to be 0.940% for $Rb_1$ and 0.485% for $Rg_1$, meaning that the net mass balance for ginsenoside $Rb_1$ and $Rg_1$ were 99.060% and 99.515%, respectively. From these results, we could assess and propose a full spectrum of physicochemical properties for the ginsenosides $Rb_1$ and $Rg_1$ as standard reference materials for GMP-based quality control.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.550-558
• /
• 2015

To analyze the linkage relationships among molecular markers recently reported to be linked to onion (Allium cepa L.) Ms, a restorer-of-fertility locus, in onion (Allium cepa L.), three single nucleotide polymorphism markers were converted into cleaved amplified polymorphic sequence (CAPS) markers based on onion transcriptome sequences and the rice genome database. Analysis of the recombinants selected from 4,273 segregating plants using CAPS and other linked markers demonstrated the jnurf13 and jnurf610 markers to perfectly co-segregate with the Ms locus. In contrast to jnurf13, the jnurf610 marker was not in perfect linkage disequilibrium with the Ms locus in diverse breeding lines. Thus, the jnurf13 marker and the marker for identification of cytoplasm types were utilized to enhance the efficiency of onion breeding through four applications. First, 89 maintainer lines containing the normal cytoplasm and homozygous recessive Ms genotypes were successfully identified from 100 breeding lines. Second, these two molecular markers were used to analyze the main sources of male-fertile contaminants frequently found in the male-sterile parental lines during F1 hybrid seed production. The majority of the contaminants contained heterozygous Ms genotypes, indicating that pollen grains harboring the dominant Ms genotype may have been introduced during propagation of the maintainer lines. Therefore, the genetic purity of the two maintainer lines was analyzed in the third application, and the results showed that both maintainer lines contained 13-21% off-types. Finally, the two markers were used to increase the seed yield potentials of two open-pollinated varieties containing sterile cytoplasms by removing the plants harboring homozygous recessive and heterozygous Ms genotypes.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.44-53
• /
• 1994

A study on the iron electrode which is a good material for alkaline battery because of its superior characteristics including high theoretical capacity density, low toxicity, low cost and inexhaustible supply was performed to develop high performance nickel-iron secondary battery. The characteristics of chrage-discharge reaction were examined by cyclic voltammetry technique SEM and XRD analysis. The capacity of the test electrodes was determined by the costant current charge-discharge method. It was found that the purity and particle size of iron material were the major determinant factors of electrode capacity. With the addition of $Na_2S$ into the electrolyte the capacity of electrode was increased about 20 % caused by the prevention of passivation and the increase of hydrogen overpotential. The stability and capacity of electrode were increased with the use of Ni-fibrex and foamed Ni collectors and also depended on the sintering temperature. The capacity of electrode was 350 mAh/g(0.2 C) which corresponded to 36% utility.

• Journal of the Korean Chemical Society
• /
• v.15 no.4
• /
• pp.191-197
• /
• 1971

Ruthenium content in highly purified palladium metal (99.9%) was determined by counting $^{105}Rh$ nuclide which was produced by $^{104}Ru(n,{\gamma};{\beta}^-)^{105}Rh$ nuclear reaction. Palladium sample and ruthenium standard were irradiated by neutron with the Pneumatic Transfer System of TRIGA MARK II reactor. Palladium and ruthenium were dissolved by treating with aqua-regia and by fusing with sodium peroxide flux respectively. $^{105}Rh$ was separated through anion and cation exchange resin columns. The ruthenium content was determined by comparing the $^{105}Rh$ activities, obtained from the palladium sample, with that from pure ruthenium standard. The detection limit of ruthenium by the present method is about 1 ppm of ruthenium in 10 mg of palladium, which is approximately 40 times more sensitive than that of the conventional radioactivation method which employs $^{102}Ru(n,{\gamma})^{103}Ru$ nuclear reaction.

• Resources Recycling
• /
• v.18 no.4
• /
• pp.38-43
• /
• 2009

The synthesis of aluminum oxalate, one of the aluminum organic compounds, has been performed using aluminum hydroxide as a raw material. For this aim, domestic aluminum hydroxide of 99.7% purity was dissolved by oxalic acid to produce an aqueous aluminum solution. As a result, it was found that aluminum hydroxide could be dissolved almost completely by the reaction with 1.0 mole/l oxalic acid solution at $90^{\circ}C$ for 16 hr. It was strongly required to keep the ratio of ethanol/Al solution more than 2.0 for the synthesis of aluminum oxalate from the aluminum solution. Furthermore, the pH should be controlled to be more than 8.2 in order to obtain the recovery of aluminum oxalate higher than 90%. From the chemical analysis of aluminum oxalate prepared in this work, the content of $NH_4$, Al and C was found to be 14.5, 7.18 and 17.4%, respectively. Accordingly, the aluminum oxalate synthesized from the aluminum solution was confirmed to be $(NH_4)_3Al(C_2O_4)_3$ $3H_2O$.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.534-538
• /
• 1991

A procedure for spectrophotometric determination of traces of boron in high-purity trichlorosilane (TCS) is proposed utilizing an adsorptive separation. NaCl is chosen as an Lewis base adsorbent which forms a complex with boron compounds in TCS, and is well dissolved in sulfuric acid-quinalizarin color-forming agent without causing an interference in colorimetric measurements. The proposed adsorptive separation method is free from the formation of silica gel and gas bubbles during the analysis of TCS. The method reveals that the boron concentration in a semiconductor grade TCS is 6.1 ${\mu}$g/l within the standard deviation of ${\pm}$20%. On the other hand, the boron concentration of the purified TCS which is separated from NaCl-boron compounds complex is reduced to 0.2 ${\mu}$g/l, showing the efficient applicability of NaCl to the adsorptive separation. The effectiveness of NaCl for the removal of boron in TCS purification is also described in comparison with other well-known adsorbents.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.1
• /
• pp.110-117
• /
• 2008

Three kinds of prenylated flavonols, icariside I, icariside II, and icaritin, were isolated from an icariin hydrolysate and their effects on melanogenesis evaluated based on mushroom tyrosinase inhibition and quantifying the melanin contents in melanocytes. Although none of the compounds had an effect on tyrosinase activity, icariside II and icaritin both effectively inhibited the melanin contents with an $IC_{50}$ of 10.53 and $11.13{\mu}M$, respectively. Whereas icariside II was obtained from a reaction with ${\beta}$-glucosidase and cellulase, the icariin was not completely converted into icariside II. Thus, for the high-purity production of icariside II, the reaction was optimized using the response surface methodology, where an enzyme concentration of 5.0mg/ml, pH 7, $37.5^{\circ}C$, and 8 h reaction time were selected as the central conditions for the central composite design (CCD) for the enzymatic hydrolysis of icariin into icariside II using cellulase. Empirical models were developed to describe the relationships between the operating factors and the response (icariside II yield). A statistical analysis indicated that all four factors had a significant effect (p<0.01) on the icariside II production. The coefficient of determination $(R^2)$ was good for the model (0.9853), and the optimum production conditions for icariside II was an enzyme concentration of 7.5mg/ml, pH 5, $50^{\circ}C$, and 12 h reaction time. A good agreement between the predicted and experimental data under the designed optimal conditions confirmed the usefulness of the model. A laboratory pilot scale was also successful.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.116-122
• /
• 2012

The purpose of this study is to investigate the overall spray behavior characteristics for various injection conditions in a gasoline direct injection(GDI) injector with multi-hole. The spray characteristics, such as the spray penetration, the spray angle, and the injection quantity, were studied through the change of the injection pressure, the ambient pressure, and the energizing duration in a high-pressure chamber with a constant volume. The n-heptane with 99.5% purity was used as the test fuel. In a constant volume chamber, the injected spray was visualized by the spray visualization system, which consisted of the high-speed camera, the metal-halide lamp, the injector control device, and the image analysis system with the image processing program. It was revealed that the injection quantity was mainly affected by the difference between the injection pressure and the ambient pressure. For low injection pressure conditions, the injection quantity was decreased by the increase of the ambient pressure, while it nearly maintained regardless of the ambient pressure at high injection pressure. According to the increase of the ambient pressure in the constant volume chamber, the spray development became slow, consequently, the spray tip penetration decreased, and the spray area increased. In additions, the circular cone area decreased, and the vortex area increased.