• 펄프종이기술
• /
• 제37권1호
• /
• pp.53-60
• /
• 2005

The mechanical properties of deinked mixed office waste paper in relation to sorts and dosage of enzymes were investigated for successful enzymatic deinking of mixed office waste paper. The increasing of $\Delta$. freeness was most predominant in pulp of Denimax treated pulp. The tensile and burst properties are decreased with enzyme dosage while $\Delta$. freeness were increased. The fine content in disintegrated pulp was decreased with enzyme dosage of $0.4\%$ on the dried weight of paper. The water absorption of handsheets of enzyme deinked pulp was like as that of market roll tissue papers and the mechanical properties of handsheets of enzyme deinked pulp were improved with enzyme treatment comparing of market roll tissue papers.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.9-14
• /
• 2008

Beating and using chemical agents are common methods to improve physical properties. But the beating is high energy consumption process and chemical agent addition may cause deteriorate waste water quality. Therefore, it is necessary to use more environment-friendly methods. In this study, micro pulp was used in the handsheet making to get improving effects of physical properties without beating treatment and chemicals. Stiffness, thickness and air permeability were increased and strength properties of paper were also improved to some extents by only the micro pulp addition.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.75-83
• /
• 2015

The applicability of oil palm biomass, EFB(Empty Fruit Bunch) as raw materials for environmental friendly packaging material, pulp mold, was evaluated in this study. The changes in the water absorption properties of pulp mold by the addition of EFB and the surface treatments with PVA and AKD were analyzed by measuring the changes in the water absorption rate and the water contact angle. The each pulp mold sample was prepared by using laboratory wet pulp molder. And the water absorption rate of each samples were evaluated by measuring times for the absorption of a 0.1 ml water drop on the pulp mold sample surface. The addition of EFB to the pulp mold made of OCC resulted in the decrease of water absorption rate and the increase in the water contact angle. The surface treatments with PVA and AKD on the OCC pulp mold showed the significant reduction in the water absorption rate. However, in case of ONP pulp mold, the addition of EFB and the surface treatments with PVA and AKD showed no big changes in water absorption times. Those might be come from the finer surface structure of ONP pulp mold which were made of more finer and flexible fibers and more hydrophilic fibers. The results of this study showed the functional properties such as water absorption rate, could be controlled by the application of EFB and the treatments with AKD or PVA, especially in case of the OCC pulp mold.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.81-87
• /
• 2014

Conditions of paper manufacturing process should be changed depending on the end use and paper properties. Most of the case, mixed pulps with long softwood fibers and short hardwood fibers are used to achieve proper qualities of product with reasonable production cost. For specialty paper manufacture the wood pulp and cotton linter pulp are usually mixed together. The objectives of this study is to analyze physical, mechanical and fracture mechanical properties of paper depending on SwBKP, HwBKP and cotton linter pulp(CLP) mixing. When the mixing ratio of SwBKP was increased, strength properties, such as tensile, tear, and folding endurance, were also increased. When the mixing ratio of SwBKP and HwBKP was increased, stress concentration index was decreased and fracture toughness was increased.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.15-22
• /
• 2008

Properties of pulp fibers can be modified by LbL multilayering technology. We evaluated the effect of stock composition on the polyelectrolyte multilayering performance of pulp fibers in this study. Stock composition was varied with pulp type and fines content. Three types of pulp-Hw-BKP, BCTMP and KOCC-were treated with polyelectrolytes of poly-DADMAC and PSS. Fines content of stock were controlled at 0, 10, 20, 30, and 40%. Zeta potential of pulp fibers and charge demand of filtrate were evaluated. The highest adsorption ratio was obtained for BCTMP because of its shortest fiber length and highest specific surface area. Higher fines content in the stock increased the adsorption ratio of polyelectrolyte onto pulp fiber and it required a higher amount of polyelectrolyte for charge neutralization. For the pulp stock with higher fines content, a higher level of polyelectrolyte and the increased layer number were required to modify and stabilize the electrochemical properties of pulp fibers.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.10-16
• /
• 2006

The study was carried out to investigate how the refining of pulps affects the stress-strain characteristics and physical properties of paper. SwBKP and HwBKP were refined with Hollender laboratory beater to obtain three levels of freeness(500, 400 and 300 ml CSF) at the different consistencies(0.5% and 1.0%). The effects of fines were also evaluated. The stresses and strains of papers made from SwBKP and HwBKP were increased with refining. The absolute value of strain in paper made from SwBKP was higher than those of paper made from HwBKP. We also found that the presence of fines increased the stress and strain significantly in both pulp types. The refining at lower pulp consistency gave higher stress and strain properties. Most physical properties of paper were improved with refining, but the effect of refining consistency depended on the characteristics of each physical properties.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.45-52
• /
• 2007

Whole, bast and core fibers of kenaf cultivar Tainung-2 were pulped under different pulping methods, thermomechanical and kraft pulping methods. The physical and optical properties of kenaf TMP(thermomechanical pulp) and KP(kraft pulp) handsheets were investigated and the results from the study are summarized as follows: Yields of TMP and KP were $77{\sim}87%\;and\;43{\sim}52%$, respectively. There was no significant change in apparent density between kenaf KP and USKP(unbleached softwood kraft pulp) but TMP showed a little lower apparent density. Bast pulp had the lowest apparent density regardless of pulping methods. Tensile strength of kenaf KP was higher than that of TMP but similar to that of USKP. Both TMP and KP handsheets of bast fraction showed the highest tear strengths among whole, bast, and core fractions. Core fraction showed the lowest tear strengths under different pulping methods. In general burst strength of kenaf pulp under different pulping methods was lower than that of USKP, and kenaf pulp had better stiffness than USKP. Brightness of kenaf KP and TMP was higher than that of USKP. There was no significant variation in opacity between kenaf pulp and USKP even though kenaf pulp showed a little lower opacity. The main difference in paper quality between the core fiber and bast fiber is derived from the fact that bast fiber is long and thin, whereas core fiber is short and thick.

• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.581-590
• /
• 2020

Pulp refining is the major way to alter the properties of fibers and formed paper. Different combinations of the bar profile of the rotor and stator during low consistency refining processes directly affect the properties of the paper. In this study, a mixture of softwood and hardwood pulp was refined by varying the bar angle of the stator while that of the rotor is fixed at 0º. The pulp samples were collected at different refining times. Then, the pulp and paper properties, such as beating degree, fiber external fibrillation, and tensile and tear indexes were measured to explore the effects of the combined refining plates at different bar angles on paper properties. The results of the experiment show that the combined refining plate of 0º and 5º recorded the most significant improvement in the pulp beating degree and fiber external fibrillation. This consequently increased the fiber bonding area, which in turn, improved both the tensile and the tear indexes of the paper. Also, the influence of the combined refining plates with a larger bar angle on the paper properties was weaker compared to that of smaller angles. This study not only provides ideas for the bar profile design but also improves the optimal selection of refining plates.

• 한국식품조리과학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2016

This study aimed to enhance the applications of dates as a food material that can be utilized and stored easily by improving the inefficient process of the traditional cooking procedure. To this end, this study investigated the physico-chemical and nutritional properties of jujube pulp powder, and compared the traditional and newly developed methods of making yakbap, yakpyon, and jujube porridge. According to the analysis of physical and chemical properties, the jujube pulp powder contained 5.4% moisture, 2.6% crude ash, 6.6% crude protein, 0.35% crude fat, and 4.7% crude fiber. The water activity was 0.95% in jujube pulp while it was 0.24% in jujube pulp powder. In addition, the jujube pulp powder had a total sugar content of 70.4% and reducing sugar content of 6.3%. The vitamin C was content was estimated to be 68.5 mg/100 g in the jujube pulp powder and the jujube pulp contained 6.2 g/100 g of dietary fiber. Major minerals were K, Mg, and Ca. After appointing jujube pulp powder (new method) to a test group and jujube pulp (traditional method) to a control group, the sensory evaluation and acceptance testing were conducted for yakbap, yakpyon, and jujube porridge. As a result, there was no significant difference in any sensory factors tested (p<0.05). It was found that making and storing jujube pulp powder by drying jujube pulp is a useful way of utilizing jujube because Yakbab, Yakpyun and jujube porridge were found to have a relatively good appearance, color, flavor, taste, texture and overall acceptance.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.395-400
• /
• 2006

Polylactic acids polymer (PLA) was applied as an additive to improve the strength properties of handsheets prepared from three unbleached southern pine kraft pulps with different kappa number and an aspen bleached chemithermomechanical pulp (BCTMP). The results showed that PLA could greatly improve the tensile and burst strength of the pulp handsheets. Heat pressing effect was also important to enhance the strength properties. For unbleached kraft pulps, it was found that an appropriate amount of residual lignin in pulps had a positive effect on the handsheets strength improvement when adding PLA. The thickness of the handsheet did not change the PLA strengthening effect. In general, PLA effect on tear strength improvement could be neglected. However, it had a significant effect on the improvement of tear strength for the aspen BCTMP handsheets not containing sufficient amount of fines.