• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.4
• /
• pp.47-56
• /
• 1995

In this paper the model of the MQE-IMD-based neural trigger circuit is improved, where MQW-IMD is a new semiconductor device proposed and experimentally demonstrated by the author for the hardware implementation of the neural networks. The electron energy of AlXGa1-XAsbarrier is calculated by Ensemble Monte Carlo simulation according to the variation of Al mole fraction x and the applied electric field, whtich had been roughly estimated in the previous paper because of the difficulty to get the data. And in the consideration of the tunneling of the confined electrons within the quantum well the accuracy of the impact ionization rate is enhaned. Finally, the dependance of the frequency of pulse-train on the number of quantum wells can be calculated by modelling the effect of the distance of the induced positive charge from the cathode on the electric field at the cathode.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.217-221
• /
• 2006

Multipactor-free S-band duplexer based on inter-digital cavity type filter is proposed and demonstrated by in-house mulitpactor test facility for satellite RF components. Multipactor sensitivity of designed duplexer is analyzed by checking it out the maximum field accumulated region inside duplexer and calculating the electric field intensities at each resonator using 3D EM simulation in order to restrict the minimum gap distance as 2.5 mm which handles 43.13 dBm RF input power. Multipactor threshold was finally detected at 44 dBm in experiment for pulse mode test. The developed multipactor test method is cost effective, simple structure and gives a good agreement compared with the previous high cost MP test methodologies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.25-26
• /
• 2009

We design and demonstrate the controlled morphologies of Ag-dpped ZnO nanowires (NWs) adopting self-contrived hot-walled pulsed laser deposition (HW-PLD). p-type Ag-doping is ensuired by low temperature photoluminescence (PL) spectrum to find the AoX peak at 3.349 eV. Morphology of grown NWs are controlled by changing the kinetic energy and flux of the ablated particles with adjusting the target - substrate (T-S) distance. The analysis on the resultant NWs is presented.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.3
• /
• pp.105-114
• /
• 2008

We present an eye tracking system using a low cost 3D CMOS imager for 3D displays that ensures a correct auto stereoscopic view of position- dependent stereoscopic 3D images. The tracker is capable of segmenting the foreground objects (viewer) from background objects using their relative distance from the camera. The tracker is a novel 3D CMOS Image Sensor based on Time of Flight (TOF) principle using innovating photon gating techniques. The basic feature incorporates real time depth imaging by capturing the shape of a light-pulse front as it is reflected from a three dimensional object. The basic architecture and main building blocks of a real time depth CMOS pixel are described. For this application, we use a stereoscopic type of display using parallax barrier elements that is described as well.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.50-57
• /
• 2008

A telemetry ground station has a highly directional, parabolic tracking antenna to receive a weak telemetry signal from a target at a distance. The tracking antenna with narrow beam-width normally uses the auto-track method for the target tracking. This paper presents several issues in the auto-track method and introduces a new tracking method using Self-Slaving technique. Self-Slaving means that the tracking antenna is slaved to not data measured by RADAR but GPS/INS informations received by the telemetry system for pointing. The Self-Slaving method shows good performance in comparison with auto-track method.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1035-1040
• /
• 2000

The Impingement of a weak shock wave discharged from the open end of a shock tube upon a flat plate was investigated using shock tube experiments and numerical simulations. Harten-Yee Total Variation Diminishing method was used to solve axisymmetric, unsteady, compressible flow governing equations. Computations predicted the experimented results with a good accuracy. The peak pressure on the flat plate was not strongly dependent of the shock wave Mach number in the present range of Mach Number from 1.05 to 1.20. The distance between the plate and shock tube was changed to investigate the effect on the peak pressure. From both the results of experiments and computations we obtained a good empirical equation to predict the peak pressure on the flat plate.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.242-247
• /
• 2009

The ability of time reversal techniques to focus ultrasonic beams on the source location is important in many aspects of ultrasonic nondestructive evaluation. In this paper, we investigate the time reversal beam focusing of ultrasonic array sensors on a defect in layered media. Numerical modeling is performed using the commercially available software which employs a time domain finite difference method. Two different time reversal approaches are considered - the through transmission and the pulse-echo. Linear array sensors composed of N elements of line sources are used for signal reception/excitation, time reversal, and reemission in time reversal processes associated with the scattering source of a side-drilled hole located in the second layer of two layer structure. The simulation results demonstrate the time reversal focusing even with multiple reflections from the interface of layered structure. We examine the focusing resolution that is related to the propagation distance, the size of array sensor and the wavelength.

• Journal of electromagnetic engineering and science
• /
• v.16 no.1
• /
• pp.1-6
• /
• 2016

Computer simulations were conducted to demonstrate the generation of microwave-induced thermoacoustic signal. The simulations began with modelling an object with a biological tissue characteristic and irradiating it with a microwave pulse. The time-varying heating function data at every particular point on the illuminated object were obtained from absorbed electric field data from the simulation result. The thermoacoustic signal received at a point transducer at a particular distance from the object was generated by applying heating function data to the thermoacoustic equation. These simulations can be used as a foundation for understanding how thermoacoustic signal is generated and can be applied as a basis for thermoacoustic imaging simulations and experiments in future research.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2030-2032
• /
• 1998

It is always necessary to high performance power supplies for the magnet system in the accelerator, especially when the number of power supplies are large. When have developed the compact power supply using switching technology instead of SCR phase control. We adopt the pulse width modulation(PWM) method with a half bridge DC/DC converter. In this way, we can make a compact system with light weight and small volume. Actual system we developed is 1.2kW, 35V/35A bipolar DC power supply current precision of +/-0.02%. It is possible to mount 10 unit in a conventional 19 rack. The built in controller has an RS422 protocol to drive 10 unit by one serial port up to 1.2km distance. If we adopt RS485 protocol, one serial port can control 32 power supplies. In this paper, we will report the design and performance of the prototype power supply.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.103-106
• /
• 2003

In this study, an ultrasonic transducer is fabricated with 1-3 type composite resonators. Pulse-echo responses of an ultrasonic transducer are investigated in underwater dependent on the variable designated water-level. LED Output signals of a level limit with changing a water level is obtained by the 1-3 type self-made composite transducer and electric measuring unit. LED is turned on at above the up-limit level with increasing a water level, and LED is turned on at less than the down-limit level with decreasing a water level. There was good agreement between the virtual water level and output LED signal by using the self-made water-detecting system.