• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.247-256
• /
• 1995

In this paper, double exposure holographic interferometry using ruby pulse laser is formed in order to investigate the propagation of transient waves. The vibration characteristics according to the change of impact load direction, i.e., impacted in the shear direction and in the normal direction are analyzed. It was observed that the macroscopic trends of transient wave generation and propagation in the assembly of precipitator plates were almost similar regardless of the change of impact load direction. But the propagation and mixing of transient wave was advanced relatively slowly when impacted in the normal direction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.529-532
• /
• 2002

We experimentally investigate the evolution of nanosecond Stokes pulses in a single-pass Raman laser pumped by a Q-switched Nd: YAG laser at 1064 nm. As a Raman medium, a GeO$_2$-doped graded-index multimode fiber of 220m long is used. We demonstrate that efficient generation of several Stokes components with 1.5-2.7 nanosecond pulsewidth is obtained by varying the input pump energy.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.230-237
• /
• 2013

This paper presents a novel nonlinear model of Switched Reluctance Generator (SRG) based on wind Energy Conversion system. Closed loop control with based Proportional Integrator current Chopping Control machine model is used. A Power converter in SRG can be controlled by using PI-CCC proposed model, and can be produced maximum power efficiency and minimize the ripple contents in the output of SRG. A second power converter namely PI based controlled PWM Inverter is used to interface the machine to the Grid. An effective control technique for the inverter, based on the pulse width modulation (PWM) scheme, has been developed to make the line voltage needs less power switching devices and each pair of turbine the generated active power starts increasing smoothly. This proposed control scheme feasibility and validity are simulated on SIMULINK/SIM POWER SYSTEMS only.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.535-543
• /
• 2009

In this paper, pulse-width modulation (PWM) control strategy of various topologies of matrix converters is presented, which is based on direct duty ratio PWM (DDPWM). Because the DDPWM method has the characteristics of the inherent per-phase modular structure, it can be effectively applied to single-phase, two-phase and three-phase four-leg matrix converters as well as the common three-phase to three-phase matrix converter. Also, this paper treats command generation method in each matrix converter. The feasibility and validity of the proposed method are verified by experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1990-1997
• /
• 1998

It is very essential to remove a strong ground clutter and moving clutter for an extraction of accurate information from a Doppler weather radar. Therefore, this paper proposed the use of an adaptive array antenna to overcome the shortages of a conventional weather radar. In the first, a simulation method was suggested for the generation of clutter and weather signals. Using these data, the performance of a weather radar was analyzed under various conditions. It is shown that the quality of pulse-pair estimates was greatly improved from the simulation results.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.364-368
• /
• 2012

We generate 10 GHz short pulses from a continuous wave laser at 1.5 um by cascaded intensity and phase modulation, followed by chirp compensation using a single mode fiber. The measured spectral and pulse widths are 0.64 nm and 5.7 ps respectively, resulting in the time-bandwidth product of 0.46.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.105-112
• /
• 2007

Tungsten wire micro electrochemical machining (W-wire micro ECM) with ultra-short pulses enables precise micro machining of metal. In wire micro ECM, platinum wire has been used because it is electrochemically stable. However, the micro metal wire with low strength is easily deformed by hydrogen bubbles which are generated during the machining. The wire deformation decreases the machining accuracy. To reduce the influence of hydrogen bubbles, in this paper, the use of tungsten wire was investigated. To improve machining accuracy, suitable pulse conditions which affect generation of bubbles were also investigated. The tungsten wire micro ECM can be applied to the fabrication of various shapes. Using this method, various micro-parts and shapes were fabricated.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.142-152
• /
• 2016

Common mode voltage (CMV) generation is a major problem in switching power converter fed induction motor drive systems. CMV is the zero sequence voltage generated due to the switching action of power converters. Even a small magnitude of CMV with a high rate of change may circulate large bearing currents which may damage a machine's bearings and shorten its life. There are several methods of controlling CMV. This paper presents 3-level sinusoidal pulse width modulation based techniques to control the magnitude and rate of change of CMV in multilevel AC-DC-AC drive systems. Simulation and experimental investigations have been presented to validate the performance of proposed technique to control CMV in 3-level neutral point clamped inverter based AC-DC-AC system.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1459-1460
• /
• 2006

A new gas jet Z-pinch EUV light source having double gas jet electrodes has been developed. It has two nozzles and two diffusers. The EUV beam is collected from the side of pinch plasma, generated in between the inner nozzle and corresponding diffuser. A cylindrical shell of He gas curtain produced by the outer nozzle is specially designed for shielding the debris and suppressing the inner gas expansion. We have succeeded in generating EUV energy of 1.22 mJ/sr/2%BW/pulse at 13.5nm. The estimated dimension of EUV source is to be FWHM diameter of 0.07 mm and length of 0.34 mm, and FW 1/e2 diameter of 0.15 mm and length of 1.2 mm.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1463-1464
• /
• 2006

이 논문에서는 코일의 구조가 변압기형태인 나선형 자속압축 발전기, 켄칭매질인 $SiO_2$ 분말과 동선으로 제작한 퓨즈개방스위치, 두 개의 전극으로 간단하게 만든 스파크 갭 스위치 그리고 수저항 모의부하로 이루어진 대전류 고전압 펄스발생 시스템을 제작하고 출력특성을 분석하였다. 실험결과, 축전기로부터 공급한 364J의 초기에너지를 나선형 자속압축발전기로 증폭을 하고 최대 출력전류에서 퓨즈개방스위치가 동작하여 $120{\Omega}$의 수저항에 펄스상승시간이 56ns이고, 펄스폭이 $0.1{\mu}s$인 180kV의 고전압펄스를 인가하였다.