• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.147-155
• /
• 2016

본 연구는 사탕수수 부산물 펄프를 Element Chlorine Free (ECF) 표백 처리할 때 마지막 과산화수소 표백단계를 추가하여 최종 표백 펄프의 잔류 이산화염소를 제거하고, 총 이산화염소 사용량을 제거하고자 하였다. 특히 과산화수소 표백단계를 효과적으로 사용하기 위한 킬레이트 처리 단계를 반응 조건이 비슷한 이산화염소 표백 단계와 동시 진행하였을 때, 개별적으로 킬레이트 처리를 진행한 표백 펄프의 표백 특성을 비교하였다. 총 이산화염소 사용량이 4.5%(w/w oven dried pulp)일 때 EDTA의 경우 킬레이트를 동시 처리할 때 백색도와 점도는 각각 87.0% ISO와 25.8 cPs로 개별 처리하는 경우 보다 더 높은 표백 특성(86.4% ISO, 25.2 cPs)을 나타냈다. 반면 DTPA를 킬레이트 화합물로 사용하는 경우 동시처리 시(83.9% ISO, 21.9 cPs) 개별처리(86.8% ISO, 25.6 cPs) 보다 표백 특성이 낮은 수준을 나타냈다. 특히 EDTA를 킬레이트 화합물로 사용시 잔류 전이금속(망간 이온, 철 이온) 농도가 개별처리 시 0.65 ppm, 66.74 ppm으로 나타난 반면 동시 처리시 0.52 ppm과 55.68 ppm으로 킬레이트 처리 효과가 향상됨을 확인할 수 있다. DTPA는 동시 처리시 0.71 ppm과 116.88 ppm의 망간 이온, 철 이온 농도가 나타난 반면 개별 처리시 0.56 ppm, 86.17 ppm의 농도로 동시 처리 시 킬레이트 처리 능력이 감소됨을 알 수 있다. 이를 통해 킬레이트 화합물 종류와 처리 방법에 따라 킬레이트 효과의 차이가 나타나며, 효율적인 공정을 위해서는 EDTA를 킬레이트 화합물로 이산화염소 표백단계와 동시 처리하는 것이 표백 효율과 공정효율을 위해 유리한 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제12권2호
• /
• pp.27-34
• /
• 1984

In order to investigate the acidic chlorinated compounds in pulp bleaching spent liquor, the lignin model compounds, coniferyl alcohol(mp $74^{\circ}C$), ${\omega}$-(2-methoxyphenoxy)-acetoguaiacone(mp $93^{\circ}C$) and dehydrodiisoeugenol(mp $133^{\circ}C$), were synthesized and chlorinated by chlorine in glacial acetic acid. From the chlorinated products, the following chlorine-containing aromatic compounds were identified by TLC. In coniferyl alcohol the chlorine-substituted compounds at 4-, 5-and 4,5-position of aromatic nucleus were identified and in ${\beta}$-0-4 type the compounds substituted chlorine for alkyl group and/or hydrogen at land 1,4-position of aromatic nucleus expected to be formed by electrophilic displacement from ${\omega}$-(2-methoxyphenoxy)-acetoguaiacone were not identified but the chlorine-substituted compounds at 4-, 5-, 6- and 5,6-position of aromatic nucleus were identified.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.57-65
• /
• 2015

Microfibrillated cellulose (MFC) or Nanofibrillated cellulose (NFC) has been used to reduce the use of raw pulp and to improve paper strength. The problem of MFC preparation is high manufacturing cost. In this study, it was carried out to prepare MFC after enzyme beating and estimated properties of MFC. Endo-D was the best beating efficiency among three type of endo-glucanase. As the grinder pass number increased, the viscosity and the fines of MFC suspension increased while the crystallinity and the porosity of MFC sheet decreased. Also enzyme beating MFC was higher value in the crystallinity and lower value in the viscosity than non-enzyme MFC. In addition, the aspect ratio of MFC was the highest at 5 pass. MFC addition improved the handsheet strength and the air permeability but worsened the drainage.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.1-11
• /
• 2007

To evaluate the quality of waste paper used for the manufacture of linerboard, the types of papers and foreign materials in compressed waste paper currently used were investigated. The recycled fibers were obtained from printing paper, newspaper, wrapping paper, white coated paperboard and corrugated container. Their fibers were observed by using a microscope, and the mechanical properties of the recycled papers manufactured from the recycled fibers were investigated. The compressed wastepaper was composed of 54% paperboard, 20% printing paper, and 20% newsprint. The content of foreign materials was about 4%, showing higher contents compared to 1% of foreign substances provided by Korea paper manufacturers' association. The types of foreign materials were various, which include vinyls, plastics, metals, woods, styrofoams, and cloths. Sound fibers were generally observed in the recycled fibers of printing papers and wrapping paper. The recycled fibers of white coated board, corrugated container and newsprint showed to be generally damaged. The whiteness of each recycled fiber were highly affected by pulp bleaching and ink-particle mixing conditions. The values of breaking length and burst index were lower than those for corrugating medium and liner board specified in KS. Although the anatomical characteristics of recycled fibers varied, their strengths appeared to be similar. This result may be explained by the use of non-deinked fiber.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.617-632
• /
• 2019

This study aimed to investigate the anatomical structure and fiber quality of four lesser-used wood species namely Benuang (O. sumatrana), Duabanga (D. moluccana), Pisang Merah (H. hellwigii), and Terap (A. odoratissimus). This study evaluated its suitability for raw material in pulp and paper manufacturing. The anatomical structure was observed macro- and microscopically. Macroscopic structures were observed directly to the wood samples, while microscopic characteristics were observed through microtome specimens. Fiber dimension was measured through macerated specimens and fiber quality was analyzed following the Rachman and Siagian's method. Results showed that these four timber species have similarity in the indistinct growth ring, diffuse porous in a radial pattern, rounded solitary vessel outline, 1 to 3 cells of ray width, deposits within the rays, fiber length, and cell wall thickness. Differences were found on vessel diameter, vessel grouping, vessel frequency, tyloses existence, type of axial parenchyma, and ray height. Based on fiber length and its derived values, the wood fibers of all species studied are suitable for pulp and paper manufacturing. They belong to the II quality class. The produced pulp and paper would have good quality, especially in tensile, folding, and tear strength. To promote their utilization, silviculture aspect of these four species has to be well understood.

• International Journal of Oral Biology
• /
• 제47권4호
• /
• pp.55-62
• /
• 2022

Bioactive flavonoids have been shown to improve the biological activity of stem cells derived from different sources in tissue regeneration. The goal of this study was to see how naringin, a natural flavonoid discovered in citrus fruits, affected the biological properties of human dental pulp stem cells (HDPSCs). In this study, we found that naringin increases the migratory ability of HDPSCs. Naringin increased matrix metalloproteinase-2 (MMP-2) and C-X-C chemokine receptor type 4 (CXCR4) mRNA and protein expression in HDPSCs. ARP100, a selective MMP-2 inhibitor, and AMD3100, a CXCR4 antagonist, both inhibited the naringin-induced migration of HDPSCs. Furthermore, naringin increased osteogenic differentiation of HDPSCs and the expression of the osteogenic-related marker, alkaline phosphatase in HDPSCs. Taken together, our findings suggest that naringin may be beneficial on dental tissue or bone regeneration by increasing the biological activities of HDPSCs.

• 폴리머
• /
• 제38권5호
• /
• pp.566-572
• /
• 2014

이축압출기(twin screw extruder)를 이용하여 폴리프로필렌(polypropylene, PP)의 종류에 따라 말레인산 무수물(maleic anhydride, MAH) 함량과 스티렌(SM)/MAH 몰비를 변화시키며 MAH가 그래프트된 PP(MAH-g-PP)를 제조하였다. PP의 종류로는 이소탁틱(isotactic, iPP), 블록(block, bPP), 랜덤(random, rPP)에 대해 용융지수(melt index, MI)가 10 그리고 25 g/10 min이 사용되었고, 개시제로는 dicumyl peroxide(DCP)가 사용되었다. MAH의 그래프트 정도는 FTIR을 이용하여 $1700cm^{-1}$ 근처에서 나타나는 카르보닐기(C=O) 신축진동 피이크의 존재 여부를 통해 확인하였다. 또한 PP/MAH-g-PP/pulp 복합체의 열적특성을 시차주사열용량분석기(DSC)와 열중량분석기(TGA)를 이용하여 관찰하였다. 복합체의 열적특성에는 큰 차이를 나타내지 않았다. 복합체의 인장특성과 인장시험 후 파단면의 SEM을 측정한 결과, MAH-g-rPP를 상용화제로 적용한 경우 인장특성 개선효과가 가장 우수하였다. MAH 함량 1.0 wt%, SM/MAH 몰비 1.0, MI = 25 g/10 m인 경우가 최적으로 평가되었다. 복합체의 유변학적 특성은 동적유변측정기를 이용하여 측정하였고, 복소 점도와 전단박하 그리고 함수량의 경우 펄프의 함량에 따라 증가하였다.

• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.57-62
• /
• 2017

하이드로퀴논 환원제를 사용하는 무전해 은도금 방법으로 은(Ag)코팅 구리(Cu) 플레이크를 제조하는 공정에서 전처리 용액, 반응온도, pH, Ag 도금액 조성 및 주입속도, 펄프농도 등 여러 변수를 변화시켜가며 우수한 품질의 Ag 코팅이 형성되는 공정조건들을 확보하였다. Cu 플레이크 표면의 산화층을 제거하기 위한 효과적인 전처리 용액이 제시되었고, 낮은 반응온도, 4.34 수준의 pH값, 느린 Ag 도금액 주입속도, Ag 도금액에서 증류수 제거, 높은 펄프농도 조건에서 분리형 미세 Ag 입자들의 생성이 억제되고, Cu 표면 커버리지가 우수한 Ag 코팅층이 형성됨을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.543-551
• /
• 2002

Nitric oxide (NO) is a small molecule (mol. wt. 30 Da) and oxidative free radical. It is uncharged and can therefore diffuse freely within and between cells across membrane. Such characteristics make it a biologically important messenger in physiologic processes such as neurotransmission and the control of vascular tone. NO is also highly toxic and is known to acts as a mediator of cytotoxicity during host defense. NO is synthesized by nitric oxide synthase (NOS) through L-arginine/nitric oxide pathway which is a dioxygenation process. NO synthesis involves several participants, three co-substrates, five electrons, five co-factors and two prosthetic groups. Under normal condition, low levels of NO are synthesized by type I and III NOS for a short period of time and mediates many physiologic processes. Under condition of oxidant stress, high levels of NO are synthesized by type II NOS and inhibits a variety of metabolic processes and can also cause direct damage to DNA. Such interaction result in cytostasis, energy depletion and ultimately cell death. NO has the potential to interact with a variety of intercellular targets producing diverse array of metabolic effects. It is known that NO is involved in hemodynamic regulation, neurogenic inflammation, re-innervation, management of dentin hypersensitivity on teeth. Under basal condition of pulpal blood flow, NO provides constant vasodilator tone acting against sympathetic vasoconstriction. Substance P, a well known vasodilator, was reported to be mediated partly by NO, while calcitonin-gene related peptide has provided no evidence of its relation with NO. This review describes the roles of NO in dental pulp in addition to the known general roles of it.

• 펄프종이기술
• /
• 제36권5호
• /
• pp.1-10
• /
• 2004

The geometry of headboxes is of great importance in obtaining good formation, even basis weight profile and fiber orientation. Therefore, many attentions have been made to examine the influence of the geometry of headboxes on the flow behavior. In this study, to evaluate flow behavior in headboxes, three types of turbulence generators were examined using pilot headbox. Velocity profiles in MD and CD were measured using a pressure monitoring system and flow in headboxes was visualized by dye injection method. CD velocity profiles at three different locations inside the slice of Type A headbox showed that the velocity increased downstream to slice exit and had a pattern with four humps due to the persisting wall effect of step diffusors. Results from the evaluation of normalized velocity profile and flow visualization showed that L-shaped Type C headbox caused a large pressure drop but it lacked in flow stabilizing ability.