• 제목/요약/키워드: pulsed generator

검색결과 102건 처리시간 0.025초

수중에서 펄스초음파 신호에 대한 Sagnac 간섭형 광섬유센서의 특성 연구 (A Study on Characteristics of Sagnac Interferometric Optical Fiber Sensor to Pulsed Ultrasonic Signal in Underwater)

  • 이준호;신대용
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권1호
    • /
    • pp.15-19
    • /
    • 2004
  • In this paper, we present the fabrication and characteristic analysis of Sagnac interferometric optical fiber senior(OFS) system for detecting pulsed ultrasonic signal in underwater. The hollow cylindrical mandrel wound round by single mode optical fiber is used as sensing component. The ultrasonic signal source is simulated by the PZT actuator operated by an function generator. The distance dependency of the OFS's sensitivity was measured. The sensitivity has been shown to be inversely propotional to the square-root of distance between ultrasonic source and sensing component. It has also been shown that the OFS could detect the signals less affected by ultrasonic path comparing to conventional acousto-electric sensor. and accurate location of ultrasonic signal could be carried out using two OFSs.

실내 기류패턴에 따른 급기효율과 배기효율의 분포 (Distributions of Local Supply and Exhaust Effectiveness according to the Room Airflow Patterns)

  • 한화택;최선호;장경진
    • 설비공학논문집
    • /
    • 제13권9호
    • /
    • pp.853-859
    • /
    • 2001
  • A pulsed tracer gas technique is applied to measure distributions of local mean age and residual life time of air in a half-scale experimental chamber. The room airflow patterns are flow-visualized by a Helium bubble generator for three different exhaust locations. A supply slot is located at the top of a right wall, and an exhaust slot is either at bottom-left(Case 1), bottom-right(Case 2), or top-left(Case 3) location. Results show that the distribution of LMA and LMR are different from each other, but both of them are closely related to the airflow pattern in the space. Results on overall room ventilation effectiveness are provided depending upon ventilation airflow rates for three different supply-exhaust configurations.

  • PDF

Benchmarks of subcriticality in accelerator-driven system at Kyoto University Critical Assembly

  • Pyeon, Cheol Ho;Yamanaka, Masao;Kim, Song-Hyun;Vu, Thanh-Mai;Endo, Tomohiro;Van Rooijen, Willem Fredrik G.;Chiba, Go
    • Nuclear Engineering and Technology
    • /
    • 제49권6호
    • /
    • pp.1234-1239
    • /
    • 2017
  • Basic research on the accelerator-driven system is conducted by combining $^{235}U$-fueled and $^{232}Th$-loaded cores in the Kyoto University Critical Assembly with the pulsed neutron generator (14 MeV neutrons) and the proton beam accelerator (100 MeV protons with a heavy metal target). The results of experimental subcriticality are presented with a wide range of subcriticality level between near critical and 10,000 pcm, as obtained by the pulsed neutron source method, the Feynman-${\alpha}$ method, and the neutron source multiplication method.

펄스발전기의 로터다이나믹 설계 (Rotordynamic design of Pulse Generator)

  • Kim, Yeong-Chun;Park, Cheol-Hyun;Park, Hei-Joo;Seon, Mun-Tae
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.379.2-379
    • /
    • 2002
  • The support bearing requires high DN to raise specific energy efficiency for the state of the art rotating machine with high speed. Especially for the system has a big rotor(750 kgf) with high speed(about one mi i lion DNs) such as the pulsed generator, tin selection of the bearing and lubrication method are very important. (omitted)

  • PDF

Blumlein 회로로 구성한 단방향 구형파 펄스 발생기 (Directonal Square Pulse Generator construct for Blumlein lain)

  • 김정달;장기혁;주성철;정장근;이덕진;이용길
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1779-1781
    • /
    • 1998
  • We are going to design the Square Pulse Generator use of PCPS (Photo-Conductive Power Switch) for Blumlein lain. The circeuit is made of LC device and it is simulated by Schematics Evaluation Version 8.0 of MicroSim. After charged by DC voltage 15[kV]. When the switch is ON, Square pulse is generated after pause time 1.7857[${\mu}s$]. The square pulse is maximum peak voltage 13.987[kV], pulsed width 3.4017[${\mu}s$], rising time 0.7474[${\mu}s$], falling time 1.1718[${\mu}s$].

  • PDF

펄스코로나 방전의 전극길이, 펄스반복율에 따른 부하 임피던스 변화 특성 및 EMTP 해석 (The EMTP Analysis and Characteristics of Load Impedance on Various Electrode length, Pulse Repetition in Pulse Corona Discharging)

  • 정종한;송우정;전진안;정현주;홍정환;김희제
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제51권4호
    • /
    • pp.158-163
    • /
    • 2002
  • The pulsed Power system has been widely used to many applications, such as E/P(Electrostatic Precipitator), DeNOx/DeSOx power system, often generator, etc. In this paper, we study EMTP analysis and characteristics of critical voltage and load in impedance on various electrode length of pulse corona. To obtain a stable pulse voltage, we designed a compact pulse generator switched MOSFET and tested their characteristics by adjusting electrode length and pulse repetition. As a re sult, critical voltage of pulse corona and load impedance on increasing electrode length were decreased. These results indicate we can control critical voltage of pulse corona and suppress arc discharging between two electrodes.

대 출력 발생장치의 지파불안정성 연구 (A Study of Slow Wave Instability on High Power Generator)

  • 김원섭;김종만
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.2109-2109
    • /
    • 2011
  • High power microwave sources operating in relativistic regions, high current reletivistic electron beams are obtained by using cold cathodes with the help of explosive emission. For these relativistic devices, the pulsed power and magnetic field systems are very large and heavy. The phase velocity of electromagnetic mode should be showed down close to the beam velocity, ensuring enough beam coupling with electromagnetic modes. By using the annular electron beam, a weakly relativistic oversized bwo consisting of rectangularly corrugated cylindrical waveguide is demonstrated.

  • PDF

고출력 펄스 반도체 레이저의 드라이버 모듈에 관한 연구 (A study on Driver module for a high-power pulsed laser diode)

  • 정인석;김호성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.1078-1080
    • /
    • 1999
  • A laser pulse generator which consists of charging resistor, energy storage capacitor laser diode, and switching elements was designed in order to generate 15ns, 20W laser pulses. And the effects of performances of SCR and FET as switching elements are compared. When SCR is used, the SCR's low maximum voltage makes the circuit so complicated, and when FET is used, the FET needs the special sate driver which improves the FET's operation.

  • PDF

대 전력 전자빔 발생 초기 전류에 대한 연구 (A Study of Starting Current High Power Electron Beam Production)

  • 김원섭
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2006년도 춘계학술대회 논문집
    • /
    • pp.268-271
    • /
    • 2006
  • We have studied the backward wave oscillator, a power-pulsed generator oscillator at 20 GHz has higher frequency then current one. An absolute instability linear analysis was used for the purpose of designing the slow wave structure. A large diameter of the slow wave structure was adopted to prevent the breakdown brought about by the increase of power density.

  • PDF

반도체에 대한 과도방사선 방호기술연구 (Study of a Protection Technology to the Transient Radiation for the Semiconductors)

  • 이남호;오승찬;정상훈;황영관;김종열
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 춘계학술대회
    • /
    • pp.1023-1026
    • /
    • 2013
  • 위 펄스형 방사선에 노출된 전자장비는 전자소자 내부에서 발생되는 전자-정공쌍(EHP)과 이들이 형성한 순간 광전류로 Upset, Latchup, Burn out 과 같은 다양한 피해를 입게 된다. 이와같은 손상은 군무기체계나 우주항공 장비의 경우 군전력 손실이나 장비의 기능정지로 나타나 국가적으로 큰 손실을 초래할 수 있다. 본 연구에서는 펄스형 감마방사선으로 부터 전자장비/소자를 보호하기 위한 방호기술개발의 일환으로 '방사선 감지 및 제어장치'를 구현하고 대표적으로 군장비에 사용되는 전자소자에 대한 기능검증을 시도하였다. 펄스 방사선에 Latchup 및 Burn out 손상특성을 나타내는 LM118 소자에 개발한 '방사선 감지 및 제어장치'를 적용하여 펄스방사선 조사시험을 수행한 결과 LM118이 안전하게 보호됨을 확인하였다.

  • PDF