• 제목/요약/키워드: pulp modification

검색결과 56건 처리시간 0.028초

기능성 미립자의 표면개질방법에 의한 위생지 제조 (Making Hygiene Paper by Surface Modification Method of the Functional Particle)

  • 조준형;김연오;김원덕
    • 펄프종이기술
    • /
    • 제40권2호
    • /
    • pp.29-36
    • /
    • 2008
  • In order to give pulp surfaces anti-bacterial functionality and photo-catalytic deodorant ability, functional pulps was made using a surface modification method with Ag nano-colloidal solution and $TiO_2$ filler. Hygiene paper was made with the specially modified pulp, and anti-bacterial and deodorant tests were carried out. The Ag nano-colloidal solution was coated on the surface of the pulp using the high pressurized gas phase squirt through the spray nozzle mounted on the hybridization system. The surface modified functional pulp was hybridized with the optimum ratio of $TiO_2$(fine particle) to pulp(core particle) under the condition of $6,000{\sim}10,000$ rpm for $3{\sim}7$ minutes in the system. The anti-bacterial functionality of the hygiene paper was confirmed by the halo test in which the formation of the clear zone around the hygiene paper sample was observed. The inhibition growth test using MIC bioscreen C showed the inhibition growth effect of the bacteria as the reaction time was increased. The photo-catalytic effect measurement of the $TiO_2$ for 4 hours of the reaction showed $50{\sim}60%$ of decomposition rate, reaching over 60% for 5 hours of the reaction.

Quality Improvement of Rayon Grade Bamboo Pulp by Modified Bleaching

  • Tripathi, Sandeep;Mishra, Om Prakash;Sharma, Nirmal;Chakrabarti, Swapan Kumar;Varadhan, Raghavan
    • 펄프종이기술
    • /
    • 제43권2호
    • /
    • pp.1-8
    • /
    • 2011
  • The presence of high silica in bamboo hinders the use of this material for production of rayon grade pulp. Research has been carried out to overcome this deficiency and improve quality of rayon grade pulp with the modification in pulping and bleaching process. Effect of acid boosted water prehydrolysis, sulphuric acid pre-treatment of unbleached pulp, chlorination stage at lower pH and treatment of bleached pulp with $SO_2$ water were evaluated. Acid boosted water prehydrolysis of chips reduces prehydrolysis time by 50 minutes as compared to water prehydrolysis. Treatment of unbleached pulp with sulphuric acid reduces ash, acid insoluble, silica, calcium and iron contents of the pulp by 56, 31, 82, 84 and 60% respectively. The addition of acid, increase in kappa factor in $C_D$ stage and combination of both were effective in removing silica in the pulp. Treatment of final bleached pulp with $SO_2$ water removes silica to a great extent and improves optical properties of the pulp as compared to $H_2SO_4$ or PAA. Pretreatment of the pulp with acid and modification in the bleaching process can reduce silica substantially and improve the quality of rayon grade bamboo pulp.

효소처리에 의한 제지적성 개선

  • 김형진;조병묵
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2000년도 춘계학술발표논문집
    • /
    • pp.39-46
    • /
    • 2000
  • In pulp and papermaking process, enzymatic treatment of pulp fibres has been a topic of increasing interest in last decade. Lots of patents, papers and research reports were published on the application of enzymes in the fields of enzymatic bleaching, deinking, slime control, pitch control, waste water treatment and fibre modification. Cellulase and hemicellulase are the principal enzymes used for the modification of fibre property. This study was carried out for determinating the behaviors of enzyme to pulp fibres. A commercial enzyme, Denimax BT which is consisted with cellulase and hemicellulase, was treated to the kraft pulp produced from domestic hardwood mixtures. Results were mainly concentrated on the behaviors of freeness, drainability and fines content of fibres, and physical properties of paper with enzyme treatment. The freeness levels and dewatering ability were developed, and the fines contents were decreased. The creation of fines were controlled by the method of pre-enzyme treatment prior to fibre beating. The mechanical strength of paper, like tensile, burst, tear strength and folding endurance, were remarkably improved by the pre-enzyme treatment.

  • PDF

알칼리 처리가 제지용 화학펄프의 특성에 미치는 영향 (Effects of Alkaline Treatment on the Characteristics of Chemical Pulps for Papermaking)

  • 원종명;김민현
    • 펄프종이기술
    • /
    • 제43권3호
    • /
    • pp.106-112
    • /
    • 2011
  • The effects of alkaline treatment on the WRV, crystalline structure and sheet structure of softwood and hardwood bleached kraft pulp were investigated. Sodium hydroxide and sodium carbonate were used as chemicals for alkaline treatment and two levels of alkali dosage (5%, 10%) were applied respectively. Alkali treated and untreated pulp were refined to three levels (550, 450 and 350 mL CSF). WRV of the alkali treated pulps depended on the alkaline type and concentration. It was found that the crystalline structures of softwood and hardwood pulp were not changed by refining. Sodium carbonate and lower concentration of sodium hydroxide treatment did not caused any modification of cellulose crystalline structure, while higher concentration of sodium hydroxide treatment caused the partial modification of cellulose crystalline structure. Alkaline treatment of hardwood bleached kraft pulp led to the shrinkage of fiber diameter and bulky structure of sheet. Alkaline treatment of softwood bleached kraft pulp did not cause the significant change in fiber shrinkage and bulk of sheet.

White ledger 오존 탈묵의 현미경적 관찰 (Microscopic Observation of White Ledger Ozone Deinking)

  • 원종명;윤승락
    • 펄프종이기술
    • /
    • 제32권2호
    • /
    • pp.40-44
    • /
    • 2000
  • A microscopic study was carried out to get the fundamental informations for the ozone deinking technology. The differential interference microscopic observation showed that ozone treatment was helpful to detach the toner ink from the surface of pulp fiber. The modifications of fiber surfaces by ozone treatment were observed with scanning electron microscope. Modification of fiber surfaces was not severe at the early stage of ozone treatment, but it increased with ozone treatment time and pulp consistency, Therefore, it would be possible to improve the properties of deinked pulp by controlling the condtion of ozone treatment.

  • PDF

State-of-the-Art Review on High Yield Pulping Research in Japan

  • Nakano, J.
    • Journal of the Korean Wood Science and Technology
    • /
    • 제8권3호
    • /
    • pp.64-76
    • /
    • 1980
  • Fig. 8 summarizes the present status of high yield pulp production and the directions of research on modification. A thick line indicates pulping process presently in use. As mentioned previously, one kind of modification is to introduce hydrophilic groups onto the pulp. Still unsolved is whether or not the introduction of hydrophilic groups should be restricted to lignin only. Goring (28) reported that middle lamella lignin has fewer phenolic hydroxyl groups than cell wall lignin and suggested that such a difference in the lignin may be useful in the removal of middle lamella lignin. The introduction of hydrophilic groups onto pulp may not be enough to modify high yield pulp. The removal of some portion of carbohydrate may be also necessary from the standpoint of softening of pulp fibers. There is no information at what lignin and carbohydrate, and how much should be removed. The combination with synthetic high polymers may also be important in modifying high yield pulp. Prof. C. Schuerch of the State University of New York who was a visiting professor at the University of Tokyo in 1974, mentioned that the hydrophilicity of lignin would be promoted, if phenolic hydroxyl or carboxyl groups could be introduced into the aromatic nucleus of lignin. If this were possible. this process would also mean a pulp yield of more than 100%. This idea is just one example of the expectation made possible through lignin chemistry. Instead of the introduction of hydrophilic group, the oxidative degradation of aromatic nucleus of lignin may also be useful in promoting the hydrophilicity of pulp. In this case, ozone may be an excellent chemical. However, there are a lot of problems to be solved such as homogeneity of reaction and selectivity of ozone for lignin. The above ideas are summarized in Fig. 9. There are many problems to be solved in the production of an excellent high yield pulp which is comparable to chemical pulp. The information from wood chemistry hopefully will elucidate some of the problems mentioned above.

  • PDF

목질분해효소에 의한 고지의 재활용 기술연구(제2보)-조효소가 폐지의 표백 특성 및 종이의 물성에 미치는 영향- (Studies on the Recycling Technology of the Waste Paper with Wood Degradable Enzyme(II)-Effect of Crude Enzyme on the Bleaching Characteristics and Physical Properties of Waste Paper-)

  • 양재경;장준복;엄태진
    • 펄프종이기술
    • /
    • 제30권3호
    • /
    • pp.15-21
    • /
    • 1998
  • Crude enzymes of Trichoderma viride and Phanerochaete chrysosporium were evaluated for their effect to brightness and physical properties of recycled pulp from newspaper and corrugated container board. The brightness of recycled pulp from newspaper increased with crude enzymes from Trichoderma viride and Phanerochaete chrysosporium. The brightness of recycled pulp of corrugated container board increased with crude enzyme from Phanerochaete chrysosporium, but decreased with crude enzyme from Trichoderma viride. The Δbrightness with chemical bleaching of crude enzyme treated pulp was lower than that of heat killed enzyme treated pulp, but the final brightness of pulp was increased. Modification of recycled paper with crude enzymes can result in a substantial increase in physical properties with little no loss in pulp freeness.

  • PDF