• 제목/요약/키워드: pulse amplitude modulation

검색결과 139건 처리시간 0.027초

레일리 페이딩 환경에서 16QAM 시스템에서 심볼 타이밍 복원의 성능분석 (Performance Analysis of Symbol Timing Recovery for 16QAM System in Rayleigh Fading)

  • 문재경;김영수;김창주
    • 한국전자파학회논문지
    • /
    • 제7권3호
    • /
    • pp.201-210
    • /
    • 1996
  • 본 논문에서는 페이딩환경에서 16QAM Radio 시스템의 심볼 타이밍 복원에 대한 성능을 분석하였다. 심볼 타이밍 복원 방식으로서 파형 성형 필터 즉 raised cosine filter(RCF)와 비선형 필터를 사용하여 비영점교차방식인 MAM(Maximum Amplitude Method)과 WDM (Wave Difference Method)을 비교 분석하였다. 시뮬레이션에 의한 결과로부터 비선형 필터를 사용한 심볼 동기 방식(MAM and WDM)이 RCF를 사용한 것보다 지터 성능이 더 우수함을 알 수 있었다. 또한 레일리 페이딩채널을 추정하고 보상하기 위해 PSAM(Pilot Symbol Assisted Modulation)방식과 공간 다이버시티방석을 적용하였으며, $E_b/N_o$가 20dB일 때 $10^{-4}$의 BER(Bit Error Rate)성능을 얻을 수 있었다.

  • PDF

Characteristics of Al Doped ZnO Thin Film by Modulated Pulsed Power Magnetron Sputtering

  • 양원균;주정훈
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.430-430
    • /
    • 2012
  • Modulated pulsed power (MPP) 스퍼터링은 펄스 전압 shape, amplitude, duration의 modulation을 통해 증착율 손실을 극복하는 고출력 펄스 마그네트론 스퍼터링의 한 종류이다. Micro second 범위에서 on/off 시간을 다중 세트 형태로 자유롭게 프로그램 할 수 있어서 아킹 없이 고전류 영역의 마그네트론 동작을 할 수 있으므로, 고주파 유도 결합 플라즈마원이나 마이크로웨이브 투입 등의 부가적인 플라즈마 없이도 스퍼터링 재료의 이온화 정도를 획기적으로 높일 수 있는 장점을 가지고 있다. 본 연구에서는 $2{\times}1{\times}0.2$의 sputtering system에서 기판 캐리어를 이용해서 $400{\times}400mm$ 기판을 $272{\times}500mm$ 크기의 AZO target (Al 2 wt%)이 설치되어 있는 moving magnet cathode (MMC)을 이용하여 MPP로 증착했다. 두 종류의 micro pulse set을 하나의 macro pulse에 사용함으로서 weakly ionized plasma와 strongly ionized plasma를 만들 수 있다. 다양한 micro pulse set을 이용하여 평균 전력 2 kW에서 peak 전력을 4 kW에서 45 kW까지 상승 시킬 수 있으며, 이 때 타겟-기판 거리 80 mm에서 이온전류밀도는 $5mA/cm^2$에서 $20mA/cm^2$까지 상승했다. MPP는 같은 평균 전력에서 repetition frequency가 증가할 때, 증착 속도가 증가했으며, 같은 repetition frequency에서 macro pulse length가 증가할 때도, 증착 속도가 증가했다. 최적화된 marco, micro pulse set에서 증착 속도는 평균 전력 2 kW에서 110 nm/min이었고, 700 nm의 박막에서 비저항은 $1-2{\times}10^{-3}ohm{\cdot}cm$였다. 표면거칠기 Rrms는 약 3 nm였고, 400-700 nm 영역의 평균 투과도는 72-76%였다.

  • PDF

초음파 진동절삭기의 펄스폭변조 가진 특성 (Characteristics of Pulse Width Modulation(PWM) Excitation of Ultrasonic Elliptical Vibration Cutting Device)

  • 노병국;김기대
    • 한국기계가공학회지
    • /
    • 제13권1호
    • /
    • pp.59-65
    • /
    • 2014
  • To obtain an elliptical trajectory at the cutting edge during elliptical vibration cutting, sinusoidal voltage excitations of two piezoelectric actuators have commonly been used. In this study, PWM excitation, which is relatively simple to generate, was employed and its characteristics were investigated. In experimental and analytical analyses, we found that for PWM excitation, the integer-multiple frequencies of the excitation voltage distorted the shape of the elliptical trajectory, whereas at a duty ratio(DR) of 50%, the distortion of the elliptical trajectory was minimized due to disappearance of the first overtone. When the magnitude of the maximum excitation voltage was maintained at the same level for both PWM and sinusoidal excitation, PWM (DR=50%) excitation produced a greater vibration amplitude than sinusoidal excitation but resulted in more rapid saturation of a high-frequency power amplifier.

다중 사용자 환경에서 TH-PAM UWB 시스템의 데이터 및 이미지 전송 성능 분석에 관한 연구 (A Study on Analysis and Applications of Multi-user TH-PAM UWB System)

  • 배진화;성태경;김철성;김동식;원영수;조형래
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
    • /
    • pp.69-73
    • /
    • 2008
  • 본 논문에서는 다중 사용자 시간 도약 펄스 위치 변조(TH-PAM) 초광대역 시스템(UWB System)의 동작을 분석한다. 이상적인 AWGN 채널 환경과 상관 수신기로 TH-PAM과 TH-PPM의 동작을 분석하였다. 두 UWB 시스템의 BER 특성을 나타내는 표준 규칙을 얻기 위하여 전력 스펙트럼 밀도 함수(PSD)를 사용하였으며 시스템 매개 변수들에 실행을 관련시키는 함수를 얻을 수 있었다. 시스템의 Data와 image 전송의 시뮬레이션 결과로 이론적인 분석을 한다.

  • PDF

4-PAM signaling을 이용한 high speed serial link transmitter (High Speed Serial Link Transmitter Using 4-PAM Signaling)

  • 정지경;이정준;범진욱;정영한
    • 대한전자공학회논문지SD
    • /
    • 제46권11호
    • /
    • pp.84-91
    • /
    • 2009
  • 본 논문은 multi-level signaling을 이용한 high speed serial link transmitter에 관하여 제안하였다. High speed serial link에서 수 Gb/s를 달성하기 위해 4-pulse amplitude modulation (PAM) 을 사용하였다. 4-PAM은 4개의 level로 한 symbol time에 2 bit data를 전송함으로써 binary signaling보다 2배 빠른 data 전송이 가능해졌다. 제안된 4-PAM transmitter는 전압 output 대신 전류 output을 생성하며 이로 인해 driver의 switching time이 빨라져서 더 높은 속도의 transmitter를 구현할 수 있었다. $2^5-1$ pseudo-random bit sequence (PRBS) 생성기는 built-in self test (BIST)를 하기 위해 on-chip으로 설계되었다. 본 연구는 동부 하이텍 $0.18{\mu}m$ CMOS 공정을 통하여 설계되었으며 1.8 V supply voltage에서 eye 크기가 160 mV 이고 최대 동작 속도는 8 Gb/s이다. 칩 전체 면적은 $0.7\times0.6mm^2$이며 전력 소모는 98 mW이다.

주파수 공간 블록 부호화된 단일 측대 파형 SC FDMA 전송 시스템 (Space-Frequency Block Coded Single Side Band SC-FDMA Transmission System)

  • 원희철
    • 한국산학기술학회논문지
    • /
    • 제20권7호
    • /
    • pp.423-429
    • /
    • 2019
  • 최근에 초고속 광대역 무선통신 전송 시스템의 수신 성능 개선을 위한 다양한 기술들이 제안되고 있다. 본 논문에서는 주파수 공간 블록 부호화된 단일 측대 파형 SC (Single Carrier) FDMA (Frequency Division Multiple Access) 전송 시스템을 제안한다. 본 논문에서 제안된 주파수 공간 블록 부호화된 단일 측대 파형 SC FDMA 전송 시스템에서는 PAM (Pulse Amplitude Modulation) 신호의 DFT (Discrete Fourier Transform) 확산에 따라 생성되는 켤레 복소수 대칭을 활용하여 주파수 공간 블록 부호를 구현한다. 이를 통해 시스템 계산 복잡도를 크게 증가시키지 않으면서 단일 측대 파형 SC FDMA 전송 시스템의 성능 개선을 위한 송신 다이버시티 이득을 획득할 수 있다. 본 논문에서 제안된 주파수 공간 블록 부호화 단일 측대 파형 SC FDMA 시스템의 신호 대 잡음 비 성능이 단일 안테나 기반의 단일 측대 파형 SC FDMA 시스템보다 $10^{-2}$ 심볼 오류율 수준에서 약 4 dB 이상 개선되는 것을 실험을 통해 확인할 수 있다.

Modulation, Harmonic Analysis, and Balancing Control for a New Modular Multilevel Converter

  • Li, Binbin;Zhang, Yi;Wang, Gaolin;Xu, Dianguo
    • Journal of Power Electronics
    • /
    • 제16권1호
    • /
    • pp.163-172
    • /
    • 2016
  • The modular multilevel converter (MMC) has been receiving increased attentions in recent years. The new modular multilevel converter is a derivative topology from the traditional MMC in which the number of sub-modules (SMs) necessitated by each phase can be reduced by one. This paper presents a phase-shifted carrier pulse-width modulation (PSC-PWM) for the new MMC with an optimal phase-shifted angle to suppress the harmonics of the output voltage. Further, the harmonic features when the capacitor voltage of the middle SM is selected as two different values are also investigated. Moreover, in order to avoid introducing an unnecessary dc offset current at the ac terminals of the new MMC, a novel capacitor voltage balancing scheme is proposed by adjusting the amplitude of the reference signals rather than the offset. Finally, the validity and effectiveness of the proposed modulation and balancing schemes have been verified by experimental results based on a three-phase prototype of the new MMC.

Half-Cycle-Waveform-Inversed Single-Carrier Seven-level Sinusoidal Modulation

  • Wu, Fengjiang;Sun, Bo;Zhang, Lujie;Sun, Li
    • Journal of Power Electronics
    • /
    • 제13권1호
    • /
    • pp.86-93
    • /
    • 2013
  • A half-cycle-waveform inversion based three reference modulations seven-level SPWM (TRM-SPWM) scheme with one carrier is proposed in this paper. To keep the same comparison logics for the modulations and carrier during the negative half cycle and the positive one for the modulations, in the negative half cycle of the modulations, the DC offsets related to the amplitude of the carrier are set on the three modulations, respectively. The seven-level SPWM waveform with dead time thereby is implemented with only one Digital Signal Processor (DSP) without any other attached logic circuit. The basis principle of the proposed TRM-SPWM is analyzed in detail, and the frequency spectrums of the conventional and the proposed schemes are derived and compared with each other through simulation. The DSP based implementation is presented and detailed experimental waveforms verify the accuracy and feasibility of the proposed TRM-SPWM scheme.

Optimum thickness of GaAs top layer in AlGaAs-based 850 nm VCSELs for 56 Gb/s PAM-4 applications

  • Yu, Shin-Wook;Kim, Sang-Bae
    • ETRI Journal
    • /
    • 제43권5호
    • /
    • pp.923-931
    • /
    • 2021
  • We studied the influence of GaAs top-layer thickness on the small-signal modulation response and 56 Gb/s four-level pulse-amplitude modulation eye quality of 850 nm vertical-cavity surface-emitting lasers (VCSELs). We considered the proportionality of the gain-saturation coefficient to the photon lifetime. The simulation results that employed the transfer-matrix method and laser rate equations led to the conclusion that the proportionality should be considered for proper explanation of the experimental results. From the obtained optical eyes, we could determine an optimum thickness of the GaAs top layer that rendered the best eye quality of VCSEL. We also compared two results: one result with a fixed gain-saturation coefficient and the other that considered the proportionality. The former result with the constant gain-saturation coefficient demonstrated a better eye quality and a wider optimum range of the GaAs top-layer thickness because the resultant higher damping reduced the relaxation oscillation.

Unipodal 2PAM NOMA without SIC: toward Super Ultra-Low Latency 6G

  • Chung, Kyuhyuk
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제13권1호
    • /
    • pp.69-81
    • /
    • 2021
  • While the fifth generation (5G) and beyond 5G (B5G) mobile communication networks are being rolled over the globe, several world-wide companies have already started to prepare the sixth generation (6G). Such 6G mobile networks targets ultra-reliable low-latency communication (URLLC). In this paper, we challenge to reduce the inherent latency of existing non-orthogonal multiple access (NOMA) in 5G networks of massive connectivity. First, we propose the novel unipodal binary pulse amplitude modulation (2PAM) NOMA, especially without SIC, which greatly reduce the latency in existing NOMA. Then, the achievable data rates for the unipodal 2PAM NOMA are derived. It is shown that for unequal gain channels, the sum rate of the unipodal 2PAM NOMA is comparable to that of the standard 2PAM NOMA, whereas for equal gain channels, the sum rate of the unipodal 2PAM NOMA is superior to that of the standard 2PAM NOMA. In result, the unipodal 2PAM could be a promising modulation scheme for NOMA systems toward 6G.