• 한국표면공학회지
• /
• 제47권5호
• /
• pp.221-226
• /
• 2014

A low temperature plasma nitrocarburizng was implemented on the duplex stainless steel to achieve the enhancement of surface hardness without degradation of its corrosion resistance. Attempts were made to investigate the influence of Pulse frequency and Duty factor of pulsed power in a high Pulse frequency regime on the surface characteristics of the hardened layer. The hardened layer (S-phase) was formed on all of the treated surfaces. Surface hardness reached up to 1300 $HV_{0.1}$ which is about 4.6 times higher than that of the untreated material (280 $HV_{0.1}$). The thickness of the hardened layer tends to increase lightly with the higher Pulse frequency and the higher Duty factor. The corrosion resistance of nitrocarburized duplex stainless steel was almost similar to that of the untreated material. Both the Pulse frequency and the Duty factor do not have a significant influence on the corrosion property of plasma treated duplex stainless steel.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3326-3333
• /
• 2023

The results of the analysis of a mathematical modeling for the IBR-2M pulsed reactor dynamics for a transition from a power pulse repetition frequency of 5 Hz-10 Hz are presented. The change in the amplitude response of the reactor for variable pulse delayed neutron fraction was studied. We used a set of power feedback parameters determined experimentally in 2021 at an energy output of 1820 MW·day. At a pulse repetition frequency of 10 Hz, the amplitude of pulse energy oscillations significantly depends on the value of the delayed neutron fraction in pulse β_p. Depending on β_p both suppression and amplification of reactor power fluctuations in the frequency ranges of 0.05-0.20 and 1.25-5.00 Hz can be realized.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.8-15
• /
• 2013

Wide range frequency pulses occur in a car crash test. Until now, low frequency under 400Hz has been used to determine an airbag deployment criteria. Also, FIS (Front Impact Sensor) has been used to detect the crash pulse in early stage. Nowadays, technology to determine an airbag delpoyment criteria by using a high frequency crash pulse without FIS is being focused on. In this paper, the signal transmissibility of high frequency pulse for two different cars was studied. Also, signal transfer test of high frequency pulse was done by using a high speed ball impact. Signal runtime of the frontal impact is compared with that of the side impact. The signal transmissibility difference due to the car structure difference was discussed and structure change for improving the signal transmissibility was proposed.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1061-1067
• /
• 2005

The resonant frequency modulation of $YBa_2Cu_3O_{7-x}$ meander lines has been investigated as functions of optical pulse energy and temperature by using a network analyzer. The frequency-domain measurements are performed by controlling both the resonant frequency and the frequency width. The meander lines, configured in a microstrip geometry, are illuminated by optical pulses from an actively mode-locked Nd:YAG laser. The variation of the resonant frequency shows a quadratic dependence on the reduced optical pulse energy $P/P_c$, where $P_c$ is defined as the critical optical pulse energy at which resonance signal has disappeared. As for the dependence on temperature, the results are in good agreement with the previously reported data.

• 한국산업정보학회논문지
• /
• 제24권5호
• /
• pp.95-104
• /
• 2019

본 논문에서는 잔향 환경에 강인한 GSFM(Generalized sinusoidal frequency modulated) 펄스를 설계하는 기법을 제안하였다. GSFM 펄스는 SFM(Sinusoidal frequency modulated) 펄스의 일반화한 형태로써 거리와 도플러 분해능이 모두 우수한 압정형태의 모호성 함수를 가지는 장점이 있다. 하지만 일반화를 하는 과정에서 주기성이 사라지기 때문에, 빗살형태의 스펙트럼을 가지는 SFM 펄스에 비해 잔향환경에서 탐지 성능이 저하된다. 본 논문에서는 GSFM 펄스의 파라미터 ${\rho}$를 적절히 변화시켜 SFM 펄스의 잔향 제거 성능과 GSFM 펄스의 거리 분해능 성능 간에 트레이드오프(Trade-off)관계를 분석하고, 비교적 높은 성능을 동시에 만족할 수 있는 ${\rho}$ 값을 제안하였다. 제안한 GSFM 펄스의 성능을 검증하기 위해 잔향환경을 모의하여 시뮬레이션을 수행하였으며, 제안한 GSFM 펄스가 저속의 도플러 표적을 탐지하면서 우수한 거리 분해능을 가지는 것을 확인할 수 있었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.263-264
• /
• 1998

In this paper, we present the result of feature points recognition and classification of radial pulse by the shape of pulse wave. And we analyze radial pulse in frequency domain. The recognition algorithm use the method which runs in parallel with both the data of ECG and differential pulse simultaneously to recognize the feature points. Also fie specified 3-time elements of pulse wave as main parameters for diagnosis and measured them by execution of algorithm, then we classify the shape of radial pulse by existence and position of feature points. lastly we execute frequency analysis on the feature points and get the power spectrum of radial pulse.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.55-57
• /
• 2007

$CO_2$ laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400ums laser beam in rain focus sacred ground surroundings cellular, tissue without vitiation me by evaporation Poe of very small floor as is clean steam can. Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can. Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1617-1618
• /
• 2013

• 전자공학회논문지SC
• /
• 제38권1호
• /
• pp.53-60
• /
• 2001

전력전자의 많은 응용분야에서 고주파 공진형 인버터가 이용되며, 이들 공진형 인버터의 출력 전력을 제어하기 위하여는 PAM(Pulse Amplitude Modulation), PFM(Pulse Frequency Modulation) 혹은 PWM(Pulse Width Modulation) 기법들이 이용된다. 그리고 이들 공진형 인버터는 변화하는 부하 상태에서도 신뢰성 있게 동작하기 위하여 출력추파수를 제어하여야 한다. 본 논문에서는 공진형 인버터의 PWM 제어의 일환으로써 새로운 스위칭 방법을 제안하였다. 제안한 방법에 의하면, 변화하는 공진 주파수하에서도 최적의 공진 주파수와 출력 기본파 역률 1을 달성할 수 있다. 제안한 PWM 스위칭 방법의 상세한 알고리즘 및 출력특성을 기술하였다. 그리고 실험 결과를 통하여 제안한 방법의 타당성을 확인하였다.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1063-1067
• /
• 2001

The effect of the pulse parameters(pulse ratio and frequency) on the characteristics of the nitrided layer in the pulsed plasma nitrified SCM435 Steels was investigated. Material properties of the nitrided layer were analysed by employing optical microscope, scanning electron microscope(SEM), X-ray diffractometer(XRD) and micro-Vickers hardness tester. It was found that both the compound layer thickness and the surface hardness decreased with decreasing of pulse ratios. At high pulse ratio, the compound layer thickness and the surface hardness were rapidly decreased with decreasing frequency compared to lower pulse ratios.