• 펄프종이기술
• /
• 제45권6호
• /
• pp.44-54
• /
• 2013

Replacing OMG (old magazine) to ONP (old newspaper) by raising optical property through $CaCO_3$ in-situ precipitation method in white duplex board presents cost reduction and possible drying energy saving. The strength property impairment by the presence of $CaCO_3$ could be supplemented by the fiber furnish treatment or strength polymer addition. In $CaCO_3$ in-situ precipitation of ONP, it was found from morphological study using FlowCAM, an image analyzer, that most of calcium carbonate were formed on the fines, and made the size of the fines larger. For the case of forming calcium carbonate only on the fractionated fines, the size of the fines were the biggest, and there were more clean surface areas available for bonding for the fractionated long fibers when fractionated fibers and fines were regrouped to make paper.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.19-25
• /
• 2000

In Condebelt press drying system, the temperature difference between top and bottom plate of Condebelt transfers water to bottom side, Fine fibers, stickies , ink , and various inorganic materials are also migrated to the fine wire located at the bottom plate by highly pressurized moisture flow. As a result, the fine wire contaminated by plugging of these fine and sticky materials can cause many problems such as blistering or partial crushing of paper. The contaimination of fine wire leads to a deterioroated strength together with uneven physical properties of paper. In this paper, froth-flotatiion method, which is commonly used in the field of ONP recycling process, were adopted to separate the contaminants in KOCC as a new fiber fractionation method. Standard deviation of paper strength and brighteness decreased of Condebelt fine wire were measured to investigate the effect of contaminants removal . The standard deviations of paper strength obtained from the flotated accept were not dependent on the number of condebelt press drying . However, in the case of untreated KOCC, the standard deviations were increased as press drying repeated. This indicates that the contaminant gives uneven physical properties to the paper by wire plugging . Optical and SEM images clearly illustrate the effect of contaminants on the wire condition.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.485-488
• /
• 2006

Surface roughening which is occurred by interaction between base paper and water in coating color deteriorates surface properties of coated paper. In this study, the effect of calendering variables on surface roughening and the relationship between hot calendering and water penetration depth were investigated. BCTMP handsheets were calendered at the various conditions of temperature and linear load, and its PPS roughness was measured before and after moistening to evaluate surface roughening. To determine water penetration depth, thickness was measured from the cross sectional images of sheet which were obtained using CLSM technique. High pressure calendering was beneficial to reduce surface roughness before coating but its smoothening effect was mostly lost by contact with water. On the contrary, sheet calendered at the highest temperature showed the lowest roughening. High temperature calendering allowed the smallest penetration of water into fiber network because of sufficient deformation and densification in top side of z-direction of sheet. Consequently, hot calendering could be the effective way to reduce surface roughening and unevenness of paper surface.

• Journal of the Korean Wood Science and Technology
• /
• 제33권4호통권132호
• /
• pp.60-65
• /
• 2005

어저귀 한지의 발묵특성을 장 단섬유의 혼합비율에 따라 비교 검토하여 화선지로써의 적용 가능성을 검토하고자 하였다. 제조한 한지의 발묵특성을 검토한 결과, 인피펄프 단독으로 초지한 한지는 발묵상태가 매우 불량하여 화선지용으로는 적합하지 않은 것으로 나타났으며, 목질부 단독으로 초지한 한지의 발묵상태가 시판 화선지류보다도 훨씬 우수한 경향을 나타냈다. 강도적인 측면을 고려한다면 설포메틸 펄프화법으로 처리한 단섬유인 목질부 펄프를 60% 혼합한 어저귀 한지가 화선지용으로 적합하다고 사료된다. 펄프화 방법에 있어서도 설포메틸 펄프화법으로 초지한 한지의 발묵상태가 우수하였다. 이렇듯 한지의 발묵상태는 장섬유와 단섬유의 혼합량 및 지합과 밀접한 관련이 있다.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.5-12
• /
• 1998

Exploitation of the papermaking technology to reduce the strength loss that accompanies when using recycled papers as raw materials for papermaking is one of the most important issues imposed upon today's paper industry. Multi-layer sheet forming technology has been suggested as a way that provides some answers to this issue. In this study strength properties of single- and two-layer handsheets formed with recycled fiber and unbleached softwood kraft pulp have been examined to quantify the benefits when using two-layer sheet forming technology rather than a conventional single layer sheet forming precess. Single- and two-layer handsheets were made from 50% of OCC and 50% of Sw-UKP and their strength properties were evaluated. Also the strength properties made from Sw-UKP and OCC sheets were determined. A multihead, which can be attached on the top of hand- sheet former, was used to form two-layer sheets. Maximum strength properties could be obtained in the freeness range of 500∼300mL CSF for Sw-UKP Most of the strength properties was reduced by 30∼35% when 50% OCC was blended with UKP. Decrease of strength properties, however, could be reduced by employing a two-layer sheet forming method. Creator strengths could be obtained when UKP was positioned at the top layer of two layered sheets indicating greater UKP fines retention due to the filtration effect of the OCC layer formed prior to UKP layer contributed the strength improvement. Two-layer sheet showed lower Scott internal bond strength than single layer sheet. By incorporating some of UKP fibers into OCC layer this reduction could be reduced.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.40-48
• /
• 2011

In this study, we investigated the usability of new powdered additives in the paperboard industry. We manufactured the powdered additives from peanut husks and garlic stems by grinding. The chemical composition, particle size, particle size distribution, and particle shape were investigated to identify the basic properties of the powdered raw materials. To determine the effect of the powdered additives on paper properties, handsheets were prepared by adding the powdered additives to the pulp slurry. The chemical composition, such as the contents of holocellulose, lignin, and ash, showed similar values to those of other biomass materials. The particles of peanut husk powder were irregularly shaped, smaller, and had a broader particle size distribution than those of the garlic stem powder, which had the fibril form. The particles of the two powdered raw materials showed a positioning of expansion in the fiber network, resulting in increased bulk and a loss of strength. Handsheets containing garlic stem particles were stronger than handsheets containing peanut husk particles. Finally, the new powdered additives are beneficial to the bulk of paperboard.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.40-46
• /
• 2015

For some Korean newsprint mill, addition level of aluminum sulfate has been reduced because sulfur from aluminum sulfate has detrimental effect on the efficiency of anaerobic water treatment. At this moment, an unexpected decrease in sizing degree of TMP mixed newspaper was occurred. The phenomena means that hydrophobic substance usually originated from TMP cannot be fixed on the paper. This study focused on effect of alum and PAC on sizing of paper and contamination. Also, substitutability of PAC was discussed as a possible alternatives of aluminum sulfate under anaerobic condition of water treatment. Evaluation of sizing degree and pitch deposit potential were performed at the varied addition level of PAC and aluminum sulfate. Hydrophobic substance mainly derived from TMP could be fixed on the surface of fiber by PAC. Fines retention was not changed by replacing aluminum sulfate with PAC. Additionally, fixing of hydrophobic substance without excessive agglomeration can be enhanced by PAC with low molecular weight. Consequently, sizing degree of newspaper and contamination of recycling process of ONP can be controlled by low molecular weighted PAC.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.28-34
• /
• 2005

The purpose of the research was to examine the effect of three different levels of enzyme treatment on the physical characteristics and the end-use suitability of the lyocell fabrics made with four different types of commercial wood pulp. The appropriate enzyme concentration for obtaining an optimum as well as consistent physical characteristics and fabric hand trait was 3 g/l for the concentration levels tested in the present investigation. Weight loss was more affected by higher enzyme con­centration than other physical properties. H2 was least affected by enzyme treatment for all three physical properties and fab­ric hand. 5 g/l concentration exhibited little difference from 3 g/l in the physical characteristics, whereas the KES-FB values indicated a significant loss of fabric hand in most PHV s with the 5 g/l concentration level. Among different garment parame­ters, all four fabric types were relatively inappropriate for the men's slacks (MS) fabric due to the lower hand value of koshi required by the MS parameter. However, despite the relatively low koshi values, high fukurami values required for men's dress shirt (MWDS) resulted in the highest THV among the four garment parmeters. The four fabric types, which represent the usage of four different wood pulps, in general seem to exhibit a higher applicability to women's winter thin dress (WWTD) than women's winter suit (WWS) garment parameter.

• 펄프종이기술
• /
• 제46권5호
• /
• pp.27-34
• /
• 2014

In-situ $CaCO_3$ formation onto recycled wood pulp was studied to improve optical properties and ash attachment to the fiber furnish in papermaking. We controlled initial reaction temperature of in-situ $CaCO_3$ formation method from $30^{\circ}C$ to $50^{\circ}C$. It was found that the attachment of newly formed $CaCO_3$ to recycled fibers, old newspaper (ONP) in this case, was stronger than that of ground calcium carbonate (GCC, mean dia. $2.4{\mu}m$) addition case, but was not much different among those formed at different temperature. Morphologies of newly formed $CaCO_3$ were changed according to the reaction temperature. More aragonite shape was seen at higher temperature. In-situ $CaCO_3$ formation increased brightness and lowered ERIC value of ONP sheet greatly at the same level of ash contents when compared to GCC addition method, but gave equivalent ERIC and brightness when compared to those of the precipitated calcium carbonate (PCC) addition method. However, tensile strength of the handsheets of the in-situ $CaCO_3$ formation method were much greater than those of the PCC addition method.

• 분석과학
• /
• 제35권4호
• /
• pp.169-180
• /
• 2022

Tomato has a limited shelf life and is highly perishable due to its high moisture content. As fruit leather, is a traditional food of Nepal, it can be beneficial to move towards value addition and diversification of the traditional product. The main aim was to analyze the nutritional values and phytochemicals of the tomato pulp and prepared leather, and sensory evaluation of prepared tomato leather. Five samples A, B, C, D and E were prepared with 80:20, 72.5:27.5, 95:5, 87.5:12.5 and 65:35 fruit pulp: sugar ratio respectively. Analysis of raw tomato pulp and all the five samples was performed. Sensory quality of the product sample A was found superior to that of other samples but chemical and phytochemical properties of product sample C was found superior than that of other prepared samples. Therefore, we had two best products, in terms of sensory properties and in terms of nutritional properties. The best product on the basis of nutrients (sample C) had acidity (%), TSS (°Bx), pH, total ash content (%), crude protein (%), crude fat (%), crude fiber (%), carbohydrate (%), vitamin C (mg/100 g), total energy (Kcal/100 g), TPC (mg GAE/g of dry extract), TFC (mg QE/g of dry extract), DPPH scavenging activity (% of inhibition) and lycopene content (mg/100 g) was found to be 3.70.1, 20 ± 0.02, 3 ± 0.1, 2.30 ± 0.05, 2.69 ± 0.04, 0.87 ± 0.02, 5.46 ± 0.01, 69.68 ± 0.02, 25.17 ± 1.25, 297.31 ± 0.01, 85.35 ± 0.02, 65.39 ± 0.02, 59.23 ± 0.03 and 98.57 ± 0.02 respectively. A tasty and nutritious product of tomato, leather can be prepared which can be more appealing to the consumer.