• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.94-108
• /
• 2010

The purpose of this study is to provide data for the restoration of 'Yongyun(龍淵)' and 'Hwahongmun(華虹門)' through an investigation of the vicinity of their original landscapes at the time of construction of Hwaseong in Suwon and through tracing the transformative process of the environments of this vicinity. The results are as follows; As identified by 'Yongyunjung(龍淵亭)' and 'Yongdugak(龍頭閣)', other names of Yongyun, 'Banghwasuryujung(訪花隨柳亭)', which was built on 'Yongduam', is a facility whose place identity is highlighted with a sense of unity with Yongyun. The south lakefront of Yongyun, bordering Banghwasuryujung, has boundaries that make the best use of the natural geographical features of Yongduam while the current circumference of Yongyun is comparatively shorter than its original state. The size of 'Joongdo(中島)', however, seems to be an example of apparent over-design complement and reorganize 'Joongdo', which had been restored larger than its original state at the time of restoration in the 1970s. The depth of 'Yongyun' was created to be lower than the actual depth, without consideration for its initial depth, as soil was accumulated through continuous flooding after it was created. It is assumed that the original drains which were installed about 10m inside the lake were created facing the stream. As regards the planting environment, a circular planting of willows was made in the outskirts of 'Yongyun', except the 'Yongduam' which is a pure forest, and a mix of 'Pinus densiflora', shrubbery and deciduous broad leaf trees was planted in 'Joongdo'. Of the plants growing in the area of this study, plant species introduced to Korea after Hwaseong was constructed are found, most of which provide interest and attraction. The old pine trees growing in a group once grew in the castle areas of the vicinity even in the 1920s, the period of Japanese occupation, but they disappeared from the area in the aftermath of subsequent urban development and the Korean War. Although restored to the site, the number and space taken up by these trees are insignificant compared to those of the original environment. On the basis of these results, the following is considered necessary for the true restoration of the vicinity of 'Yongyun' and 'Hwahongmun': First, the grounds of 'Yongyun' should be dredged deeply enough to expose the bedrock and should be recreated in the rough outline of a half moon by extension to the southwest toward 'Yongduam' and 'Hwahongmun', and the size of 'Joongdo' should be significantly reduced. Secondly, considering that most plant species, except the pine trees and wild trees in 'Yongduam', are non-native plants introduced in order to provide such attractions such as the appreciation of scenic areas, they should be replaced with native species, mainly with the pine trees which were utilized during the construction of Hwaseong. The weeping willows planted in the 'middle-island' should be relocated to the outskirts of 'Yongyun', and replaced with pine trees as the major trees and maple trees or deciduous broadleaf trees to fill in the gaps. Thirdly, exotic species such as the 'Pinus rigida' planted in a group around 'Banghwasuryujung' and 'Bugammun' and 'Pinus strobus' planted in the vicinity of Hwahongmun' should be removed.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.451-466
• /
• 2009

While substorms are known to generally occur under southward IMF conditions, they can sometimes occur even under northward IMF conditions. In this paper, we studied the substorms that occurred in May, 2000 to 2002 to examine some statistical characteristics of the IMF and solar wind associated with northward IMF substorms. We focused on the cases where two or more substorms occurred successively under northward IMF conditions. Also, by checking Sym-H index associated with each of the substorms we determined whether or not there is any association of such northward IMF substorm occurrence with storm times. We also examined statistical properties at geosynchronous altitude in terms of magnetic field dipolarization and energetic particle injection. The following results were obtained. (i) Most of the northward IMF substorms occurred under average solar wind conditions. The majority of them occurred within 2 hrs duration of northward IMF Bz state, but there are also a nonnegligible number of substorms that occurred after a longer duraiton of northward IMF Bz state. (ii) While most of the substorms occurred as isolated from a magnetic storm time, those that occurred in a magnetic storm time show a higher average value of IMF and solar wind than that for the isolated substorms. (iii) About 55% of the substorms were associated with the IMF clock angle that can possibly allow dayside reconnection, and the other 45% were associated with more or less pure northward IMF conditions. Therefore, for the latter cases, the energy input from the solar wind into the magnetosphere should be made by other way than the dayside reconnection. (iv) For most of the substorms, the magnetic field dipolarizations and energetic particle injections at geosynchronous altitude were identified to be generally weak. But, several events indicated strong magnetic field dipolarizations and energetic particle injections.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.14-14
• /
• 2011

W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.109-114
• /
• 2008

The samples were synthesized by using a solid state reaction. The X-ray diffraction pattern for $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ showed a pure rutile phase with tetragonal structure, Mixtures of the proper proportions of the elements sealed in evacuated quartz ampoule were heated at $870{\sim}930^{\circ}C$ for one day and then slowly cooled down to room temperature at a rate of $10^{\circ}C$/h. In order to obtain single phase material, it was necessary to grind the sample after the first firing and to press the powders into pellets before annealing them for a second time in evacuated and sealed quartz ampoule. Magnetic properties have been investigated using the vibrating sample magnetometer (VSM). Room temperature magnetic hysteresis (M-H) curve showed an obvious ferromagnetic behavior and the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $1.5\;{\mu}_B$/CoFe. But the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $0.02\;{\mu}_B$/CoFe without Ti-getter. Size of particles is about $1\;{\mu}m$ using the transmission electron microscope (TEM). The ingredients of sample are distributed irregular in particles. Only Fe get shown on the surface of particles.

• Journal of the Daesoon Academy of Sciences
• /
• v.24_2
• /
• pp.231-270
• /
• 2015

This thesis examined Chu Hsi's self-cultivation theory as the representative theory of cultivation in Confucianism, while juxtaposing it to self-cultivation theory in Daesoon thought, concentrating on its similarity and difference. Neo-Confucianism is a scholarship which has wielded a tremendous influence upon East Asia, while functioning as an official scholarship for long period up to Yuan, Ming, and Ching period, after achieving its synthesis by Chu Hsi. After 13th century, Neo-Confucianism has been a representative academic system in Confucianism, and self-cultivation theory was in its center. It suggested various virtues that classical scholars have to equip to fulfill the sainthood and the politics of royal road. The self-cultivation theory of Chu Hsi was developed upon the basis of the theory 'Li-Qi' and the theory of mind. Here, the practice of Geokyung(morally awakened state with a reverent spirit in every moment) and Gyeokmul-tsiji(reaching into the utmost knowledge through investigation of things) formed a nucleus of Chu Hsi's self-cultivation theory. While Geokyung was to reveal one's true nature through cultivation of mind, Gyeokmul-tsiji was to demonstrate the complete use of mind's essence and function. Chu Hsi's self-cultivation theory attempted to realize the unity of heaven and man, and through cultivating self and governing people, it also tried to achieve its ideal of the society of Great Union(Daedong). Daesoon Thought is originated from Sangjenim who has descended to this world as a human being called Jeungsan. He went on his circuit to rectify the disorder of heaven and earth for 9 years to rectify the Three worlds of heaven, earth and human being which were faced with total annihilation due to its rule of mutual conflict, while creating an earthly paradise. Respecting the will of Sangjenim, Dojunim established the foundation of Do through launching 'Meukeukdo' and setting tenet, creed and object so that the cultivators (Doins) could believe and respect the truth of Sangje's great itineration (Daesoon). Among those, the two components of creed, which are four fundamental principles and the three fundamental attitudes are of great account as precept and cardinal point. Through this means, the cultivators of Daesoonjinrihoe aspire to guard against self-deception through transforming the human spirit, to realize earthly immortality through renewing human beings, and to create an earthly paradise through transforming the world. This thesis attempted to compare and analyze the theory of self-cultivation in Neo-Confucianism and Daesoon Thought in the aspect of ground, method, and object of cultivation. First, as for the ground of cultivation, the doctrines of Chu-tzu and Daesoon thought place the essence of cultivation on 'heaven'. Yet, whereas the former postulates Taekeuk (the Great Ultimate) as a principle as well as the heaven of a natural order, Daesoon thought postulates Sangenim as the heaven of superintendence as well as the heaven of a natural order, signified as its equation of Daesoon with circle, along with the unity of Meukeuk (Endlessness) and Taegeuk (the Great Ultimate). Further, the doctrine of Chu-zhu and Daesoon thought is identical in the point that both thoughts see mind as the subject of cultivation, while trying to restore a pure essence. Nevertheless, whereas Neo-Confucianism intends to give scope to ability of the complete use of mind's essence and function, Daesoon Thought sees mind as the essence which is used by spiritual beings and as an organ that heaven, earth and human being rely upon as the center of the universe. In the aspect of method of cultivation, the doctrine of Chuzhu lays emphasis on the rational factor in that it brightens its 'myung-deoki'(bright inner virtue),' while trying to correspond to the law of heaven on the basis of 'Geokyung' and 'Gyeokmul-tsiji.' On the contrary, Daesoon thought lays much emphasis on faith factor in that it aspires for human perfection based on the restoration of conscience by cultivating Daesoonjinri with sincerity, reverence and faith along with 'quieting the heart-mind', 'quieting the body', 'respecting the God of the Ninth Heaven', and 'observing ritual practice on the basis of the faith in Sangjenim. Yet, both thoughts have similarities in that cultivation of body forms the basis and that they attempt to realize their ideals through cultivation in daily life while taking 'Guarding against self-deception' as the key method of self-cultivation.' However, the principle of Chu-zhu can be said to be a voluntary and autonomous practice based on scripture of the saint as well as self-reflection. On the other hand, Daesoon thought reveals certain difference in that it combines faith factor with one's self-effort by concentrating on cultivation under the presence of Sangjenim as the object of belief and the spirits of heaven and earth. In the aspect of object of cultivation, both thoughts share similarities in that the saint and the perfected gentleman with a moral virtue as an ideal image of men in both thoughts attempt to realize each of their 'myung-deok' in human nature as a heavenly mandate while respecting morality. Further, they also share similarity in the point that the desirable characters in both thoughts want to participate in harmonious creation and nurturance. Yet, the perfected gentleman with a moral virtue is also characterized by its aim for a new heaven and earth where there is no mutual conflict but mutual beneficence, by promoting the moral influence and virtue of Sangjenim over one's own virtue, while practising the mutual beneficence of all life through harmonious union of divine beings and human beings.

• Journal of Life Science
• /
• v.19 no.4
• /
• pp.532-537
• /
• 2009

Previous studies reported that the N-methyl-D-aspartate (NMDA) receptor is related to alcohol dependence in terms of developing withdrawal or tolerance, however, it is controversial whether NMDA receptor antagonists are effective in preventing relapse in alcohol-dependent patients or not. The purpose of this study was to investigate the effect of memantine, an NMDA receptor antagonist, on alcohol intake in C57BL/6 mice, which prefer drinking hereditarily. Using limited access procedures in C57BL/6 mice in the state of alcohol dependence, vehicle, naltrexone 1.0 mg/kg or, memantine 5, 25, or 50 mg/kg i.p. was administered respectively for twelve days. Medication effects on 2-hours alcohol, 22-hour water, and 24-hour food intake and body weight were studied. Using repeated measure ANOVA, the naltrexone 1 mg/kg, memantine 5, 25, or 50 mg/kg, and vehicle groups showed significant medication by day interaction (naltrexone, df=4, F=11.827, p<0.01, memantine 5 mg/kg, df=4, F=7.999, p<0.01; memantine 25 mg/kg, df=4, F=6.199, p<0.05; memantine 50 mg/kg, df=4, F=10.522, p<0.01) in 2-hour alcohol intake. In 3 memantine groups, there was no significant medication by day interaction with the vehicle group in 22-hour water intake, 24-hour food intake, or body weight. The naltrexone and vehicle groups showed significant medication by day interaction in body weight, but not in 22-hour water or 24-hour food intake. From these results, it is suggested that memantine treatment can affect alcohol intake in mice. Therefore, it is possible that a pure NMDA receptor antagonist is effective in preventing relapse in alcohol-dependent patients.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.4
• /
• pp.95-109
• /
• 2013

The practices and processes of HRM (Human Resource Management) for university faculty in Korea depend heavily on assessment of research and teaching rather than the UIC (University-Industry Cooperation) performance. In this regard, HRM of Korean universities is said to be far distant from UIC. Although policy initiatives by the Korean government, notably the MoE (Ministry of Education) have implemented in most universities, the desirable level of UIC could not be achieved yet. Moreover, the very notion of 'university' in Korea is much more to do with 'pure' education and research institution than with 'applied' and 'vocational' purpose. Considering upon HRM practices and organizational culture, for enhancing UIC in Korea, the government's policy should be linked to alter deep-rooted university culture. So the aims of the research are to describe the current state of HRM in Korean and foreign universities; to find out the critical factors of UIC in Korean universities; to analyze the gaps between university research and industrial commercialization based on a conceptual framework, the 'valley of the death'; and to recommend HRM policies fostering UIC for the MoE. For achieving these objectives, we deploy multiple methodologies, namely, in-depth interview, literature survey, and statistical data analysis with regard to UIC. Analyzing the data we have collected, the present research sheds light on all aspects of HRM processes and UICs. And the main policy implication is restricted to the Korean universities, even if we have collected and analyzed foreign universities, notably universities in the USA. The research findings are mainly two folds. Firstly, the HRM practices among Korean universities are very similar due to the legally institutionalized framework and the government's regulations. Secondly, the difficulties of UIC can be explained by notion of the 'valley of death' ways in which both parties of university and industry are looking for different purposes and directions. In order to overcome the gap in the valley of death, the HRM policy is better to be considered as leverage. Finally, the policy recommendations are as follows. Firstly, various kinds of UIC programs are able to enhance the performances of not only UIC, but also education and research outcome. Secondly, fostering organizational climate and culture for UIC, employing various UIC programs, and hiring industry-experienced faculty are all very important for enhancing the high performance of university. We recommend the HRM policies fostering UIC by means of indirect way rather than funding directly for university. The HRM policy of indirect support is more likely to have long-term effectiveness while the government's direct intervention to UIC will have likely short-term effectiveness as the previous policy initiatives have shown. The MEST's policy means of indirect support might vary from financial incentives to the universities practicing HRM for UIC voluntarily, to information disclosure for UIC. The benefits of the present research can be found in suggesting HRM policy for UIC, highlighting the significance of industry-experienced faculty for UIC, and providing statistical analysis and evidences of UIC in Korean universities.

• Archives of design research
• /
• v.16 no.2
• /
• pp.179-188
• /
• 2003

We can discover some facts that vernacular design products with a property of volunteer culture coexist with ready-made products as an useful objects in the post-industrial society. Currently, few attempts had been made at studies of the vernacular design objects with understanding cultural context in post-industrial society, it is necessary to illuminate the relationships between the user with a role of design producer and the product viewed in culturally. In chapter 2, by examining documentary, t have been understood the definition, apprehensions, attributes linking creative use's culture with vernacular design culture, and distinctions between vernacular design and main stream design system. In chapter 3, by verifying products of everyday street and construction site, have been investigated the public characters and the differences compared with the past. In chapter 4, as a subtle example, have been analyzed design feathers and cultural characters of the products which children and infants culture generates by reflecting the socio-economic backgrounds and the culture from 60c and 70c to now according to the phases of the times. In conclusion, first, it seems quite probably that all of artificial objects exist a state of ready-made but that is not appropriate to correspond with user's whole behaviors. supplementally, it causes the phenomenon of vernacular design products. Secondly, it is reasonable to suppose that such main-stream design system and vernacular design go forward continually and crossly with coexistent relationships as high culture and sub culture. Third, three concepts: long-life design, ecology design and recycling revealed in vernacular design are useful distinguishing marks for the future design directions, moreover instant-response, fast and flexible process, three distinctions have a possibility of alternative process which can overcome the control-based process such as the systematic approach and the planning MTG in present. Finally, in children and infants culture, vernacular design products have changed the pure style products in the past into the modified techno playing products in the present. These should De a substitute product that supplyes variousness to ready-made design system and a design culture that maintains continually as a independent culture.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.618-628
• /
• 1998

Pure CaO, Mn-doped CaO, Mn/CaO, and K/CaO catalysts were prepared and tested as catalysts for the oxidative coupling of methane in the temperature range of 600 to 800$^{\circ}C$ to investigate the effects of Mn- and K-addition on the catalytic activity of calcium oxide. To characterize the catalysts, X-ray powder diffraction(XRD), XPS, SEM, DSC, and TG analyses were performed. The catalytic reaction was carried out in a single-pass flow reactor using on-line gas chromatography system. Normalized reaction conditions were generally $p(CH_4)/p(O_2)=250$ Torr/50 Torr, total feed flow rate=30 mL/min, and 1 atm of total pressure with He being used as diluent gas. Among the catalysts tested, 6.3 mol% Mn-doped CaO catalyst showed the best $C_2$ yield of 8.0% with a selectivity of 43.2% at 775$^{\circ}C$. The $C_2$ selectivity increased on lightly doped CaO catalysts, while decreased on heavily doped CaO([Mn] > 6.3 mol%) catalysts. 6 wt.% Mn/CaO and 6 wt.% K/CaO catalysts showed the $C_2$ selectivities of 13.2% and 30.9%, respectively, for the reaction. Electrical conductivities of CaO and Mn-doped CaO were measured in the temperature range of 500 to 1000$^{\circ}C$ at Po2's of $10^{-3}\; to\;10^{-1}\;atm.$ The electrical conductivity was decreased with Mn-doping and increased with increasing $P0_2$in the range of $10^{-3}\;to\;10^{-1}\;atm,$ indicating the specimens to be p-type semiconductors. It was suggested that the interstitial oxygen ions formed near the surface can activate methane and the formation of interstitial oxygen ions was discussed on the basis of solid-state chemistry.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.94-101
• /
• 1989

Transport properties of 2DEG at AlGaAs/GaAs interface such as average electron energy, flight distance, each valley occupancy ratio, average electron velocity for various fields are investigated by MONTE-CARLO method. As the electric field increases, more electrons transit drastically from (000) valley to (000) upper valley. This phenomenon shows the nonstationary effect such as velocity overshoot. The duration of the transient decreases from about 1.4 psec for electric field E = 7KV/cm to about 0.7 psec for 12KV/cm. The average electron velocity during transient transport in 2DEG is about 8 times the steady-state velocity for E = 12KV/cm at room temperature. In comparison with bulk GaAs the peak velocity in the 2DEG is higher than that in even pure bulk GaAs at electric field E = 7 KV/cm. On the basis of the fact that the electrons in the 2DEG have larger peak velocity and shorter transient time of velocity than those in the bulk GaAs, it is suggested that the device with 2DEG may obtain higher mobility than that with bulk GaAs.