• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.69-78
• /
• 2014

PURPOSES : The purpose of this paper is showing that the state of pavement sublayers can be evaluated differently according to direction of FWD. METHODS : The concrete pavement slabs above subgrade without anything, subgrade with cavity, and box culvert were modeled by finite element method(FEM). The modeled pavements were analyzed by changing the direction of falling weight deflectometer(FWD). The deflection results obtained from FEM were used to calculate radius of relative stiffness and composite modulus of subgrade reaction using AREA method. Then, the analyzed results were compared to the results of the test performed at the Korea Expressway Corporation(KEC) test road. RESULTS : The composite modulus of subgrade reaction increased with subgrade elastic modulus, while radius of relative stiffness decreased. The pavement sections of pure earth showed the consistent results regardless of FWD direction. In case there was cavity, the radius of relative stiffness was larger and composite modulus of subgrade reaction was smaller when FWD was leaving the cavity than when approaching the cavity. This pattern became clear when the cavity got larger. In case of the section with box culvert, the pattern was opposite to the case of cavity. When the soil cover depth increased, the effect of box culvert got smaller. When the load was applied far from the cavity and box culvert, the effect was also declined. The test performed at the KEC test road showed identical results to those of finite element analysis. CONCLUSIONS : The direction of FWD should be considered in evaluation of the state of pavement sublayers because it can be evaluated differently even under identical condition.

• 천문학회지
• /
• 제43권5호
• /
• pp.161-168
• /
• 2010

Magnetars are neutron stars possessing a magnetic field of about $10^{14}-10^{15}$ G at the surface. Thermodynamic properties of neutron star matter, approximated by pure neutron matter, are considered at finite temperature in strong magnetic fields up to $10^{18}$ G which could be relevant for the inner regions of magnetars. In the model with the Skyrme effective interaction, it is shown that a thermodynamically stable branch of solutions for the spin polarization parameter corresponds to the case when the majority of neutron spins are oriented opposite to the direction of the magnetic field (i.e. negative spin polarization). Moreover, starting from some threshold density, the self-consistent equations have also two other branches of solutions, corresponding to positive spin polarization. The influence of finite temperatures on spin polarization remains moderate in the Skyrme model up to temperatures relevant for protoneutron stars. In particular, the scenario with the metastable state characterized by positive spin polarization, considered at zero temperature in Phys. Rev. C 80, 065801 (2009), is preserved at finite temperatures as well. It is shown that, above certain density, the entropy for various branches of spin polarization in neutron matter with the Skyrme interaction in a strong magnetic field shows the unusual behavior, being larger than that of the nonpolarized state. By providing the corresponding low-temperature analysis, we prove that this unexpected behavior should be related to the dependence of the entropy of a spin polarized state on the effective masses of neutrons with spin up and spin down, and to a certain constraint on them which is violated in the respective density range.

• 조형예술학연구
• /
• 제2권
• /
• pp.193-221
• /
• 2000

The postmodern culture since the later 20C breaks downa tradition a relation between the reality and languages or sign images expressing it. It develops in the way to review the meaning on the object's imitation or the representation to have been followed since Plato and represent the new state and concept of expressed things. Also, The visual art leads an change of paradigm by images giving up the visual resemblance or the function of representation and endowing them with the new sense. This essay has a purpose to study an important discussion about this change centered on Baudrillard and Lacan. A sociologist Baudrillard promotes the concept of 'simulation' through detecting the reality and the social and historical state of the image. Studying on the course of this change, he calls the step that the image escapes from the stage to reflect the reality and become the pure imitation by itself simulation. The image in the stage of simulation is called 'hyperreality' because it doesn't have any an indicator or a substitute and happens by models without the original or the reality. So he asserts that art is not to contain some absoluteness or transcendency as the past, but to be as the spectacle with characteristics of meaningless, emptiness, contingency. Lacan dismantles the concept of the absolute Cogito to have become the center of the western ideology, and creates the concept of 'Other'. He concludes also the reality exists but can't be captured, and it's impossible for the thinking subject can reach it. The concept of new image which can be thought as the Symbolic in Lacan is 'Signifier without Signified' since it isn't possible to be the transcendent Signifier fixing the meaning finally in it. His 'Gaze' theory is which to be emitted in other's area determines the subject. Equally Baudrillard and Lacan sets up the new state of the image through the end of representation system As for Baudrillard, art intends to the worthlessness and is nothing but imagination. But in Lacan a picture represents the subject being in process by the dialectic of desire.

• 한국중재학회지:중재연구
• /
• 제32권2호
• /
• pp.85-114
• /
• 2022

When human rights disputes are related to the cross-border investments treaties, the investment arbitral tribunals are confronted with the question of how to adjudicate connected human rights violations. The traditional structure restricts arbitration proceedings to the parties named within an investment treaty, i.e., Investor-Claimant and State-Respondent. If human rights issues occur, States must act as proxies for citizens with human rights claims. This effectively excludes individuals or groups with human rights concerns and contradicts the premise of international human rights law that seeks to empower human rights-holders to pursue claims directly and on an international stage. The methods for intorducing human rights issues in the context of investment arbitration proceedings are suggested as follows: First, human rights arguments can be introduced into ISDS by the usual initiator of investment disputes: the investor as the complainant. Especially, if the jurisdictional and applicable law clauses of the respective international investment agreements are sufficiently broad to include human rights violations, adjudicating a pure human rights claim could be possible. Second, the host state may rely on human rights argumentation as a respondent of an investor claim. Human rights have played a role as a justification for state measures undertaken to comply with human rights laws. Third, third party interventions by NGOs and civil society groups as amici curiae may act as advocates for affected populations or communities in response to the reluctance of governments to introduce their own human rights duties into the investment dispute. Finally, arbitrators have also referred to human rights ex officio, i.e., without having a dispute party referring to the specific argument. This was mainly the case in the context of determining the scope of property rights and the existence of an expropriation. As all U.N. member states have human rights obligations, international investment laws must be presumed to be in conformity with the relevant human rights obligations.

• Corrosion Science and Technology
• /
• 제12권1호
• /
• pp.40-49
• /
• 2013

Effects of magnesium and pH on corrosion of aluminum galvanically coupled to iron have studied by using potentio- dynamic and static tests for polarization curves, Mott-Schottky test for analysis of semiconductor property, and GD-AES and XPS for film analysis. Pitting potential was sensitive to magnesium as an alloying element but not to pH, while passive current was sensitive to pH but not to magnesium. It was explained with, instead of point defect model (PDM), surface charge model describing that the ingression of chloride depends on the state of surface charge and passive film at film/solution interface is affected by pH. In addition, galvanic current of aluminum electrically coupled to iron was not affected by magnesium in pH 8.4, 0.2M citrate solution but was increased by magnesium at the solution of pH 9.1. The galvanic current at pH 9.1 increased with time at the initial stage and after the exposure of about 200 minute, decreased and stabilized. The behavior of the galvanic current was related with the concentration of magnesium at the surface. It agreed with the depletion of magnesium at the oxide surface by using glow discharge atomic emission spectroscopy (GD-AES). In addition, pitting potential of pure aluminum was reduced in neutral pH solution where chloride ion maybe are competitively adsorbed on pure aluminum. It was confirmed by the exponential decrease of pitting potential with log of [$Cl^-$] around 0.025 M of [$Cl^-$] and linear decrease of the pitting potential. From the above results, unlike magnesium, alloying elements with higher electron negativity, lowering isoelectric point (ISE), are recommended to be added to improve pitting corrosion resistance of aluminum and its alloys in neutral solutions as well as their galvanic corrosion resistance in weakly basic solutions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.139.1-139.1
• /
• 2016

Multiferroic materials are of great interest because of its potential applications in the design of devices combining magnetic, electronic and optical functionalities. Among various multiferroic materials, $BiFeO_3$(BFO) is known to be one of the intensively focused mainly due to the possibility of multiferroism at device working temperature (> $200^{\circ}C$). However, leakage current and weak polarization resulting from oxygen deficiency and crystalline defect should be resolved. Furthermore the magnetic ordering of pure BFO mainly prefers to have antiferromagnetic coupling. Up to now many attempts have been performed to improve the ferromagnetic and the ferroelectric properties of BFO by doping. In this work, we investigated the effects of Ni substitution on the multiferroism of bulk BFO. Four BFO samples (a pure BFO and three Ni-doped BFO's; $BiFe_{0.99}Ni_{0.01}O_3$, $BiFe_{0.98}Ni_{0.02}O_3$ and $BiFe_{0.97}Ni_{0.03}O_3$) were synthesized by the standard solid-state reaction and rapid sintering technique. The XRD results reveal that Ni atoms are substituted into Fe-sites and give rise to phase transition of cubic to rhombohedal. By using vibrating sample magnetometer and standard ferroelectric tester, the multiferroic properties at room temperature were characterized. We found that the magnetic moment of Ni-doped BFO turned out to be maximized for 3% of Ni dopant.

• 대한화학회지
• /
• 제41권1호
• /
• pp.12-17
• /
• 1997

순수 물 및 n-부탄올 수용액에서 Sodium dodecylsulfate(SDS)와 Sodium dodecylbenzenesulfonate(DBS)의 혼합계면활성제가 나타나는 임계미셀농도(CMC*) 및 반대이온들의 결합상수값(B)을 25℃에서 전도도법으로 측정하였다. 이들 CMC* 및 B값들의 α1(SDS의 전체 몰분율조성)에 따른 변화로부터 비이상적 혼합 미셀모델을 적용함으로써 여러가지 열역학적 함수값들(Xi, γi, Ci, aiM, β, ΔHmix 및 ΔGm0)을 계산하였으며, 또한 SDS/DBS혼합계면활성제의 미셀화에 미치는 n-부탄올의 효과를 조사하기 위하여 n-부탄올의 농도(0.1 M, 0.2 M 및 0.3 M)에 따른 이들 열역학함수값들의 변화를 측정하여 순수 물에서의 값들과 서로 비교함으로써 분석하였다.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.71-75
• /
• 2004

The technology of $C_{60}$ fullerite films preparation by means of gas-phase deposition and structure of fullerite films are described. A three-channel flow plant was used to obtain fullerite films. The films were deposited in the flow of inert gas under reduced pressure onto a cooled silicon or sapphire substrate placed inside the reaction chamber of the plant. The plant allows one to obtain the films of pure fullerenes and to synthesise the films from fullerene compounds and doped fullerenes. The structure of two types of films were investigated by FE-SEM and SEM techniques: pure fullerite films onto silicon and sapphire substrates as well as compound films were studied by FE-SEM technique. All samples have shown columnar structure with high level of porosity. The synthesis of films composed of fullerene and its compounds for use in electronics is demonstrated to be promising. For example, experiments confirm the possibility to use fullerite films in sensor electronics to produce humidity and thermal sensors. It is also possible to use the sensitivity of these films to isotropic pressure. The experiments with $C_{60}$-Cu-J films have shown quite strong dependence of their resistance on pressure of different sort of medium-gas that could be used in gas-sensitive sensors. The structure and preparation technology of resistive sensor based on fullerite films are described.bed.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.541-544
• /
• 2006

고장력볼트에 의한 부재연결 방법 중 가장 대표적인 마찰이음은 사용성 측면에서의 한계상태는 미끄러짐이 발생한 상태라고 할 수 있다. 따라서, 한계상태를 고려한 설계를 위해서는 미끄러짐 내력을 정확히 파악할 필요가 있다. 현재 공용중인 강교에서 발생하는 볼트 연결부의 결함 중 볼트 도입축력 부족의 발생빈도가 가장 크지만 도입축력부족에 따른 결함의 연구는 미비한 상태이다. 따라서 본 연구에서는 고장력 볼트 연결부의 미끄러짐 거동을 파악할 수 있는 모델 제시하기 위하여 범용 유한요소 구조해석 프로그램인 LUSAS를 이용하여 수치해석을 실시하였고, 오직 축력만이 작용하는 표준 시험체와 교량보다 비교적 구조계가 간단한 단순경간 강상형교를 모사한 full-size의 H-Beam시험편을 설계하여 설계볼트 도입축력 100%인 시험편의 도입축력을 기준으로 75%, 50%, 25%의 축력을 도입하여 정적 시험을 실시하여 마찰 문제로 인한 고장력 볼트 연결부의 내력을 수치해석한 결과와 비교 분석하고자 한다.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.151-157
• /
• 2018

In this study, the compound $Li_3BO_3$ (LBO) is intended to be prepared by a polymeric complex method as a sintering aid for the densification of $Li_7La_3Zr_2O_{12}$ (LLZ) solid electrolyte. A polymeric precursor containing Li and B is heat-treated in an air atmosphere at a temperature range between $600^{\circ}C$ and $800^{\circ}C$. Instead of LBO, the compound $Li_{2+x}C_{1-x}B_xO_3$ (LCBO) is unexpectedly synthesized after a heat-treatment of $700^{\circ}C$. The effect of LCBO addition on sintering behavior and ion conductivity of LLZ is studied. It is found that the LCBO compound could lead to significant improvements in the densification and ionic conductivity of LLZ compared to pure LLZ. After sintering at $1100^{\circ}C$, the density of the LLZ-12wt%LBO composite is $3.72g/cm^3$, with a high Li-ion conductivity of $1.18{\times}10^{-4}Scm^{-1}$ at $28^{\circ}C$, while the pure LLZ specimen had a densify of $2.98g/cm^3$ and Li-ion conductivity of $5.98{\times}10^{-6}Scm^{-1}$.