• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.139-147
• /
• 2003

Coater runnability of the paper coating and final product properties can be affected by the immobilization of coating color and the dewatering into the base paper. During the dewatering, the rheological properties and solids content of a coating are dramatically changed. For the purpose of obtaining better coater runnability and high quality of coater paper many papermakers are trying to improve the water retention of paper coatings by using some additives such as thickener and co-binder. In this study, we tried to investigate the rheological properties and the immobilization point of coatings with immobilization cell during the dewatering of coatings.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.30-36
• /
• 2002

The objective of this study was to investigate the viscosity of coating colors and ink-jet printing properties with different coating colors with various blending ratios of silica based pigments. The volume of pigments was measured to evaluate the effect of the pigments on the viscosity of coating colors. Contact angle, the change of ink diameter, optical density, and the area and perimeter of a printed let-ter were evaluated to examine the effect of the ink absorption on the ink-jet printing properties. Generally, as the amount of silica pigments Increased the ink-jet printing quality improved. But this caused an increase of the overall coating viscosity.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.54-59
• /
• 1999

This study was to quantify fiber distributions in thickness direction of kenaf handsheets as a fiber distribution index (FDI) and to analyze the relationship between FDI and the handsheet properties. The images of fiber distribution in z-direction were obtained by Confocal Laser Scanning Microscope (CLSM) and analyzed by image analysis technique. The proposed FDI had a good correlation with high R2 vlaues with various properties of paper, such as apparent density, scattering coefficient , burst index, tear index, tensile index, and folding endurance. The proposed FDI was shown as a good index to quantify paper properties.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.33-38
• /
• 2010

The effects of fillers on the wet end dewatering and paper properties were investigated in order to confirm the possibility that the fillers can be used as a means for saving energy in papermaking process. The performance of GCC, PCC and talcs were evaluated. The dewatering in wire and wet press was improved by the increase of filler addition, but it was observed that the dewatering behavior was depended by the filler characteristics. PCC was superior to other fillers in the bulk, opacity, air permeability and stiffness while the lowest tensile and burst index were obtained. We found that the response on the wet end dewatering and paper properties were affected greatly by the filler characteristics including particle shape and size.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.70-76
• /
• 1999

This study was to measure the potential of nonwoody fibrous material, kenaf. Whole stalk of kenaf, Hibiscus cannabinus was separated by two parts of bast and core portion, and cooked separately by alkaline method. Morphological characteristic was evaluated using confocal laser scanning microscope (CLSM) and fiber quality analyzer(FQA). The strength properties of handsheets, made by different mixing ration between kenaf base and core fibers, were measured. Cross-sectional area of bast fibers was smaller than that of core fibers, but the bast fibers had a thick cell wall and narrow lumen area. Bast fibers were longer in length than core fibers. Core fibers had thin cell walls, broad lumen areas, and short lengths, and they had collapsed shape even in water. These characteristics of core fibers affected strength properties of handsheet positively. When the amount of core fibers increased, the strength properties of handsheet were increased. When the amount of bast fibers increased, the handsheet had rougher surface and higher air permeability.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.227-231
• /
• 1999

Condebelt drying provides opportunities not only of improving the strength properties and saving of drying energy but also of reducing the basis weight or increasing the utilization of recycled furnishes. In this paper general overview of the Condebelt press drying will be described and the effects of the process variables in Condebelt press drying including drying temperature, pressure, drying time and moisture content of the sheets on the paper properties is discussed. The experiment was performed with a static rig and Korean OCC was used as a principal raw material. Significant improvement in sheet density, compression strength, tensile strength, surface smoothness, etc. was obtained when Condebelt drying was applied. Control of pressure and inlet dryness was found to be very critical in improving sheet properties. Mill experiences from Dong Il Paper Mfg. Co., Ltd is briefly described.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.445-450
• /
• 2006

The stress and strain properties of KOCC were modified to improve the performance of KOCC as a packaging raw material. The refining consistency, refining degree and the grammage of handsheet were varied. The stress strain properties, tensile energy absorption were measured for prepared handsheets. The refining improved significantly the stress and strain properties of paper, especially at lower refining consistency. The increase of grammage also had contributed to improve the stress and strain of paper. It was also found that both refining and grammage contributed to the improvement of tensile energy absorption. However, it is strongly recommended to introduce the combination of refining consistency, refining degree and mechanical treatment.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.26-32
• /
• 2000

The impact of major surface chemical properties of silica sols on the retention and drainage performance of the silica based micrparticle system, Compozil was investigated using four different silica sols. And the effect of silica properties on the interactions with cationic starch and cationic plyacrylamide has also been identified. The surface charge density and the stability over pH of silica sols were increased by introducing aluminosilicate anions at surface. It was found that the charge density of silica sols determined the addition level necessary to attain the maximum retention and drainage. When silica sols were combined with cationic starch, the change density of the product was the critical properties and the degree of microagregation was of minor importance. In the cationic polyacrylamide system the degree of colloid structure appeared to be a more critcial property than the charge density of silica sols.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 추계학술발표논문집
• /
• pp.193-199
• /
• 2006

Fruit bagging paper is used for protecting of fruits from insect and/or microorganisms. Generally, fruit bagging paper controled light, temperature and humidity and then it is used for good fruit color, size and taste. The physical properties of conventional(domestic and abroad) fruiting bag and wrapping paper were analyzed and compared to each other. And also, the optical properties of conventional(domestic and abroad) fruiting bag and wrapping paper were analyzed and compared to each other. The chemical additives and residual herbicide in conventional fruiting bag and wrapping paper were analyzed and compared to each other. The analyzed data was bench marked for developing water repelling paper and embossing paper.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.87-94
• /
• 2000

The morphological properties of the traditional handmade papers made in Korea, China and Japan were identified using CLSM(Confocal Laser Scanning Microscope). It was shown that the primary and secondary wall of the Hanji fibers were separated. The lumen of the fibers was not observed. Dochim, a traditional way of Hanji calendering, was turned out to accelerate the separation of the two walls, by which the unique effects of Dochim could be obtained. There were no separation of the two walls in Chinese handmade paper and Japanese handmade paper. Lumen was not observed in Senji fibers but it was observed in Whasi fibers. It was postulated that the morphological properties of the fibers are closely related with the calligraphic writings or drawings properties of handmade papers.